辽中南城市群产业状况调查及结构优化研究

产业结构作为以往经济增长的结果和未来经济增长的基础，已经成为经济发展的基本要素。以辽中南城市群作为研究对象，调查其产业结构现状，探讨影响和决定产业之间比例关系的因素。分析产业结构的变动趋势，提出优化该地区产业结构的方案。优化辽中南地区的产业结构，主要从深化产业分工，提升产业功能入手，以期形成既具有强大的综合竞争力，又具备活力，符合产业结构发展趋势，符合辽中南地区要素禀赋的辽中南产业群。     

考虑加工过程的复杂薄壁件加工综合误差补偿方法

在统计分析的理论基础上,首先将数控加工过程视作以参考模型为自变量,以加工结果为因变量的过程函数;然后将整个误差补偿过程分为3个典型的加工状态,分别构造各个状态的过程函数,并以材料去除量系数为桥梁,建立复杂薄壁件加工综合误差补偿数学模型;对数学模型进行泰勒展开,计算复杂薄壁件加工过程中的误差补偿量,重新构造误差补偿几何模型并生成新的加工程序,以减小复杂薄壁件的加工误差,提高加工质量。通过一组叶片加工对比试验,按照名义去除量进行加工的最大加工误差是0.094mm,而按照误差补偿量进行加工的最大加工误差是0.031mm,仅是前者的32.9%,说明了本文方法在提高加工精度方面的有效性。     

基于横向转运策略的可修件三级库存优化模型

备件横向转运补给是提高装备保障效率的有效途径,针对现有研究不适应部队多级维修供应模式的问题,根据VMETRIC和生灭过程理论,建立了三级保障模式下多类可修备件的库存转运模型,运用启发式算法对模型进行求解,通过仿真验证了算法的正确性。研究了多种保障效能评估指标,以装备可用度为约束、备件购置费用最低为目标,采用边际优化算法得到最优库存方案,并与非转运条件下的方案进行比较。在实际案例中,本文构建的转运模型在提高各项保障效能指标的同时使备件购置费用降低了22.35%。     

Residual stress indentation model based on material equivalence

A novel residual stress indentation model for conical indentation loading is proposed to describe the relationship between the residual stress, material constitutive parameters, load, and displacement for materials with a uniaxial constitutive relationship that obeys Hollomon’s power law (H-law). The novel model was established based on the principle that the equivalent material without residual stress corresponds to the original material with residual stress, conical indentation theoretical model based on energy density equivalence, and an assumed power-law relationship between the dimensionless residual stress and relative difference of the yield stresses of the equivalent material and original material. Sixty imaginary H-law materials with ten equibiaxial and ten uniaxial residual stresses were investigated by Finite Element Analysis (FEA). The residual stresses predicted by the novel model from the indentation load–displacement curves simulated for the imaginary materials are in close agreement with those applied by the FEA. Finally, indentation tests for Cr12MoV steel, 45 steel, and 6061-T6511 aluminum alloy were carried out on their specimens without residual stress and their bending specimens with equibiaxial and uniaxial residual stresses. The residual stresses predicted by the novel model according to the indentation load–displacement test curves are in good agreement with those applied by the tests.     

复杂结构件工序模型自动构建技术研究

工序模型动态集成了航天产品及其零部件的设计、工艺、制造等信息，工序模型构建是航天制造领域三维工艺设计的关键内容，可为控制航天器制造工艺状态、提高加工质量提供使能工具。首先，介绍了正向和逆向两类建模方法的技术原理与特点，将主要建模方法分为特征法、工艺信息法两类;其次，深入分析了切削体造型等不同技术方法的原理与特点;最后，总结了该技术的关键问题并展望其发展方向。本文可为今后航天结构件工序模型自动构建技术的研究提供理论指导与支持。     

An innovative constraining ring rolling process for manufacturing conical rings with thin sterna and high ribs

Conical rings with thin sterna and high ribs (CRTSHR) are key bearing-load parts of aerospace equipment, which are required to be manufactured with high performance and efficiency. Traditional ring rolling is the most preferred method for manufacturing high-performance ring parts, but it can hardly achieve the forming of CRTSHR due to the extreme geometry of CRTSHR. To solve this difficulty, an innovative constraining ring rolling process (CRR) is proposed in this paper to manufacture CRTSHR. To evaluate the proposed CRR and reveal its deformation behaviors, a thermomechanical coupled FE model for CRR of CRTSHR is established. Then, the experiment for CRR of CRTSHR is performed on a modified ring rolling machine, which proves that CRR of CRTSHR is feasible and the established FE model is reliable. Based on the reliable FE model, the metal flow mode in deformed CRTSHR is analyzed, and the deformation characteristics such as the stress state, strain distribution and the evolution of power parameters in CRR of CRTSHR are revealed. Finally, the influences of key parameters such as the friction factor between ring and molds, the diameter of idle roll and the feed velocity of idle roll on CRR of CRTSHR are investigated by FE simulation.     

Radially loading rotary extrusion for manufacturing large-size conical cylinders with inner transverse high ribs

The Large-size Conical Cylinders with Inner Transverse High Ribs (LCCWITHR) can reduce the weight of the parts while maintaining high rigidity and strength. Radially Loading Rotary Extrusion (RLRE) forming technology can achieve integral forming of LCCWITHR through the synergy of radial and rotary movements of dies. The flow law of the material during the forming process is the key to forming large-size inner ribs. At present, there is no unified understanding of the metal flow law of RLRE forming technology. An analytical expression was derived to predict the Radial Direction (RD) deformation loads. The FE simulation and process experiment were carried out to investigate the effects of the inclination angle, thickness factor and transition arc radius of the split top dies on the spacing of the metal diversion plane, the metal flow velocity of the rib area and the final radius of the inner rib. The influence of the split top dies loading distance and the bottom die rotation angle of each pass on the inner radius of the inner rib was verified. And the optimal combination of dies shape parameters and loading paths which can make the metal flow orderly was obtained: the inclination angle is 140°, the thickness factor is 3.64, the transition arc radius is 16 mm; the top dies loading distance is 15 mm, the bottom die rotation angle is 45°. The FE simulation results have been found to be in close agreement with physics experiment. The research results reveal the metal flow law of rib growth in the RLRE of LCCWITHR, which lays a theoretical foundation for subsequent thorough research and process optimization.     

Investigation of anode shaping process during co-rotating electrochemical machining of convex structure on inner surface

A novel co-rotating electrochemical machining method is proposed for fabricating convex structures on the inner surface of a revolving part. The electrodes motion and material removal method of co-rotating electrochemical machining are different from traditional electrochemical machining. An equivalent kinematic model is established to analyze the novel electrodes motion,since the anode and cathode rotate in the same direction while the cathode simultaneously feeds along the line of centres. Acc...     

隔热-相变复合热防护构件热防护能力研究

以隔热瓦、氯化锂相变复合材料、硝酸锂定形相变复合材料和季戊四醇定形相变复合材料为原料制备了隔热-相变复合热防护构件及其纯隔热对比样,采用快速升温单侧加热装置测试了其在1 200℃下的长时热防护性能.结果表明,相同加热时间7 650 s,复合热防护构件及纯隔热对比样的背温分别为222.3、644.0℃,复合热防护构件的隔...     

旋转部件转动诱导振动信号检测与分析

阐述了一个典型旋转部件振动时产生诱导振动信号的检测方法。介绍了测试系统，旋转部件振动测点布置和振动信号采集。根据两个样机的实测结果，认为旋转部件的诱导振动信号与旋转部件生产质量、安装精度密切相关，对旋转部件轴承固有特征的理论计算值和实测频谱进行了比较，进而判断轴承是否存在故障，并分析了上、下轴承间振动信号的相关性。