人力资源管理中培训方法评述

人力资源培训的方法多种多样,内容十分丰富。选择适合组织内受训人员特点的培训方法,是人力资源培训的重要原则。传统的培训方法包括很多种,这些方法分别侧重于技术技能培训和知识的提高。各种科学技术,尤其是计算机技术被应用到人力资源的培训中,形成了许多新兴的培训方法。这些新兴的方法依靠组织大量的投资得以实现,但同时也起到了传统培训方法所无法起到的作用。无论是传统的培训方法,还是新兴的培训方法,都有各自的优点和不足。因此,对人力资源培训方法的不断创新,将成为组织人力资源培训的未来发展趋势。     

热防护系统的硅纤维隔热层复合传热数值计算

鉴于热防护系统的硅纤维隔热层是各向异性的非灰体材料，其复合传热计算是复杂且耗时的，提出了一种简便方法用于硅纤维这类各向异性非灰体材料的复合传热计算。该方法借鉴了医学领域断层摄影法（局部X射线检测法）中对光沿各向异性散射介质传播分析的思路，得到了各向异性扩散的热辐射方程（RTE—D）并把该方程用于求解非灰体半透明介质的辐射热通量。计算结果与文献中基于辐射传递方程（RTE）求得辐射热流的复合传热数值结果相比较，其最大相对误差为1．5％，并且其计算时间也由Pentium Ⅱ的3297．66分钟缩短为PentiumⅣ的约5分钟。最后，该方法被用于真实热环境下刚性隔热瓦L1900（高空隙率硅纤维隔热材料）的复合传热计算，计算结果与实验数据有较高吻合度。数据结果表明，各向异性的扩散近似被用于求解非灰体半透明介质的辐射热通量的方法用在热防护系统的硅纤维隔热层复合传热数值计算中是简便高效的。     

Comparison of alternative route selection strategies based on simulation optimization

Air traffic flow management (ATFM) is a collaborative process between the airspace provider and the airspace users. The result of the collaboration should be an outcome that maxi-mizes the utility of the system without excessively penalizing any of the agents. This paper develops a discrete-event simulation model which consists of aggregate departure/arrival airports, flight routes, and sectors for evaluating the alternative collaborative route selection strategy. Given the different perspectives from air traffic control center (ACC) and airlines, eight performance-metrics and five alternative route selection strategies represent the past, current and proposed air traffic flow management operations that were evaluated. The Monte Carlo method combined with the Optimal Computing Budget Allocation (OCBA) simulation optimization technique is employed to assess the performance of different strategies. A case study of the upper air routes in central and southern China shows that the proposed model can be readily implemented to simulate different kinds of air traffic flow management strategies and predict the effect of changes on the airspace sys-tem. It also shows that the proposed alternative collaborative route selection strategy is an effective way in alleviating the en-route traffic congestion.     

A critique of reliability prediction techniques for avionics applications

Avionics (aeronautics and aerospace) industries must rely on components and systems of demonstrated high reliability. For this, handbook-based methods have been traditionally used to design for reliability, develop test plans, and define maintenance requirements and sustainment logistics. However, these methods have been criticized as flawed and leading to inaccurate and misleading results. In its recent report on enhancing defense system reliability, the U.S. National Academy of Sciences has recently discredited these methods, judging the Military Handbook (MIL-HDBK-217) and its progeny as invalid and inaccurate. This paper discusses the issues that arise with the use of handbook-based methods in commercial and military avionics applications. Alternative approaches to reliability design (and its demonstration) are also discussed, including similarity analysis, testing, physics-of-failure, and data analytics for prognostics and systems health management.     

Development of a coupled supersonic inlet-fan Navier–Stokes simulation method

A coupled supersonic inlet-fan Navier–Stokes simulation method was developed by using COMSOL-CFD code. The flow turning, pressure rise and loss effects across blade rows of the fan and the inlet-fan interactions were taken into account as source terms of the governing equations without a blade geometry by a body force model. In this model, viscous effects in blade passages can also be calculated directly, which include the exchange of momentum between fluids and detailed viscous flow close to walls. NASA Rotor 37 compressor test rig was used to validate the ability of the body force model to estimate the real performance of blade rows. Calculated pressure ratio characteristics and the distribution of the total pressure, total temperature, and swirl angle in the span direction agreed well with experimental and numerical data. It is shown that the body force model is a promising approach for predicting the flow field of the turbomachinery. Then, coupled axisymmetric mixed compression supersonic inlet-fan simulations were conducted at Mach number 2.8 operating conditions. The analysis includes coupled steady-state performance, and effects of the fan on the inlet. The results indicate that the coupled simulation method is capable of simulating behavior of the supersonic inlet-fan system.     

无网格方法中含参数指数权函数的研究

选择合适的权函数及相应的影响半径是无网格方法中很重要的问题,在引入数值紧支域概念的基础上分析了含参数的指数权函数中参数的选取范围,综合考虑计算效率和精度后给出了参数的选取原则,并讨论了在特定的参数下的最优半径以及不同参数对最优半径的影响.     

复合材料缠绕制品性能测试

本文对复合材料缠绕制品力学性能、耐燃烧性、吸水性、老化性能的测试进行了论述,这些试验方法、标准将为缠绕制品的可靠性的进一步研究奠定实验基础。     

Gaseous cavity at the base of an underwater projectile

The problem of the behavior of the gaseous cavity which is formed at the base of an underwater launched projectile is treated using different approaches. Asymptotic analysis is used to yield expressions for similarity parameters and a simplified hydrodynamic model of the initial stretching phase. A laboratory facility is described, in which launches can be simulated and analyzed by means of pressure measurements and high speed visualizations. Complete calculations are also performed using a numerical “Volume of Fluid” model solving the unsteady Navier-Stokes equations. Results from the three approaches are presented and compared during the cavity stretching phase. Finally, the thermodynamic aspects of the problem are examined.     

FINITE DIFFERENCE MODEL FOR SIMULATION OF DENSIFYING CARBON-CARBON COMPOSITES BY CHEMICAL VAPOR INFILTRATIONP ROCESSES

ＮｏｍｅｎｃｌａｔｕｒｅｓＡ０—ｃｏｅｆｉｃｉｅｎｔｏｆｔｈｅＡｒｈｅｎｉｕｓｅｑｕａｔｉｏｎＣ（ｎ）—ｈｙｄｒｏｃａｒｂｏｎｃｏｎｃｅｎｔｒａｔｉｏｎｉｎｕｎｉｔ（ｎ）（ｍｏｌ／ｃｍ３）Ｃ０—ｈｙｄｒｏｃａｒｂｏｎｃｏｎｃｅｎｔｒａｔｉｏｎａｔｅｘ...