数控机床及工装的发展与创新设计

在现代数控加工中,由于被加工件的精度要求以及复杂度不断提高,传统加工系统无法满足使用需求,为解决这一问题,数字控制系统的核心算法以及驱动系统得到了快速发展,一些创新机构也应用到了数控机床的整机结构设计中.这些解决措施大幅提升了被加工件的精度和表面质量,促进了市场上一系列新型数控机床的出现,如复合机床、镜像铣削机床等,与之配合的新型加工工装技术也取得了相应的突破.     

基于层次评估理论的弹道导弹末段突防制导律研究

针对弹道导弹末段突防问题,应用层次性能评估体系,对弹道导弹末段典型突防制导律进行对比分析.并通过对弹道导弹制导精度、弹道导弹最大过载、弹道飞行时间和反导导弹脱靶量以及它们的均值、均方差的重要性和需求性分析,合理设置评估体系的指标及其权值,应用随机仿真分析方法,对比仿真经典比例导引、修正比例导引和变结构比例导引三种突防制导律的性能.仿真结果证明,层次评估理论可以用于弹道导弹末段突防制导律的评估及优选.     

基于等 Weber 数的结冰外形修正

由于设备条件的限制,在进行结冰风洞试验时,试验 Weber 数与目标 Weber 数往往存在差异,为了获得与目标 Weber 数对应的冰形,需要对试验结果进行修正。本文分析了进行 Weber 数修正的原因,提出了根据几何特征量进行结冰外形修正的方法,并以某超临界翼型为对象,对不同 Weber 条件下的结冰外形进行了仿真,研究了Weber 数变化对结冰的影响规律,在此基础上开展了基于等 Weber 数的结冰外形修正。研究发现：(1)Weber 数主要影响冰角特征,对水滴收集特性、结冰极限及驻点冰厚度影响较小;(2)存在一个敏感 Weber 数,低于敏感值时, Weber 数变化对结冰影响不大,当 Weber 数高于敏感值时,Weber 数变化对结冰有明显影响;(3)采用本文提出的冰形修正方法,能保证冰形的宏观轮廓与目标冰形一致,修正后的冰形能适量消除由于 Weber 数误差导致的冰形差异,提高试验的精度。     

Dynamic modeling and analysis of vortex filament motion using a novel curve-fitting method

Applications of a novel curve-fitting technique are presented to efficiently predict the motion of the vortex filament, which is trailed from a rigid body such as wings and rotors. The governing equations of the motion, when a Lagrangian approach with the present curve-fitting method is applied, can be transformed into an easily solvable form of the system of nonlinear ordinary differential equations. The applicability of Be′zier curves, B-spline, and Lagrange interpolating polynomials is investigated. Local Lagrange interpolating polynomials with a shift operator are proposed as the best selection for applications, since it provides superior system characteristics with minimum computing time, compared to other methods. In addition, the Gauss quadrature formula with local refinement strategy has been developed for an accurate prediction of the induced velocity computed with the line integration of the Biot–Savart law. Rotary-wing problems including a vortex ring problem are analyzed to show the efficiency, accuracy, and flexibility in the applications of the proposed method.     

大型飞机迎角保护控制律设计及试飞技术研究

针对大型飞机迎角保护控制律设计及试飞问题,通过杆位移-过载梯度的实时精确调整及取大值逻辑指令切换,设计了迎角保护控制律,实现拉杆到底飞机迎角达到且不超过限制迎角的目的。根据迎角保护控制律的功能及试飞目的,将整个试飞过程分为三个阶段,研究了各个阶段的试飞技术。仿真结果表明,所设计的控制律能够实现迎角保护功能,具有良好的控制效果。     

三维自适应终端滑模协同制导律

针对多枚导弹协同作战的问题,且多枚导弹之间保持有向拓扑通信的条件下,基于终端滑模法设计了视线方向及视线法向的双层协同制导律。其中,视线方向的制导指令能够保证导弹同时完成拦截任务;视线法向上的三维制导律能够保证每枚导弹以期望的视线角攻击目标,从而发挥各枚导弹的最大杀伤力,并且视线角的约束相当于规划了末制导段导弹的弹道问题,在一定程度上避免攻击目标前导弹间发生碰撞。同时,针对所设计的滑模制导律设计了新的自适应律,从而加快了滑模面的收敛速度并且削弱了由符号函数引起的系统抖振现象。基于李雅普诺夫稳定性理论,证明了所设计制导律的正确性,并在最后给出了数学仿真实验,验证了所设计制导律的有效性及优越性。     

Optimization and verification of free flight separation similarity law in high-speed wind tunnel

Based on the similarity of separation time, a similarity law optimization method for high-speed weapon delivery test is derived. The typical separation state under wind load is simulated by the numerical method. The real separation data of aircraft, separation data of previous test methods, separation data of ideal wind tunnel test of previous methods, and simulation data of the proposed optimization method are obtained. A comparison of the data shows that the method proposed can improve the performance of tracking. Similarity law optimization starts with the development of motion equations and dynamic equations in the windless state to address the problems of mismatching between vertical and horizontal displacement, and to address the problems of separation trajectory distortion caused by insufficient gravity acceleration of the scaling model of existing light model. The ejection velocity of the model is taken as a factor/vector, and is adjusted reasonably to compensate the linear displacement insufficiency caused by the insufficient vertical acceleration of the light model method, so as to ensure the matching of the vertical and horizontal displacement of the projectile, and to improve the consistency between the test results of high-speed projection and the actual separation trajectory. The optimized similarity law is applicable to many existing free-throwing modes of high-speed wind tunnels. The optimized similarity law is not affected by the ejection velocity and hanging mode of the projectile. The optimized similarity law is suitable not only for the launching of the buried ammunition compartment and external stores, but also for the test design of projectile launching and gravity separation.     

基于分数阶微积分理论的最优导引律设计

随着技术的发展及战场环境的日益复杂化,拦截机动目标的需求越来越大。然而传统制导律在拦截机动目标时存在制导精度差、末端过载突变的问题,故提出了一种基于分数阶微积分理论的最优导引律。首先,介绍了分数阶微积分的定义、性质及其数字实现方法;然后,分析了弹目相对运动关系,通过分数阶变阶次建模和最优控制理论推导出了分数阶导引律;最后,仿真结果表明：与传统比例导引法相比,所设计的分数阶最优导引律能够保持比例导引法良好的追踪性能且拦截时间能够缩短2s,末端过载值趋近于0。该方法解决了传统比例导引法在末端由视线角速率发散而导致的末端过载突变问题。     

基于双框架控制力矩陀螺的航天器动量管理

为减小维持大型航天器的姿态稳定和降低能量消耗的动量管理中的扰动力矩对姿态稳定的干扰,设计了周期性抑制滤波器。姿态控制的执行机构采用双框架控制力矩陀螺群（DGCMGs）,应用KENNEL操纵率,使航天器执行机构的角动量在本体系的x轴分量和偏航角可达稳定,同时角动量在本体系的z轴分量和滚转角可在较小的范围内振荡。数值仿真结果验证了方案的可行性。