复合固体推进剂裂尖复合型变形场和约束场分析

用有限元法分析了不同Ⅰ-Ⅱ复合型裂端的变形场和约束场（裂端形状改变能和应力三维度水平Rσ）分布。结果表明：复合型裂端变形为不对称的相反变形,符合钝化-锐化模型。Ⅰ-Ⅱ复合加载时裂纹尖端出现负约束区域（该区Rσ〈0）,当Ⅱ型分量增加,负约束区域增大,最大约束水平Rσmax降低,且绕裂纹尖端顺时针转动。Rσmax出现距裂纹尖端有一定距离处。Ⅰ-Ⅱ复合载荷下偏离原裂纹方向的裂纹在钝化区内某处危险点开始萌生,并与应力三维度最大位置处产生的空穴或孔洞聚合向前扩展。     

双参考镜合像干涉仪的研究

介绍一种新型干涉测量系统，该系统采用并列的两个参考镜，将产生的两组干涉条纹复合在同一视场。当测量系统产生的光程改变时，两组干涉条纹相对关系按一定规律变化，借助光电转换和图像分析技术，可用于长度和微小角度测量。介绍了可行性实验和测取的数据及分析所得出的结论。     

复合材料包装箱的研制与应用

文章对某复合材料包装箱的研制进行了重点介绍。     

结构振动分析中的连接子结构

连接元和连接子结构与模态综合技术相结合,能够解决部件间连接比较薄弱、变形不连续结构系统的振动分析问题,子结构间的耦合变换非常简单,连接子结构的刚度系数可用参数识别的方法获取。计算和试验结果表明,这种结构连接方法能达到足够的精度,计算量也较小。     

Reliability design optimization of composite structures based on PSO together with FEA

The present work aims to develop a method for reliability-based optimum design of composite structures. A procedure combining particle swarm optimization (PSO) and finite element analysis (FEA) has been proposed. Numerical examples for the reliability design optimization (RDO) of a laminate and a composite cylindrical shell are worked out to demonstrate the effectiveness of the method. Then a design for composite pressure vessels is studied. The advantages and necessity of RDO over the conventional equi-strength design are addressed. Examples show that the proposed method has good stability and is efficient in dealing with the probabilistic optimal design of composite structures. It may serve as an effective tool to optimize other complicated structures with uncertainties.     

Composite control method for stabilizing spacecraft attitude in terms of Rodrigues parameters

In this paper, the attitude stabilization problem of a rigid spacecraft described by Rodrigues parameters is investigated via a composite control strategy, which combines a feedback control law designed by a finite time control technique with a feedforward compensator based on a linear disturbance observer (DOB) method. By choosing a suitable coordinate transformation, the spacecraft dynamics can be divided into three second-order subsystems. Each subsystem includes a certain part and an uncertain part. By using the finite time control technique, a continuous finite time controller is designed for the certain part. The uncertain part is considered to be a lumped disturbance, which is estimated by a DOB, and a corresponding feedforward design is then implemented to compensate the disturbance. Simulation results are employed to confirm the effectiveness of the proposed approach.     

柔性航天器高精度隔振与定向研究

随着大型航天器柔性越来越大,结构越加复杂,导致低频柔性模态密集,但同时需要极高的定向精度及姿态稳定度, 这就对航天器姿态控制系统提出了更高的要求。本文采用拉格朗日法建立了柔性航天器姿态轨道耦合动力学模型,并设计了大角度机动航天器的姿态控制器。Lyapunov定理给出闭环系统的稳定性,在0.03Nm均方根的白噪声扰动下,大角度机动姿态角误差小于0.02°,均方根误差0.003°, 为了抑制姿态抖振,设计了复合控制器,采用Stewart平台对敏感载荷局部高精度主动隔振和定向,局部控制后敏感载荷的定向误差小于0.0001°,均方根误差0.000036°。鲁棒 Η ∞ 控制器对Stewart平台主动镇定时,姿态抖振小于0.000002°,均方根误差小于 0.0000008° ,姿态稳定度优于0.00001°/s。     

等参化FVDAM在复合材料湿热应力分析中的应用

在等参化有限元体积直接平均法（FVDAM）中引入等效湿胀系数,建立了复合材料湿热耦合的细观应力场分析模型。计算了湿热环境中不同纤维体积含量和湿含量复合材料的细观应力场。结果表明：湿热环境中复合材料界面径向应力最大值发生于纤维密集区的相邻纤维间的界面处,最小值出现在基体富区;初始吸湿对热残余应力有释放作用,最终吸湿的影响将超过热残余应力,界面应力状态也随之改变。计算所得细观应力场与有限元（FEM）法有较好的一致性。     

关于某型飞机客舱舷窗组件设计的分析与研究

复合材料有着良好的可设计性和减重性能,客舱舷窗组件也在积极探索应用复合材料的可能。详细分析和探讨了某型飞机客舱舷窗组件的设计。     

航天用复合材料结构高温极限承载能力试验方法

针对航天飞行器飞行特点,本文给出两种基于破坏时间的承载能力试验方法,可以获得结构在不同飞行温度和时间下的承载能力。能够充分发挥材料在传热过程中的高温承载能力,降低结构防热质量。