合并会计报表中存货跌价准备的抵销方法

文章不仅首次系统完整地提出了适用于任意条件的存货跌价准备的抵销方法,还首次提出并验证了存货跌价准备的两种抵销方法即分析抵销法和综合抵销法.     

濮阳市工业发展的战略选择

根据国外和我国工业发展的经验 ,研究新形势下濮阳市工业发展的指导思想和发展模式 ,并详细地分析了其工业经济的发展战略。     

一般硬化材料弹塑性轴对称圆柱壳的工程解法

在小弹塑性变形条件下，首先将应力写成应变的奇次四项式的幂函数形式，使其相当精确地拟合材料的拉伸曲线，然后，应用线弹性轴对称圆柱壳的位移模态和一待定系数构成弹塑性壳的位移场，再应用最小势能原理确定该系数，从而得到封闭解。     

差压式气体流量计示值修正公式问题分析

气体质量流量 =气体标准状态体积流量×气体标准状态密度 (常数 )。因为气体质量流量检测与示值修正可以理解为先将工作状态气体体积流量示值修正到标准状态 ,然后再乘以气体标准状态密度 ,所以 ,它们的示值修正系数是相同的。数十年来 ,在流量检测学术领域中一直规范着质量流量与体积流量互为倒数的示值修正系数 ,该文的目的是希望引起对这一问题的深入探讨。     

光线跟踪Bezier曲面

 本文提出了一种光线跟踪Bezier曲面的求交算法。该算法通过建立曲面树形存贮结构及网格面的包围盒,实现光线曲面片的相交测试;曲面片的交替二叉离散最终实现交点计算,有效的提高了相交测试效率,改善了曲面四叉、二叉离散求交特性。具有结构简单、有效性强、易于实现等特点,是光线跟踪曲面求交的一种算法。     

H5飞机单发上升性能分析

通过理论分析和大量的计算，得出Ｈ５飞机起飞离地后，在一台发动机工作（单发）条件下上升的最小允许速度、保持单发上升所需的坡度和各种飞行条件对单发上升性能的影响。对飞行员正确处置单发状态具有重要的指导意义。     

An inverse strategy to determine constitutive parameters of tubular materials for hydroforming processes

This paper is to determine the flow stress curve of 5049-O aluminium alloy by a tube hydraulic bulging test with fixed end-conditions. During this test, several tubular specimens are bulged under different internal pressures before their bursting, and the corresponding bulging height and wall thickness at the pole are measured. An inverse strategy is developed to determine the constitutive parameters of tubular materials based on experimental data, which combines the finite element method with g...     

Substructure evolution in two phases based constitutive model for hot deformation of TC18 in α + β phase region

The α + β dual phase titanium alloys are key structural materials in aviation and aerospace industries, and the complicated flow behavior of these titanium alloys during hot deformation requires to establish a constitutive model incorporating physical mechanism for optimizing processing parameters and designing forming tools. This work aims to establish a constitutive model incorporating physical mechanism for hot deformation of TC18 in α + β phase region. Firstly, the flow behavior and microstructure evolution for hot deformation of TC18 in α + β phase region are characterized. The TC18 shows significant strain hardening rate and negative strain hardening exponent around and after peak flow stress, respectively. After peak flow stress, Dynamic Recovery (DRV) mechanism dominates the evolution of α and β phases according to the results of substructure evolution. Then, the internal state variables method is applied to establish a constitutive model incorporating physical mechanism for hot deformation of dual phase titanium alloys. The variation of dislocation density during the hot deformation of titanium alloys is modeled by considering the accumulation of dislocation due to the impediment to dislocation movement by substructure obstacles and the annihilation of dislocation due to the dynamic restoration effect. The interaction between dislocations, the subgrain boundaries and the grain/phase boundaries obstruct the dislocation movement in the α phase, and the first two obstructs the dislocation movement in the β phase during the hot deformation of TC18. The dislocation annihilation process in the α and β phases during the hot deformation of TC18 is dominated by DRV. Finally, the substructure evolution in the two phases based constitutive model for hot deformation of TC18 in α + β phase region is presented. This model is well applied to predict the flow stress and quantitively analyze the role of DRV effect in the evolution of α and β phases during the hot deformation of TC18.     

飞机地面空调车自动温度控制系统设计

本文论述了飞机地面空调车自动温度控制系统的研究与开发。介绍了空调车的设计要求、功能及其原理。阐述了空调车动力系统和空调系统、环境参数对空调车温度及其稳定性的影响。该系统包括电源部分、信号检测、单片机及控制电路四部分。该系统是以单片机AT89C55为基础、采用电压/频率转换技术、具有计算机通讯功能的智能控温系统。     

战斗机横向敏捷性评估与影响因素研究

建立了横向敏捷性的三个尺度－－ＴＲＣ９０，ＴＲＴ９０和ＴＡ的仿真计算模型和机动飞行中的操纵输入规律，并对具有现代飞行控制系统的Ｆ－１６飞机的横向敏捷性进行了数字仿真研究。结果表明：横向敏捷性尺度ＴＲＣ９０，ＴＲＴ９０，ＴＡ均是飞行高度、速度和迎角（过载）的函数，并对飞机横向敏捷性有显著的影响，飞机在高空低速下，以大过载机动飞行时，交获得较大的ＴＲＣ９０和ＴＲＴ９０。合理设计飞机飞行控制系统中的控制