利用模糊数学建立的股票投资策略

利用模糊数学方法 ,结合股票投资的三个主要环节 :股票投资对象的选择 ,股票的投资组合 ,仓位的控制 ,分别给出了模糊数学处理模型 ,从而在理论上形成了一套较完整的股票投资策略 ,并且这套策略可利用MAT LAB进行实现 ,从而使本系统具有易操作 ,易掌握 ,实用性强的特点。     

微重力条件下部分充液贮箱中流体动力学行为的三维计算

简要介绍一个用于常重及微重力环境条件下，计算充液贮箱中非定常流体动力学行为的三维程序，该程序具有多种选择，提供了一个广泛应用的可能。文中亦给出了对充液４０％模型贮箱中非定常流体动力学行为的计算结果，计算是在ＣＲＡＹ－ＸＰ超高速计算机上完成的。     

确定先期固结压力的试验研究

地基土的先期固结压力是判断土体应力历史的一个指标 ,在不同应力历史状况的土体变形分析也是一个重要的计算参数。因此 ,方便、准确地确定先期固结压力就显得尤为重要。在润扬大桥北锚碇科研项目中 ,对先期固结压力问题进行了试验研究 ,并应用MATLAB编制可视化程序求算先期固结压力值     

高等数学标准化测试CAI系统

】阐述了高等数学标准化测试计算机辅助教学软件开发的环境，它是在Ｗｉｎ－ｄｏｗｓ中文环境中，利用ＦｏｘＰｒｏ数据库软件和Ｗｏｒｄ字处理软件编制的。介绍了高等数学标准化测试ＣＡＩ软件的功能及特点，通过ＤＤＥ技术实现高等数学标准化测试试题的输入输出的方法     

Erosion degradation characteristics of a linear electro-hydrostatic actuator under a high-frequency turbulent flow field

The paper proposes a performance degradation analysis model based on dynamic erosion wear for a novel Linear Electro-Hydrostatic Actuator (LEHA). Rather than the traditional statistical methods based on degradation data, the method proposed in this paper firstly analyzes the dominant progressive failure mode of the LEHA based on the working principle and working conditions of the LEHA. The Computational Fluid Dynamics (CFD) method, combining the turbulent theory and the micro erosion principle, is used to establish an erosion model of the rectification mechanism. The erosion rates for different port openings, under a time-varying flow field, are obtained. The piecewise linearization method is applied to update the concentration of contaminated particles within the LEHA, in order to gain insight into the erosion degradation process at various stages of degradation. The main contribution of the proposed model is the application of the dynamic concentration of contamination particles in erosion analysis of Electro-Hydraulic Servo Valves (EHSVs), throttle valves, spool valves, and needle valves. The effects of system parameters and working conditions on component wear are analyzed by simulations. The results of the proposed model match the expected degradation process.     

非高斯杂波协方差矩阵估计新方法

针对雷达目标自适应检测中的复合高斯杂波协方差矩阵估计问题,提出了 一种基于杂波分组的约束迭代估计方法。该方法在迭代过程中有效利用所有辅助数据,并对 最终得到的估计矩阵进行关于迹的约束。在估计的杂波分组大小与实际情况匹配的条件下, 约束迭代估计方法的估计精度与杂波功率水平无关。仿真实验表明,所提出的方法对不同的 杂波分组大小失配情况具有很好的鲁棒性;与已有的两种协方差矩阵估计方法相比,约束迭 代估计方法能极大的提高估计精度,加快迭代过程的收敛速率,且计算量更小。
     

对称交叉激波和湍流边界层相互作用的数值研究

针对两种双尖鳍外形的对称交叉激波与湍流边界层相互作用,采用N-S方程和两种湍流模型进行了计算。研究了网格收敛性、鳍的角度和湍流模型对壁面压强、Stanton数和壁面摩擦力线的影响。弱相互作用的计算结果较好,强相互作用的壁面压强和摩擦力线的计算结果与试验吻合较好,而Stanton数的计算结果较差,峰值高达试验的2.5倍左右。随着鳍的角度的增加,壁面压强和Stanton数的分布从单调分布发展为M型分布,两者的峰值不在相同的位置。湍流模型对壁面压强和壁面摩擦力线影响很小,对Stanton数计算的影响很大,SST模型比BSL模型表现好一些。     

构建与“工学结合”相适应的《高等数学》课程体系

通过深入研究高职数学课程目标,以"够用为度",提出构建与高职"工学结合"人才培养模式相适应的、具有高职特色的新型数学课程体系。采用与"工学单元紧配合"人才培养模式相匹配的模块式结构,通过三个模块———公共数学模块、扩展模块、数学实验,整合教学内容,实现高职教育"针对不同的专业开设不同的数学课程"的教育目标。     

高超声速复杂流动中的限制器效应数值仿真

从理论分析和数值计算两个方面,对计算流体动力学(CFD)计算中常见的几种MUSCL型迎风式限制器耗散特性进行了研究,包括superbee限制器、van Albada限制器和两种minmod限制器。首先从理论上证明minmod限制器可以是耗散性较小的压缩型限制器,前人关于minmod限制器完全是耗散型限制器的认识是不准确的。其次,通过NACA0012翼型绕流计算表明,限制器耗散特性会对数值计算收敛过程产生重要影响,耗散性越小,如superbee限制器,则收敛越困难。第三,通过一个有实验结果的24°压缩拐角高超声速复杂流动数值计算,进一步澄清了前人关于minmod限制器耗散特性的不准确认识,得到了与理论分析相一致的计算结果,即 minmod 限制器可以是耗散性比Albada限制器更小的压缩型限制器。计算结果表明,对于包含强激波的高超声速复杂流动,本文使用的minmod限制器比superbee限制器和van Albada限制器更容易满足稳定性和高精度的计算要求。     

Continuous morphing trailing-edge wing concept based on multi-stable nanomaterial

Morphing technology is one of the most effective methods to improve the flight efficiency of aircraft. Traditional control surfaces based morphing method is mature and widely used on current civil and military aircraft, but insufficiently effective for the entire flight envelope. Recent research on morphing wing still faces the challenge that the skin material for morphing should be both deformable and stiff. In this study, a continuous morphing trailing-edge wing with a new multi-stable nano skin material fabricated using surface mechanical attrition treatment technology was proposed and designed. Computational fluid dynamics simulation was used to study the aerodynamic performance of the continuous morphing trailing-edge wing. Results show that the lift coefficient increases with the increase of deflection angle and so does the lift-drag ratio at a small angle of attack. More importantly, compared with the wing using flaps, the continuous morphing trailing-edge wing can reduce drag during the morphing process and its overall aerodynamic performance is improved at a large angle of attack range. Flow field analysis reveals that the continuous morphing method can delay flow separation in some situations.