高速列车模型尾流测量及数值积分

结合风洞试验首次采用三维尾流数值积分方法对高速列车尾部流场进行了定性与定量的分析，结果表明尾流积分方法用于高速列车三维尾流场分析，深化了对尾流机制的认识。     

对直升机动力学的现状与发展的分析

对以旋翼动力学和飞行动力学为主体的直升机动力学研究进展回顾。主要讨论与飞行力学有关的旋翼气动力模型，旋翼结构动力学、气动弹性力学、飞行动力学模型与控制以及飞行操纵与品质等方面的进展，分析它们的现状，供有关直升机研究人员参考。     

空间光学系统技术发展探讨

文章总览国际典型大科学工程和计划，对空间光学系统技术在过去20年的发展做出了简要的归纳和总结。同时通过跟踪一些领域前沿和技术生长点，指出了一些可能对未来空间光学系统带来重大改变的方向。     

Analysis on capabilities of density-based solvers within OpenFOAM to distinguish aerothermal variables in difusion boundary layer

Open source feld operation and manipulation（OpenFOAM）is one of the most prevalent open source computational fluid dynamics（CFD）software.It is very convenient for researchers to develop their own codes based on the class library toolbox within OpenFOAM.In recent years,several density-based solvers within OpenFOAM for supersonic/hypersonic compressible flow are coming up.Although the capabilities of these solvers to capture shock wave have already been verifed by some researchers,these solvers still need to be validated comprehensively as commercial CFD software.In boundary layer where diffusion is the dominant transportation manner,the convective discrete schemes＇capability to capture aerothermal variables,such as temperature and heat flux,is different from each other due to their own numerical dissipative characteristics and from viewpoint of this capability,these compressible solvers within OpenFOAM can be validated further.In this paper,frstly,the organizational architecture of density-based solvers within OpenFOAM is analyzed.Then,from the viewpoint of the capability to capture aerothermal variables,the numerical results of several typical geometrical felds predicted by these solvers are compared with both the outcome obtained from the commercial software Fastran and the experimental data.During the computing process,the Roe,AUSM＋（Advection Upstream Splitting Method）,and HLLC（Harten-Lax-van Leer-Contact）convective discrete schemes of which the spatial accuracy is 1st and 2nd order are utilized,respectively.The compared results show that the aerothermal variables are in agreement with results generated by Fastran and the experimental data even if the1st order spatial precision is implemented.Overall,the accuracy of these density-based solvers can meet the requirement of engineering and scientifc problems to capture aerothermal variables in diffusion boundary layer.     

非稳定动态过程非定常气动力建模

现有的大迎角非定常气动力建模方法，通常是以一个或多个频率的稳定振动试验数据来预测稳定滞环。然而，飞机快速机动如过失速机动的过程，不可能是持续的稳定振动，而是一个非稳定的动态过程。因此，这个过程中的气动力不会达到稳定滞环，而是始终处于进入滞环的初始非稳定过程中。基于振动理论分析得出，非定常气动力的动态响应过程存在非稳定和稳定两个阶段，传统建模方法着眼于稳定阶段，而飞机的真实机动过程在非稳定阶段。设计了一种适于非线性系统辨识的激励输入，并以最小二乘支持向量机（LS-SVM）方法为例，实现了在大迎角区幅值和频率范围内任意运动的非定常气动力建模。模型训练完成后，用来预测某机翼在不同基准状态下大迎角范围内做俯仰运动时的升力系数、阻力系数和俯仰力矩系数。结果表明，不仅稳定滞环实现了准确预测，进入滞环的初始非稳定过程也得到了准确预测；此外，基准状态对气动力在初始非稳定过程中的特性存在明显影响。进一步的验证还表明，基于稳定滞环数据只能预测到稳定滞环，无法预测进入滞环的非稳定过程。     

TRIP2.0软件的确认：DPWⅡ复杂组合体的数值模拟

 采用“亚跨超声速计算流体力学软件平台”（TRIP2.0）数值模拟了阻力预测小组（AIAA CFD Drag Prediction Workshop Ⅱ,DPWⅡ）翼/身/架/舱复杂组合体运输机构型,数值模拟采用的多块对接网格、测压和测力的试验结果均来自DPWⅡ,对比计算采用了CFL3D的结果。重点针对DLR-F6翼/身/架/舱复杂组合体构型,详细研究了网格密度和湍流模型对总体气动特性和压力分布的影响,计算结果与相应的试验结果取得了较好的一致。采用SA一方程和SST两方程模型均得到了网格收敛结果;不同的湍流模型对压差阻力影响较小,对摩擦阻力影响较大;不同的网格密度和湍流模型对压力分布有一定的影响。     

耦合运动非定常气动模型对飞机飞行特性仿真的影响

 在大振幅偏航滚转单自由度强迫振荡和耦合强迫振荡运动风洞试验的基础上,分别运用准定常气动力建模方法和非定常气动力建模方法,获取飞机的气动力模型;运用两种不同的气动力模型,对飞机的纵向正弦振荡机动飞行进行了仿真。结果表明,准定常模型在小迎角下的仿真结果与非定常模型的结果基本一致;在较大迎角时,准定常模型仿真结果趋于稳定,而非定常模型仿真结果使飞机进入横航向振荡飞行状态,这一现象与F-16XL的试飞结果类似,其主要原因是耦合运动的非定常模型与准定常模型所产生的阻尼特性不一致。这也表明,分析大迎角飞行特性时应考虑耦合运动下的非定常气动特性。     

Improvement of Baldwin-Lomax turbulence model for supersonic complex flows

Entropy represents the dissipation rate of energy. Through direct numerical simulation (DNS) of supersonic compression ramp flow, we find the value of entropy is monotonously decreasing along the wall-normal direction no matter in the attached or the separated region. Based on this feature, a new version of Baldwin-Lomax turbulence model (BL-entropy) is proposed in this paper. The supersonic compression ramp and cavity-ramp flows in which the original Baldwin-Lomax model fails to get convergent solutions are chosen to evaluate the performance of this model. Results from one-equation Spalart-Allmaras model (SA) and two-equation Wilcox k-x model are also included to compare with available experimental and DNS data. It is shown that BLentropy could conquer the essential deficiency of the original version by providing a more physically meaningful length scale in the complex flows. Moreover, this method is simple, computationally efficient and general, making it applicable to other models related with the supersonic boundary layer.     

超长航时太阳能无人机关键技术综述

超长航时太阳能无人机（UAV）以其高效节能、原理上可实现无限巡航的特点受到广泛关注，而其独特的设计指标与任务特性也对各项关键技术提出了较高要求。多设计要素的高度耦合意味着不同于常规飞行器的总体设计方法，低密度、低速度的飞行条件使其具有明显的低雷诺数气动特性，柔性超大展弦比机翼带来了复杂的气动弹性问题，低翼载荷特性与较大的风场扰动增加了控制难度，极端的飞行环境与苛刻的任务指标对能源、动力系统带来了新挑战，飞行性能对能源系统的高度依赖开辟了飞行轨迹优化的研究方向。本文梳理了超长航时太阳能无人机关键技术的研究现状，在此基础上对各项技术中的难点问题进行了阐释，并对超长航时太阳能无人机未来发展趋势进行了展望。     

随机编码感知的高分辨遥感光谱计算成像

传统遥感光谱成像系统的空间分辨率和光谱分辨率是衡量成像品质的重要指标,而它们受制于探测传感器的点阵密度,提高遥感光谱成像传感器的性能代价非常巨大。另一方面,在入射光能量一定的条件下,由于高分辨光谱的窄波段成像与低窄带辐射能量接收之间的矛盾,传统遥感光谱成像方法的空间分辨率和光谱分辨率往往难以兼得。如何利用普通探测器获得...