直升机尾桨涡环飞行试验研究

根据样机右侧飞的飞行试验,对尾桨涡环现象进行了计算分析;根据右侧飞试验结果,估算出样机悬停回转时尾桨处于涡环状态的偏航角速度范围;将试验结果与国内外的涡环状态判据进行了对比。结果表明,国外的涡环判据不适用于样机的尾桨涡环状态判定,国内的高-辛判据与试验结果一致。     

转子-滚动轴承系统不对中-碰摩耦合故障动力学分析

建立了转子-滚动轴承系统不对中-碰摩耦合故障动力学模型.在联轴器不对中力模型中,分析了不对中力产生的原因;在转子系统中,考虑了不对中、不平衡和转静碰摩耦合故障.运用数值积分方法获取了系统的非线性动力响应,对不对中力模型和滚动轴承模型进行了验证,分析了转子不对中和碰摩对系统响应的影响,并对提出的动力学模型进行了试验验证,二者符合较好.     

复合材料桨叶固有特性计算与试验研究

直升机旋翼的固有特性是直升机动力学问题研究的基础。文中运用有限元方法分析了模型旋翼复合材料桨叶的固有特性。运用ANSYS软件计算了桨叶的固有频率和振型,并通过试验测量了桨叶的固有频率。结果表明用有限元方法计算复合材料桨叶的固有特性与试验值吻合。     

航空发动机风扇转子叶片外物损伤I.鸟撞击试验研究(英文)

本文改进了叶片鸟撞击试验条件。对某型发动机风扇一级转子叶片进行了鸟撞击试验。通过对叶片的鸟撞击瞬态响应分析和撞击前后叶片叶型变化的分析,验证了风扇一级转子叶片的抗鸟撞击性能,为某型发动机风扇转子叶片的抗外物损伤设计提供了依据。     

Nonlinear Dynamics Behaviors of a Rotor Roller Bearing System with Radial Clearances and Waviness Considered

A rotor system supported by roller beatings displays very complicated nonlinear behaviors due to nonlinear Hertzian contact forces, radial clearances and bearing waviness. This paper presents nonlinear bearing forces of a roller bearing under four-dimensional loads and establishes 4-DOF dynamics equations of a rotor roller bearing system. The methods of Newmark-β and of Newton-Laphson are used to solve the nonlinear equations. The dynamics behaviors of a rigid rotor system are studied through the bifurcation, the Poincar è maps, the spectrum diagrams and the axis orbit of responses of the system. The results show that the system is liable to undergo instability caused by the quasi-periodic bifurcation, the periodic-doubling bifurcation and chaos routes as the rotational speed increases. Clearances, outer race waviness, inner race waviness, roller waviness, damping, radial forces and unbalanced forces-all these bring a significant influence to bear on the system stability. As the clearance increases, the dynamics behaviors become complicated with the number and the scale of instable regions becoming larger. The vibration frequencies induced by the roller bearing waviness and the orders of the waviness might cause severe vibrations. The system is able to eliminate non-periodic vibration by reasonable choice and optimization of the parameters.     

转子进动分析的4个定理

建立4个关于转子进动的定理.定理1为转子进动圆的面积定理;定理2为转子进动圆的周长定理;定理3和4则描述了转子上的作用力及其所作的功与转子进动的关系.应用上述定理,对不平衡力、阻尼力和反对称交叉刚度产生的弹性力所做的功进行了分析.所得结论与经典理论一致.但发现,ω_y＜Ω＜ω_x时,由于|r_-|＞r₊|,反对称交叉刚度产生的弹性力做负功,W＜0.这种情况下,反对称交叉刚度为镇定因素,有利于抑制反进动失稳.      

Foreign Object Damage to Fan Rotor Blades of Aeroengine Part Ⅱ： Numerical Simulation of Bird Impact

Bird impact is one of the most dangerous threats to flight safety. The consequences of bird impact can be severe and, therefore, the aircraft components have to be certified for a proven level of bird impact resistance before being put into service. The fan rotor blades of aeroengine are the components being easily impacted by birds. It is necessary to ensure that the fan rotor blades should have adequate resistance against the bird impact, to reduce the flying accidents caused by bird impacts. Using the contacting-impacting algorithm, the numerical simulation is carded out to simulate bird impact. A three-blade computational model is set up for the fan rotor blade having shrouds. The transient response curves of the points corresponding to measured points in experiments, displacements and equivalent stresses on the blades are obtained during the simulation. From the comparison of the transient response curves obtained from numerical simulation with that obtained from experiments, it can be found that the variations in measured points and the corresponding points of simulation are basically the same. The deforming process, the maximum displacements and the maximum equivalent stresses on blades are analyzed. The numerical simulation verifies and complements the experiment results.     

基于遗传算法的旋转机翼飞机机翼优化设计

将基于实数编码的遗传算法与能准确描述翼型粘性流动的NS方程以及旋翼气动分析模型结合起来,以旋翼最大悬停效率作为优化设计的目标对旋转机翼飞机的机翼进行优化设计,设计结果表明通过优化设计旋翼的气动性能得到了提高,达到了优化设计的目的,旋翼优化设计方法是可行的.     

仿生四足六旋翼无人机自适应着陆性能分析

旋翼无人机在民用和军用领域被广泛应用,但传统撬式起落架在复杂地形下难以起降,为了扩大旋翼无人机的降落面积和应用范围,设计一种仿人腿式两级缓冲自适应起落架。通过对仿生腿的正逆运动学分析,提出一种自适应起落架姿态调整策略;建立仿生四足六旋翼无人机着陆动力学模型,基于多体动力学软件sim?center 3D 开展了着陆动力学仿真,并与传统撬式起落架进行着陆性能对比研究。结果表明：着陆腿式的两级缓冲自适应起落架及其姿态调整策略,能够使滚转角减小95.69%,过载系数降低34.06%,两级缓冲自适应起落架在面对复杂地形时具备主动调节姿态安全着陆的地形适应能力和极好的减震缓冲能力。     

直升机的气动弹性问题

直升机的气动弹性问题与固定翼飞机不同,不仅要考虑单片桨叶,更要将旋翼视为一个整体,考虑其动态入流、尾迹影响以及旋翼与机身之间的相互耦合等。就单片桨叶而言,在结构动力学上,需要考虑离心力场、几何非线性以及桨叶的非线性挥舞-摆振-扭转耦合;在气动力上,需要考虑动态入流以及桨尖处可能的失速效应,本质上属于非线性气动弹性力学范畴。由于旋翼气动力通常是以周期形式通过旋翼轴传给机身,并引起机身振动,而机身运动又通过改变桨叶根部形态反过来影响旋翼的气动弹性特性,这种旋翼/机身耦合问题,也是近年来直升机气动弹性问题研究中的重要方向和热点之一。此外,随着旋翼流场数值分析方法的日趋成熟,采用动态重叠网格或滑移网格方法来实现桨叶运动,并通过动网格技术来实现桨叶的弹性变形,从而实现弹性旋翼流场的数值模拟,目前正呈现出勃勃生机,成为直升机气动弹性研究的又一重要方向和热点。随着各种新构型直升机的相继出现,如倾转旋翼机、前行桨叶概念旋翼(ABC)直升机和复合式直升机等,也带来了新的气动弹性问题。不断发现问题、解决问题,推动本学科持续发展,永远是气动弹性工作者终身奋斗的目标。