碳纳米管增强复合材料研究进展

介绍了碳纳米管的结构、性能等特点，综述了碳纳米管在金属基复合材料、聚合物基复合材料和陶瓷基复合材料中的应用研究情况，并对今后碳纳米管复合材料的发展趋势进行了展望。     

复合材料热压罐固化工艺仿真分析

针对复合材料的固化过程,建立了其热传递和固化动力学双向耦合模型。根据现有的固化工艺
规范,对圆筒形制件进行了分析,并给出了内外面板处的温度及固化度变化规律。从计算结果看出由于模具的
导热能力较差,靠近模具一侧的面板温度上升比另一侧慢,但是其温度场分布会更加均匀。     

Interfacial characteristics in CNTs-AgCuTi systems

AgCuTi-based composite fillers reinforced with Carbon Nanotubes（CNTs） were prepared by mechanical ball milling and ultrasonic agitation. The morphological features, chemical components, and melting characteristics of the composite fillers with different content of CNTs addition were investigated using Field Emission Scanning Electron Microscopy（FESEM）, XRay Diffraction（XRD） and a Differential Scanning Calorimeter（DSC）. After being heated at 900 ℃, the microstructure of the composite fillers was ...     

小型无人机复合材料圆管的成型工艺

小型固定翼无人机的尾撑制件为一种大长径比碳纤维复合材料薄壁类层压圆管结构,该制件除要求具有较高的内外质量、满足无人机机体结构使用要求外,其内形尺寸还应保证后续装配尺寸控制要求,因此使用传统的预浸料卷制成型方式较难以满足上述使用要求.为满足上述要求并得到一种成型工艺简便、成型质量良好的产品,利用丙烯酸酯橡胶及金属芯模制备...     

高稳定高可靠多平台兼容RTK 精密定位系统设计与实现

针对RTK精密定位系统存在的稳定性差、可靠性低、系统兼容能力低等问题，提出了高稳定高可靠多平台兼容RTK精密定位系统设计方法。该系统基于冗余式方法设计GNSS定位单元，以提高系统兼容性；基于工作距离设计冗余式修正信息交互方式，并设计了基于ARM+DSP架构的AM5728实时解算RTK修正信息，通过复合型高速通信链路共享信息。以精密标定点为参考测试其定位精度并采用CEP评估其定位精准性，评估结果表明，CEP=0.0071m，说明定位精度高且可靠性好，解决了稳定性差、可靠性低、系统兼容能力低的问题，有效弥补了RTK精密定位系统领域受限的不足。     

运载火箭固体发动机复合材料技术发展现状

介绍了代表目前运载火箭固体发动机材料技术水平的欧洲织女星(Vega) 三级发动机和作为未

来织女星和新一代运载火箭技术验证的Zefiro 40 发动机以及日本Epsilon 固体发动机的技术特点及其复合材

料与工艺研究进展,结合我国运载火箭固体发动机材料的技术现状,提出发展建议。

     

Comparison Structure Forms Between Isogrid and Orthogrid of C/ E CompositeTrellis Wound Structure Based on Calculation of Load Carrying

This paper calculated load carrying of isogrid and orthogrid of carbon epoxy composite trellis wound
structure (C/ E CTWS) using non linear finite element method. Based on the analysis, test cases were designed and
tests of axial compression were carried. Analysis result and test result fit well. In order to be used in the project, this
kind of structure cut out repairing was calculated. The method presented in this paper has been proved and can be used
to solve complicated engineering problems. According to calculations and experimental results combined with applica
tion, a principle of choosing wound structure is obtained and principle could be applied to engineering.
     

A partition of unity level set method with moving knot CS-RBFs for optimizing variable stiffness composites

A partition of unity level set method with moving knot Compactly Supported Radial Basis Functions (CS-RBFs) is proposed for optimizing variable stiffness composite structures. The iso-contours of a level set function are utilized to represent the curved fiber paths, and the tangent vector of the iso-contour defines the orientation of fiber. The level set function of the full design domain is constructed according to the Partition of Unity (POU) method by a set of local level set functions defined on an array of overlapping subdomains, and they are constructed by using the CS-RBFs. The positions of knots are iteratively changed during the optimization to improve the performance of composite structures. Several examples of compliance minimization are presented.     

SiC纤维增强复合材料界面微观结构的Raman光谱研究

使用Ｒａｍａｎ显微技术（Ｒａｍａｎ ｍｉｃｒｏｓｃｏｐｙ）研究了ＳｉＣ纤维增强碳化硅、ＪＧ６玻璃和Ｐｙｅｒｘ玻璃复合材料界面的微观结构。研究表明,复合材料的制备过程使纤维内自由碳颗粒的大小增大,尤其是在界面层两种玻璃复合材料制造过程使原纤维富含ＳｉＯ２的表面层消失,而且发生了界面层碳结构的有序化。     

Bolt insertion damage and mechanical behaviors investigation of CFRP/CFRP interference fit bolted joints

Interference fit has advantages in improving fatigue behaviors of composite bolted joints; however, interference fit bolt insertion tends to cause damages in laminates weakening joint mechanical properties. Therefore, an experimental study was conducted to investigate bolt insertion damages of Carbon Fiber Reinforced Polymer (CFRP)/CFRP interference fit bolted joints. Mechanical behaviors of joints were also evaluated experimentally under both quasi-static loads and cyclic loads. Scanning Electron Microscope (SEM) and high-resolution X-ray micro-CT scan were used to examine micro damages in laminates. Damage and failure behaviors of joints were characterized. The results demonstrated that the hole entrance in upper laminate and the laminate boundary near the hole wall were the most critical regions for damages during bolt insertions. However, the influence of those damages on quasi-static failure loads and fatigue failure modes of joints was minimal. Delamination and matrix cracking occurred first in laminates following fiber and matrix fracture in quasi-static tensile tests. Interference fit could improve the fatigue resistance of the laminate hole; however, the bolt seemed to suffer a more critical local fatigue loading condition. This paper can contribute to composite structure designs, especially in understanding damage and failure behaviors of composite bolted joints.