In Memoriam: Herbert L. Pick,Jr. (1930–2012)

ABSTRACT

Fictive motion in language (as in “the ridge went north”) is claimed to reflect the attention focus of the observer on the extension and spatial layout of an entity. This paper investigates fictive motion in alpine narratives, which describe the experience of moving in a very specifically structured space. We examine space properties that are highlighted through fictive motion in this specific context and describe how they go beyond spatial extension. We further report the communicative motivation behind the use of fictive motion, ranging from conveying the sense of place to encoding the full spatial footprint of a motion event.     

螺纹紧固件耐久性分析方法的实验研究

本文在实验的基础上，提出了应用于螺栓螺纹表面裂纹上一种抗疲劳分裂研究方法－－耐久性损伤分析方法，考虑了一个新的耐久性损伤模型，螺纹圆角处开裂，把适用于紧固孔上小裂纹模型上的理论方法发展延伸至螺纹圆角模型大裂纹上，并通过实验得到了验证。同时给出了一个例子，预测结果与实验结果拟合得很好，为带螺纹紧固件的耐久性分析方法的研究提供了一种可行的方法。     

复杂可修系统效能中可信度矩阵的构造方法

复杂可修系统可信度建模对保证效能的定量分析至关重要.本文在考虑不同维修状况的基础上,着重对不同任务剖面内相应任务阶段中武器装备可信度进行了深入的定量分析和综合,进而构造出武器装备的可信度矩阵,用于武器装备的效能分析;文中以某地面车辆为例,进一步论证了武器装备可信度矩阵的工程含义,旨在为合理确定一大类武器装备的效能和可信度指标提供理论依据.     

左、右手媒质间电磁传输特性的对比分析

文章通过重新表述折射率，对比分析了左、右手媒质不同组合情况下，电磁波在媒质界面上的折射特性。通过引入色散关系的时域有限差分法对无限大左手介质板以及线源置于左手媒质覆层内两种模型进行了模拟，模拟结果与分析相符合。分析表明，负折射现象出现在界面两侧媒质类型（LHM／RHM或RHM／LHM）不同的情况下。对于同种类型媒质的情况，左手媒质并不能引起反常的折射现象。LHM引起的反常现象通过与RHM的对比才能得以有效考察。     

中国核电厂操作员反应时认知模型的应用(英文)

讨论了一些有关人员行为与时间有依赖关系的可靠性模型；给出了中国核电厂操作员在清华大学培训模型机上的一些可靠性实验结果。此外，还根据已获得的实验数据计算了在ＡＴＷＳ事故条件下人的失误概率。     

Comparison of decision tree methods for finding active objects

The automated classification of objects from large catalogs or survey projects is an important task in many astronomical surveys. Faced with various classification algorithms, astronomers should select the method according to their requirements. Here we describe several kinds of decision trees for finding active objects by multi-wavelength data, such as REPTree, Random Tree, Decision Stump, Random Forest, J48, NBTree, AdTree. All decision tree approaches investigated are in the WEKA package. The classification performance of the methods is presented. In the process of classification by decision tree methods, the classification rules are easily obtained, moreover these rules are clear and easy to understand for astronomers. As a result, astronomers are inclined to prefer and apply them, thus know which attributes are important to discriminate celestial objects. The experimental results show that when various decision trees are applied in discriminating active objects (quasars, BL Lac objects and active galaxies) from non-active objects (stars and galaxies), ADTree is the best only in terms of accuracy, Decision Stump is the best only considering speed, J48 is the optimal choice considering both accuracy and speed.     

热-机耦合分析的有限元法及其应用

基于有限元分析的基本原理,建立了热-机耦合问题分析的有限元基本方程,并对工件挤压过程及摩擦制动问题进行了分析。算例表明,热-机耦合分析方法能很好地模拟受热结构的温度场和应力应变场,为结构设计和工艺设计提供依据。     

结构比强度及其在优化设计中的应用

本文从结构重量角度推导了比强度(含比模量)表达式,分析了对同一材料不同比强度的关系,给出了比强度在结构动态分析中及结构优化设计中的应用。     

Singularity analysis for single gimbal control moment gyroscope system using space expansion method

Control Moment Gyroscope (CMG) is an effective candidate for agile satellites and large spacecraft attitude control because of its powerful torque amplification capability. The most serious situation, however, in using CMG is the inherent geometric singularity problem, where there’s no torque output along a particular direction. Space expansion method has been proposed in this work for the singularity analysis. Based on inverse mapping transformation, an expanded Jacobian matrix which is a full rank square matrix is obtained. The singular angle sets of the 3-parallel cluster and pyramid cluster are distinguished using space expansion method. An effective hybrid steering strategy, able to deal with the elliptic singularity, is further proposed. Simulation results demonstrate the excellent performance of the proposed steering logic compared to the generalized singular robust logic and pseudo inverse logic in terms of energy consumption and torque error.     

Experimental investigation and correlation development of jet impingement heat transfer with two rows of aligned jet holes on an internal surface of a wing leading edge

Extensive experimental studies on the heat transfer characteristics of two rows of aligned jet holes impinging on a concave surface in a wing leading edge were conducted, where50000 Rej 90000, 1.74 H/d 27.5, 66° a 90°, and 13.2 r/d 42.03. The finding was that the heat transfer performance at the jet-impingement stagnation point with two rows of aligned jet holes was the same as that with a single row of jet holes or the middle row of three-row configurations when the circumferential angle of the two jet holes was larger than 30°. The attenuation coefficient distribution of the jet impingement heat transfer in the chordwise direction was so complicated that two zones were divided for a better analysis. It indicated that: the attenuation coefficient curve in the jet impingement zone exhibited an approximate upside-down bell shape with double peaks and a single valley; the attenuation coefficient curve in the non-jet impingement zone was like a half-bell shape, which was similar to that with three rows of aligned jet holes; the factors,including Rej, H/d and r/d, affected the attenuation coefficient value at the valley significantly.When r/d was increased from 30.75 to 42.03, the attenuation rates of attenuation coefficient increased only by 1.8%. Consequently, experimental data-based correlation equations of the Nusselt number for the heat transfer at the jet-impingement stagnation point and the distributionof the attenuation coefficient in the chordwise direction were acquired, which play an important role in designing the wing leading edge anti-icing system with two rows of aligned jet holes.