舰载飞机自动着舰系统的研究

介绍了舰载飞机的自动着舰系统（包括了飞机的飞行控制系统，推力控制系统及航空母舰的导引系统），并指出只有精确地控制飞机的不滑轨迹，才能使飞机在航空母舰上安全降落，本文着得讨论俯仰指令型的纵向自动着舰系统的原理、结构及设计，并指出导引指令中对舰体运动的补偿。     

疲劳裂纹扩展随机过程相关参数的估计

对数正态随机过程模型是可靠性与损伤容限分析中常用的裂纹扩展随机模型.在裂纹扩展对数正态随机过程模型的基础上,建立了由试验数据估计一般平稳正态随机过程相关参数的方法.应用这种方法可以直接由试验数据估计随机过程的相关参数.同时,给出了用Monte-Carlo方法估算置信区间的方法.最后,给出了用具体试验数据,这组试验数据共有237个数据点,估计随机过程相关参数的算例.     

半浮区液桥自由面振荡特征

使用一套双路同步显微放大录像及图像处理系统,研究了夹角为90°的两个竖直剖面沿轴向不同高度液桥自由表面的位移振荡,得到轴向不同高度上的环向相位差,观测到在振荡周期内液桥表面轮廓线在不同时刻均不相交的特点。实验结果表明,液桥自由面振荡除具有径向扰动及轴向振荡变化外,还存在环向波动变化。根据实验结果,讨论了环向波动基本变化规律以及本实验在测量精度和测量误差方面存在的问题。     

Hybrid integration method for highly maneuvering radar target detection based on a Markov motion model

To detect highly maneuvering radar targets in low signal-to-noise ratio conditions, a hybrid long-time integration method is proposed, which combines Radon-Fourier Transform (RFT), Dynamic Programming (DP), and Binary Integration (BI), named RFT-DP-BI. A Markov model with unified range-velocity quantification is formulated to describe the maneuvering target’s motion. Based on this model, long-time hybrid integration is performed. Firstly, the whole integration time is divided into multiple time segments and coherent integration is performed in each segment via RFT. Secondly, non-coherent integration is performed in all segments via DP. Thirdly, 2/4 binary integration is performed to further improve the detection performance. Finally, the detection results are exported together with target range and velocity trajectories. The proposed method can perform the long-time integration of highly maneuvering targets with arbitrary forms of motion. Additionally, it has a low computational cost that is linear to the integration time. Both simulated and real radar data demonstrate that it offers good detection and estimation performances.     

Effects of process parameters on mechanical properties of abrasive-assisted electroformed nickel

A cathode mandrel with translational and rotational motion, which was supposed to obtain uniform friction effect on surface, was employed in abrasive-assisted electroforming for revolving parts with complex profile. The effects of current density, translational speed and rotational speed on the deposit properties were studied by orthogonal test. The tensile strength, elongation and micro hardness value were measured to find out how the factors affected the properties. The optimized results show that changes of current density affect the tensile strength of nickel layer most, while translational speed has the most remarkable influences on both elonga-tion and micro hardness. The low rotational speed affects the properties least. In this experiment, a smooth nickel layer with tensile strength 581 MPa, elongation 17%and micro hardness 248HV is obtained by the orthogonal test.     

低速大转矩永磁游标电机在发酵罐中的应用

采用秸秆生产丁醇时,为了达到高效率发酵,需要使发酵液中菌体分布均匀,所加物料需要及时搅拌。工业化生产丁醇的发酵罐尺寸较大,搅拌过程对驱动电机的输出转矩要求较高,因此高效率、小体积、低速大转矩的秸秆发酵搅拌电机对工业化发酵生产丁醇意义重大。设计了一种定转子永磁游标电机用于发酵液搅拌,并对电机的槽极数、电磁性能进行了具体的研究。制造样机并采用滞环控制实现了对液态发酵对象的快速响应,且实现了低能耗、高效率的发酵过程。     

Analyses toward factors influencing sealing clearance of a metal rubber seal and derivation of a calculation formula

Sealing clearance is a key factor for a metal rubber seal’s sealability. The expansion coef-ficient and expansion deformation in the radial direction of metal rubber have been obtained through a thermal expansion experiment of metal rubber. The influence of the elastic modulus to the sealing clearance has been analyzed theoretically. By combining the temperature and elasticity factors of metal rubber with the elastic mechanics theory, the calculation formula of the sealing clearance has been derived, and the values of the sealing clearance and the leakage rate in certain working conditions have been calculated. Experimental results are consistent with calculation results in a high degree. The calculation formula of the sealing clearance can explain the influences of the temperature and elastic modulus factors of metal rubber on the sealing clearance. It can pro-vide guidance for the study of sealing mechanism of metal rubber seals.     

Percolation transition in temporal airport network

The air transportation system has a critical impact on the global economy. While the system reliability is essential for the operational management of air traffic, it remains challenging to understand the network reliability of the air transportation system. This paper focuses on how the global air traffic is integrated from local scale along with operational time. The integration process of air traffic into a temporally connected network is viewed as percolation process by increasing the integration time constantly. The critical integration time T_P which is found during the integration process can measure the global reliability of air traffic. The critical links at T_P are also identified, the delay of which will influence the global integration of the airport network. These findings may provide insights on the reliability management for the temporal airport network.     

冲压空气涡轮释放过程运动学分析

冲压空气涡轮作为飞机上的应急能源,能在出现紧急情况时提供电能,保证飞机上电传操控和电子设备的正常工作。本文以冲压空气涡轮为研究对象,基于机械运动原理对系统模型进行了简化,基于刚体假设,结合MATLAB软件从理论上研究结构在释放过程中的运动学问题。给出了冲压空气涡轮系统释放过程中各个关节空间位置的理论求解方法,得到了关节在空间中的运动轨迹和对应的速度时间曲线、加速度时间曲线,结果表明:冲压空气涡轮系统的释放过程在1 s以内,释放速度较快,且各关节在释放初始阶段速度、加速度响应较大。本文的工作可为后期不同冲压空气涡轮系统构型的初步设计提供理论依据,指导冲压空气涡轮释放的仿真计算和试验。