区域运输规划模型系统

提出一种区域运输规划模型系统,以求从定量的角度,预测一个区域内的货物运输量,继而确定这些运输量对该区域内存在的多种运输方式的偏好结构,最后仿真这些运量在相应的各种运输网络上的分布情况,同时仿真模型还对运输网线路经过新建或扩建后所形成的新的运量分布进行模拟。根据运量分布情况,就可提出初步的规划建设方案。     

一种用于光传飞控系统的光纤温度传感器研究

利用半导体光吸收原理，设计出一种光纤温度传感器，它可实现强电磁干扰下高空无人机内的环境温度测量，具有体积小，结构简单的特点。该测试仪用GaAs晶片作为温度敏感元件，采用透射式结构，利用双光束补偿原理消除了光路扰动产生的误差。实验结果表明该传感器在-20-85℃的范围内有良好的温度响应。     

中国特殊经济区和海关特殊监管区的发展方向

只要符合透明度原则和非歧视原则 ,继续保留对特殊经济区的优惠政策 ,就不违背中国加入世界贸易组织《议定书》和《报告书》的有关规定 ,但应该由“地区倾斜”转向“产业倾斜” ;对保税区和出口加工区等海关特殊监管区的管理最终应该体现“境内关外”的特征 ,与国际通行规则保持一致。     

Real-time clock comparison and monitoring with multi-GNSS precise point positioning: GPS,GLONASS and Galileo

The precise point positioning (PPP) technique is widely used in time and frequency applications. Because of the real-time service (RTS) project of the International GNSS Service, we can use the PPP technique for real-time clock comparison and monitoring. As a participant in the RTS, the Centre National d’Etudes Spatiales (CNES) implements the PPPWIZARD (Precise Point Positioning with Integer and Zero-difference Ambiguity Resolution Demonstrator) project to validate carrier phase ambiguity resolution. Unlike the Integer-PPP (IPPP) of the CNES, fixing ambiguities in the post-processing mode, the PPPWIZARD operates in the real-time mode, which is also called real-time IPPP (RT-IPPP). This paper focuses on applying the RT-IPPP for real-time clock comparison and monitoring. We review the principle of real-time clock comparison and monitoring, and introduce the methodology of the RT-IPPP technique. The observations of GPS, GLONASS and Galileo were processed for the experiments. Five processing modes were provided in the experiment to analyze the benefits of ambiguity resolution and multi-GNSS. In the clock comparison experiment, the average reduction ratios of standard deviations with respect to the G PPP mode range from 9.7% to 35.0%. In the clock monitoring experiment, G PPP mode can detect clock jumps whose magnitudes are larger than 0.9 ns. The RT-IPPP technique with GRE PPP AR (G) mode allows for the detection of any clock jumps larger than 0.6 ns. For frequency monitoring, G PPP mode allows detection of frequency changes larger than 1.1 × 10⁻¹⁴. When the RT-IPPP technique is applied, monitoring with GRE PPP AR (G) mode can detect frequency changes larger than 6.1 × 10⁻¹⁵.     

含多裂纹连接结构损伤容限试验研究

 针对机翼典型对接结构,进行了平板空孔试样和螺栓搭接件在等幅谱及飞－续－飞谱下的多裂纹损伤容限试验,通过该试验开展多裂纹开裂模式及多裂纹扩展规律的试验研究,为多裂纹断裂力学理论分析、多裂纹结构剩余强度准则提供试验依据。     

不饱和聚酯树脂与双马来酰亚胺的共聚改性

利用双马来酰亚胺(BMI)作为共聚单体与不饱和聚酯(UP)树脂进行共聚反应,使其玻璃化转变温度、弹性储能模量、拉伸和弯曲性能都有大幅度的提高,尤其是70?℃下力学性能有明显改观.利用红外光谱法测定了上述共聚树脂体系中不饱和聚酯、苯乙烯、双马来酰亚胺各自双键的聚合反应程度,分别为70.83%,95.46%和97.69%.实验结果表明由于BMI的参与,大大提高了UP树脂的固化反应活性.试样的断口形貌表明上述共聚树脂呈均相组织结构.     

S-08钢真空熔模精密铸造工艺研究

通过工艺试验和系统分析,研究出一套用真空感应铸造炉生产S-08钢铸件的工艺方法,解决S—08钢真空熔模精密铸造过程中的关键工艺技术问题,使S-08钢铸造的液氧／煤油发动机低压壳体、氧主阀下壳体等关键铸件满足高压、高冲击的负荷指标。     

Structural and collisional data for Mg III and Al IV

We present in this work energy levels, oscillator strengths, radiative decay rates and fine structure collision strengths for the Mg III and Al IV ions. The 11 configurations: (1s²) 2s²2p⁶, 2s²2p⁵3l, 2s2p⁶3l, 2s²2p⁵4l   (l?n-1$l?n-1$, where n is the principal quantum number), yielding the lowest 75 levels are used. The collisional data for these two ions are missing in the literature, especially the database CHIANTI, this is the principal motivation behind the present work. Calculations have been performed using the AUTOSTRUCTURE code. AUTOSTRUCTURE treats the scattering problem in the distorted wave approach. Fine structure collision strengths are calculated for a range of electron energies from 10 Ry to 240 Ry. The atomic structure data are compared to available experimental and theoretical results.     

基于星间激光测距的三星时差定位系统标校方法

利用精确的星间激光测距信息,提出了基于星间测距的三星时差定位系统标校方法。该方法消除了副星相对位置系统误差对定位精度的影响,同时提出了副星相对位置系统误差的解析解法,建立了模型误差和对副星相对位置系统误差进行估算的误差的定量关系,并证实了基于星间激光测距的标校方法可以在较大范围内提高定位精度。     

TOPSAR data focusing based on azimuth scaling preprocessing

Both Doppler spectral aliasing and azimuth output time folding simultaneously exist in TOPSAR (Terrain Observation by Progressive Scans) raw data. Resampling in both Doppler frequency and azimuth time domain can resolve the azimuth aliasing problem but with the seriously increased computational complexity and memory consumption. According to the special characteristics of TOPSAR raw data support in the slow time/frequency domain (TFD), the presented azimuth scaling preprocessing step is introduced to not only resolve the Doppler spectral aliasing problem but also reduce the increased azimuth samples. Furthermore, the correction of sawtoothed azimuth antenna pattern (AAP) becomes easy to be implemented. The following conventional stripmap processor can be adopted to focus the residual TOPSAR raw data but with the result of azimuth aliased TOPSAR image. The mosaic approach, which has been presented to unfold azimuth aliased ScanSAR image, is exploited to resolve the problem of azimuth output folding in TOPSAR mode. Simulation results and pulse response parameters are given to validate the presented imaging approach.