温度翘曲应力对机场刚性道面寿命的影响

分析了目前中国民航机场刚性道面的设计过程,指出在设计过程中忽视温度应力的影响不合理。参照公路水泥混凝土路面温度应力计算方法并根据Miner定律研究了温度翘曲疲劳损耗对于机场刚性道面影响规律,即温度翘曲疲劳损耗随板厚、地基反应模量的增大而增大,随着混凝土设计强度的增加而降低。然后提出采用设计寿命的影响因子nt/Nt评价温度翘曲疲劳损耗对于机场刚性道面设计寿命影响的方法并提供了相应的机场刚性道面板厚度设计流程图。最后提供了一个考虑温度翘曲应力的刚性道面设计实例,为工程应用提供参考。     

Integration of lessons from recent research for “Earth to Mars” life support systems

Development of reliable and robust strategies for long-term life support for planetary exploration must be built from real-time experimentation to verify and improve system components. Also critical is incorporating a range of viable options to handle potential short-term life system imbalances. This paper revisits some of the conceptual framework for a Mars base prototype which has been developed by the authors along with others previously advanced (“Mars on Earth^®”) in the light of three years of experimentation in the Laboratory Biosphere, further investigation of system alternatives and the advent of other innovative engineering and agri-ecosystem approaches. Several experiments with candidate space agriculture crops have demonstrated the higher productivity possible with elevated light levels and improved environmental controls. For example, crops of sweet potatoes exceeded original Mars base prototype projections by an average of 46% (53% for best crop) ultradwarf (Apogee) wheat by 9% (23% for best crop), pinto bean by 13% (31% for best crop). These production levels, although they may be increased with further optimization of lighting regimes, environmental parameters, crop density etc. offer evidence that a soil-based system can be as productive as the hydroponic systems which have dominated space life support scenarios and research. But soil also offers distinct advantages: the capability to be created on the Moon or Mars using in situ space resources, reduces long-term reliance on consumables and imported resources, and more readily recycling and incorporating crew and crop waste products. In addition, a living soil contains a complex microbial ecosystem which helps prevent the buildup of trace gases or compounds, and thus assist with air and water purification. The atmospheric dynamics of these crops were studied in the Laboratory Biosphere adding to the database necessary for managing the mixed stands of crops essential for supplying a nutritionally adequate diet in space. This paper explores some of the challenges of small bioregenerative life support: air-sealing and facility architecture/design, balance of short-term variations of carbon dioxide and oxygen through staggered plantings, options for additional atmospheric buffers and sinks, lighting/energy efficiency engineering, crop and waste product recycling approaches, and human factor considerations in the design and operation of a Mars base. An “Earth to Mars” project, forging the ability to live sustainably in space (as on Earth) requires continued research and testing of these components and integrated subsystems; and developing a step-by-step learning process.     

A theoretical model of semi-elliptic surface crack growth

A theoretical model of semi-elliptic surface crack growth based on the low cycle strain damage accumulation near the crack tip along the cracking direction and the Newman–Raju formula is developed. The crack is regarded as a sharp notch with a small curvature radius and the process zone is assumed to be the size of cyclic plastic zone. The modified Hutchinson, Rice and Rosengren(HRR) formulations are used in the presented study. Assuming that the shape of surface crack front is controlled by two critical points: the deepest point and the surface point.The theoretical model is applied to semi-elliptic surface cracked Al 7075-T6 alloy plate under cyclic loading, and five different initial crack shapes are discussed in present study. Good agreement between experimental and theoretical results is obtained.     

Analysis of crack opening stresses for center- and edge-crack tension specimens

Accurate determination of crack opening stress is of central importance to fatigue crack growth analysis and life prediction based on the crack-closure model. This paper studies the crack opening behavior for center- and edge-crack tension specimens. It is found that the crack opening stress is affected by the crack tip element. By taking the crack tip element into account, a modified crack opening stress equation is given for the center-crack tension specimen. Crack surface displace- ment equations for an edge crack in a semi-infinite plate under remote uniform tension and partially distributed pressure are derived by using the weight function method. Based on these displacements, a crack opening stress equation for an edge crack in a semi-infinite plate under uniform tension has been developed. The study shows that the crack opening stress is geometry-dependent, and the weight function method provides an effective and reliable tool to deal with such geometry depen- dence.     

Storage life of silicone rubber sealing ring used in solid rocket motor

It is urgent to carry out detailed research on storage performance of rubber sealing ring to get the criterion for its storage life. This paper acquires material ageing regularity by theoretical analysis and experimental confirmation. On this condition, failure mode and failure criterion of typical sealing structure is studied, and the failure mechanism is found. Thus by analyzing the stress distribution, the relationship between ageing state and sealing condition is established. Rationalization proposal is put forward and storage life of sealing ring is evaluated. The research mentionedabove has special reference to the design of sealing structures and can provide reference for prolonging their service life.     

舰载直升机金属动部件寿命控制技术研究

在分析现役老龄化舰载直升机动部件载荷特点的基础上,结合直升机所处的海洋腐蚀环境,讨论了舰载直升机的损伤类型和损伤容限寿命管理方法在其寿命分析中的应用,比较了损伤容限法应用于舰载直升机动部件与应用于固定翼飞机的不同点,重点讨论了损伤容限方法应用于工程实践亟待解决的关键技术。     

基于损伤力学预估点蚀疲劳寿命有限元法

飞机使用环境谱的不断变化会对机体结构造成腐蚀损伤,工程上难以在外场环境下进行实时损伤检测与疲劳性能试验。点蚀作为腐蚀的初始阶段,危害性大,部位也难以预测。采用损伤力学和有限元相结合的方法,以材料疲劳S-N数据为基础,将点蚀损伤认为是一种初始缺陷,建立基于损伤力学假设的点蚀损伤疲劳寿命预估方法,并提出一种改进型损伤参数反演方法。对点蚀疲劳失效过程进行数值模拟,模拟结果与试验结果吻合,证明该方法应用于金属材料点蚀疲劳问题中是合理的、可行的,为后续实际预腐蚀损伤疲劳研究奠定了基础。     

微小推力下小卫星的轨道递推与推力标定

针对采用微小推力进行轨道机动的小卫星,考虑复杂摄动力的基础设计了一种高精度轨道外推和推力在轨标定算法.首先,建立了考虑地球复杂摄动力和微小推力的小卫星轨道动力学模型;然后基于动力学模型,利用变步长龙格库塔算法,设计了对微小推力小卫星进行高精度轨道外推的方法.随后通过无迹卡尔曼滤波器(UKF),设计在轨标定算法,对存在误...     

Assessing the feasibility of involving gaseous products resulting from physicochemical oxidation of human liquid and solid wastes in the cycling of a bio-technical life support system

The study addresses the possible ways of involving gaseous products produced by “wet” incineration of human wastes mixed with H₂O₂ in an alternating electric field in the cycling of the physical model of a bio-technical life support system (BTLSS). The resulting gas mixture contains CO₂ and O₂, which are easily involved in the cycling in the closed ecosystem, and NH₃, which is unacceptable in the atmosphere of the BTLSS. NH₃ fixation has been proposed, which is followed by nitrification and involvement of the resulting products in the mass exchange of the closed system. Experiments have been performed to show that plants can be grown in the atmosphere resulting from the closing of the gas loop that includes a physicochemical installation and a growth chamber with plants representing the phototrophic compartment of the BTLSS. The results of the study suggest the conclusion that the proposed method of organic waste oxidation can be a useful tool in creating a physical model of a closed-loop integrated BTLSS.     

Evaluation of the IRI model for the European region

The aim of this paper is to investigate various aspects of the International Reference Ionosphere (IRI) performance in European area and to evaluate its accuracy and efficiency for: long term prediction of the critical frequencies foF2 and the maximum usable frequencies (MUF); using storm-time correction option (ST); the total electron content (TEC) and the maximum observable frequency (MOF) updating. Data of foF2, TEC, MOF are related to 2005. It is obtained that median values of foF2 can be predicted with the mean error σ(med)∼ 0.49 MHz. For median values of MUF absolute σ was 1.39 MHz and relative σ_r was 8.8%. For instanteneous values estimates are increased to 1.58σ(med) MHz for foF2 and could reach 3.84 MHz for MUF. Using correction ST-option and TEC values provided ∼30% improvement but TEC seems to be more preferable. However, from considered parameters of the IRI updating (ST-factor, TEC, MOF) the best results were demonstrated by MOF. Using the IRI2007 to calculate TEC gives 20–50% improvement of TEC correspondence to experimental values but this improvement is not enough to treat TEC without the IRI model adaptation.