发动机燃烧室声阻尼试验技术研究

依据振动和声学基本理论,进行了燃烧室内声阻尼模拟试验原理和试验技术研究,建立相应的试验系统,通过试验分析了两种试验方法的适用范围及其在发动机研制中声学模拟的有效性。     

基于主动约束层阻尼控制的大型挠性航天器动力学模型

以大型挠性航天器简化模型——中心刚体和固接板混合系统为对象,同时考虑板表面粘贴的主动约束层阻尼结构,根据拟坐标拉格朗日方程,建立了包含所有高阶小量的完整动力学模型。建模时,采用混合坐标描述中心刚体和主动约束阻尼板的运动,用Golla-Hughes-Mctavish模型描述阻尼材料的复模量。基于该动力学模型可进行空间柔性板振动的主动约束阻尼控制器设计和大型挠性航天器的姿态动力学研究。     

超大口径环形天线包带展开过程动力学仿真

中间柔性包带是环形可展开天线的重要组成部分.中间包带拔销器解锁后,复材包带与环形桁架同步展开.因复材包带柔性较强,它会绕根部固定端进行回弹,因此展开过程存在金属接头和桁架上复材薄壁管件碰撞风险.随着天线口径增大,该风险会持续增大.基于柔性多体动力学理论对超大型口径环形可展开天线包带展开过程进行动力学建模仿真,并在此基础...     

Hypersonic vehicle aerodynamic design using modified sequential approximate optimization

Hypersonic vehicles are receiving increased attention within the aerospace community due to their high cruise speed and long-range capabilities. In this paper, a modified Sequential Approximate Optimization method is proposed for an optimized aerodynamic design of a hypersonic vehicle. As part of this approach, a constrained experimental design method is developed to handle the constraints more efficiently. A radial basis function is used to surrogate time-consuming CFD analysis. An efficient and more robust numerical mesh morphing scheme for the hypersonic vehicle is developed for the generation of high-quality meshes. Within this paper, a novel adaptive infilling strategy is proposed which uses an inaccurate search technique coupled with an elite archive. This allows the location of a more promising sample region and hence improves the surrogate accuracy, thereby further enhancing the optimization efficiency. A hypersonic vehicle aerodynamic design problem is solved using the proposed approach and satisfactory results are obtained at much lower computational costs. The lift-to-drag ratio is increased by 23.8% when compared with the base configuration while also satisfying the volume and lift constraints. The pressure and Mach contours have been compared with those of the base configuration and the results demonstrate the strength of the optimized configuration. The modified sequential approximate optimization for designing an improved hypersonic vehicle is worth referencing in future work.     

小功率随动系统多用试验台

本文介绍的小功率随动系统多用试验台,是一种试验设备,它拆装组合方便,参数易于调节,可以根据不同的需要对各种实用随动系统进行模拟试验。这种试验台既可对学生进行系统工作情况演示,又可为学生开设有关的毕业设计,有利于提高学生的感性认识和动手能力。     

一般线性阻尼系统的预解式以及模态正交性

本文研究一般线性阻尼系统的振动问题。仅假定系统的质量矩阵非奇异,将系统模态的加权正交关系式作了拓广,并利用相互等价的一次本征方程与二次本征方程间的转换关系,简捷地求得了预解式的各种模态展开式。     

用分域型矩量法分析阻尼介质对壳体塑性动力响应的影响

本文给出分域型短量法，并将其应用于壳体塑性动力响应问题。文中以承受均布冲击侧压的固支长圆柱壳为例，应用分域型矩量法分析阻尼介质对其塑性动力响应的影响。     

Lock-in phenomenon of tip clearance flow and its influence on aerodynamic damping under specified vibration on an axial transonic compressor rotor

In this study, the lock-in phenomenon of Tip Clearance Flow(TCF) instabilities and their relationship to blade vibration are investigated numerically on an axial transonic rotor with a large tip clearance. The capabilities of simulating instability flow and lock-in phenomenon are verified on a transonic rotor and a NACA0012 airfoil by comparing with the test data, respectively.The lock-in phenomenon is first numerically confirmed that may occur to TCF instabilities when its frequency is close to...     

Convex optimisation approach to constrained fuel optimal control of spacecraft in close relative motion

This paper describes an interesting and powerful approach to the constrained fuel-optimal control of spacecraft in close relative motion. The proposed approach is well suited for problems under linear dynamic equations, therefore perfectly fitting to the case of spacecraft flying in close relative motion. If the solution of the optimisation is approximated as a polynomial with respect to the time variable, then the problem can be approached with a technique developed in the control engineering community, known as “Sum Of Squares” (SOS), and the constraints can be reduced to bounds on the polynomials. Such a technique allows rewriting polynomial bounding problems in the form of convex optimisation problems, at the cost of a certain amount of conservatism. The principles of the techniques are explained and some application related to spacecraft flying in close relative motion are shown.     

A comparative study on acoustic damping induced by half-wave, quarter-wave, and Helmholtz resonators

The damping characteristics of three-type resonators, a half-wave, a quarter-wave, and a Helmholtz resonator are studied experimentally by adopting linear acoustic test. A quantitative acoustic property of sound absorption coefficient in a model enclosure with the resonators is measured and thereby, the acoustic-damping capacity of a resonator is characterized. For a comparative study on acoustic damping, the damping capacity of a half-wave resonator is compared with that of the other resonators. A half-wave and a quarter-wave resonators have the same damping mechanism, but a quarter-wave resonator has much larger damping capacity than a half-wave resonator with the same diameter of a single resonator. It is found that shorter length of a resonator has the advantage of longer one with respect to the damping capacity. The damping capacity of a Helmholtz resonator increases with cavity volume and does as the orifice length decreases. A Helmholtz resonator has the highest damping capacity of three-type resonators and a half-wave resonator has the lowest. Besides, a Helmholtz resonator requires the smallest number of resonators for optimal damping. The design criterion of each resonator on the optimal damping is provided by the normalized parameter of open-area ratio and the similarity behavior for the optimal damping is observed for various enclosure diameters.