逆向喷流对双锥导弹外形减阻特性的影响

逆向喷流是一种主动流动控制技术，具有减阻降热特性，可用于高超声速飞行器设计。以典型双锥导弹外形的球头、单锥、双锥（全弹）为研究对象，将喷流发生器和弹体固连，采用CFD方法对逆向喷流的减阻特性进行了数值研究，对比分析了喷流马赫数、喷流压比等参数对不同对象减阻效果的影响。结果表明：逆向喷流流场存在长、短射流穿透两种模态；球头在小压比长射流模态时的减阻效果最佳；单锥和双锥在大压比短射流模态时的减阻效果更好。存在一个最佳压比，使得逆向喷流的减阻效果最佳；喷流压力过大，减阻效果变差，甚至出现阻力系数不降反增情形。逆向喷流减阻效果对控制体选取敏感，若将逆向喷流对头部的减阻特性（超过40%）直接推广至飞行器整机（6%左右），评估结果过于乐观。综合最佳减阻效果、最佳喷流压比、流量与所需储气瓶体积等影响因素，工程应用时逆向喷流应优先选用声速喷流。     

Decentralized differential drag based control of nanosatellites swarm spatial distribution using magnetorquers

Nanosatellites in the swarm initially move along arbitrary unbounded relative trajectories according to the launch initial conditions. Control algorithms developed in the paper are aimed to achieve the required spatial distribution of satellites in the along-track direction. The paper considers a swarm of 3U CubeSats in LEO, their form-factor is suitable for the aerodynamic control since the ratio of the satellite maximum to minimum cross-section areas is 3. Each satellite is provided with the information about the relative motion of neighboring satellites inside a specified communication area. The paper develops the corresponding decentralized control algorithms using the differential drag force. The required attitude control for each satellite is implemented by the active magnetic attitude control system. A set of decentralized control strategies is proposed taking into account the communicational constraints. The performance of these strategies is studied numerically. The swarm separation effect is demonstrated and investigated.     

Analysis of the orbit lifetime of CubeSats in low Earth orbits including periodic variation in drag due to attitude motion

It is estimated that more than 22,300 human-made objects are in orbit around the Earth, with a total mass above 8,400,000 kg. Around 89% of these objects are non-operational and without control, which makes them to be considered orbital debris. These numbers consider only objects with dimensions larger than 10 cm. Besides those numbers, there are also about 2000 operational satellites in orbit nowadays. The space debris represents a hazard to operational satellites and to the space operations. A major concern is that this number is growing, due to new launches and particles generated by collisions. Another important point is that the development of CubeSats has increased exponentially in the last years, increasing the number of objects in space, mainly in the Low Earth Orbits (LEO). Due to the short operational time, CubeSats boost the debris population. One of the requirements for space debris mitigation in LEO is the limitation of the orbital lifetime of the satellites, which needs to be lower than 25 years. However, there are space debris with longer estimated decay time. In LEÓs, the influence of the atmospheric drag is the main orbital perturbation, and is used in maneuvers to increment the losses in the satellite orbital energy, to locate satellites in constellations and to accelerate the decay.The goal of the present research is to study the influence of aerodynamic rotational maneuver in the CubeSat?s orbital lifetime. The rotational axis is orthogonal to the orbital plane of the CubeSat, which generates variations in the ballistic coefficient along the trajectory. The maneuver is proposed to accelerate the decay and to mitigate orbital debris generated by non-operational CubeSats. The panel method is selected to determine the drag coefficient as a function of the flow incident angle and the spinning rate. The pressure distribution is integrated from the satellite faces at hypersonic rarefied flow to calculate the drag coefficient. The mathematical model considers the gravitational potential of the Earth and the deceleration due to drag. To analyze the effects of the rotation during the decay, multiple trajectories were propagated, comparing the results obtained assuming a constant drag coefficient with trajectories where the drag coefficient changes periodically. The initial perigees selected were lower than 400 km of altitude with eccentricities ranging from 0.00 to 0.02. Six values for the angular velocity were applied in the maneuver. The technique of rotating the spacecraft is an interesting solution to increase the orbit decay of a CubeSat without implementing additional de-orbit devices. Significant changes in the decay time are presented due to the increase of the mean drag coefficient calculated by the panel method, when the maneuver is applied, reducing the orbital lifetime, however the results are independent of the angular velocity of the satellite.     

变体翼梢小翼的减阻机理数值模拟

总结了对翼梢小翼减阻效果影响最大的几何参数,在此基础上采用数值模拟方法研究了这些几何参数的最佳变化范围,为变体翼梢小翼设计提供理论依据.并从气动性能、气动载荷分布和翼尖涡的角度探讨了变体翼梢小翼相对传统翼梢小翼的优缺点.结果表明:在飞机的起飞阶段,变体翼梢小翼的减阻效率比传统翼梢小翼高2.2%,同时将翼尖涡强度降低了15%,有利于提高飞机的燃油效率和机场空域安全;但也会增大机翼的翼根弯矩,因此必须权衡变体翼梢小翼带来的气动收益与结构强度不利因素.     

直接蒸发冷却系统数学模型在工程实际中的应用

采用数值模拟的方法对直接蒸发冷却系统进行研究，建立起数学模型，并用该模型对西北地区四个城市使用直接蒸发冷却空调器的降温效果进行了模拟和预测，绘出了预测曲线，可以为工程设计提供参考和指导。     

面积律设计概念与工程应用

介绍了面积律概念及相应的计算方法。指出按照近于Sears-Haack面积分布的当量旋成体设计的飞机组合体可以实现跨、超音速最小波阻。描述了面积律的工程应用，涉及设计步骤、目标面积分布控制以及“局部”面积律在高亚音速飞机上的应用等工程设计问题。     

稀颗粒群双流体模型应用于底部排气弹减阻性能研究

依据稀颗粒群假定下的双流体简化模型，采用NND和Mac Cormack方法，本文对底部排气弹底减阻性能进行了研究。分析了非平衡气－粒两相流中颗粒相浓度变化对底排弹减阻性能的影响。和实验比较，稀颗粒群条件下的数值研究更接近实际结果。     

飞翼布局组合舵面航向控制特性综合研究

寻求高效实用的航向控制措施一直是飞翼布局飞行器设计的难点。提出了一种由外翼上翼面嵌入式阻力舵和其相对应的后缘副翼组成的组合舵航向控制措施,通过CFD方法、风洞试验和模型飞行试验3种研究手段,综合研究了单独部件和组合舵在低速、亚声速时的航向控制特性。结果表明：单独阻力舵的航向控制能力比较强,但与纵横向力矩耦合严重,需与其他舵组合使用;单独副翼的航向控制能力很弱,且与纵横向力矩耦合非常严重,建议不单独作为航向控制措施使用;组合舵的航向控制能力强,选取阻力舵与副翼的舵偏角角度差在0°~5°范围的组合舵方案,可以大幅度削弱与纵横向的力矩耦合程度,实现操纵舵面解耦设计;无论单独部件,还是组合舵,舵偏角为0°~6°范围的力矩变化规律较差,建议通过预置舵偏角等方式避开此角度区域。     

火箭煤油热裂解研究

为了探究火箭煤油热裂解过程以及抗氧化剂对热裂解过程的影响,通过火箭煤油静态热裂解实验研究了火箭煤油在683K～713K条件下裂解转化率、裂解产气率、气相产物组成随温度和时间的变化规律。同时,对比了加入1wt%抗氧化剂邻甲基对苯二酚(THQ)的火箭煤油热裂解行为,发现THQ对火箭煤油热裂解有明显抑制作用。683K～713K下,火箭煤油添加1wt%THQ前后的裂解活化能分别为150.0kJ/mol和210.5kJ/mol,并获得了相应的Arrhenius热裂解方程。对比发现我国火箭煤油裂解速率常数小于美国RP-1,RP-2火箭煤油。     

民用飞机辅助发电机多功能试验装置的设计与实现

根据民用飞机辅助发电机(APU GEN)试验需求,设计并实现了专用于APU GEN试验的APU GEN多功能试验装置,该装置可远程操控,不仅具有冷却功能和加热保温功能,而且还具有润滑油流量连续可调节功能、联锁控制以及保护功能,能较好地满足APU GEN的试验需求。该装置的成功实现,不仅保障了民用飞机电源系统设计验证工作,而且还积累了我国民用飞机电源系统试验配套设施研制经验,对我国民用飞机电源系统试验具有重要的指导意义。