基于Web的复杂武器装备采办综合集成研讨厅的研究

以飞机采办项目中的决策支持为研究对象,在分析综合集成研讨厅在面向飞机的武器装备采办系统中的重要地位的基础上,提出了一种基于Web、面向飞机的武器装备采办综合集成研讨厅的体系结构,分析讨论了实现综合集成研讨厅的关键点,并设计开发了基于Web的武器装备采办综合集成研讨厅原型系统.本文通过研究证实,综合集成研讨厅在面向飞机的...     

光纤光栅温度传感器研究进展

归纳了以光纤光栅为基础的温度传感器的研究现状,总结了这些温度传感器的基本原理,再现了它们的主要结构,展示了原文提到的实验过程和数据分析结果,并对这些传感器的优点和不足进行了分析,提出了部分改进方案。通过研究发现：光纤光栅温度传感器具有优良的特性,能够在恶劣环境下测量极高的温度,具有广阔的应用前景。     

基于双量程推力传感器的精确测力技术

针对双量程推力传感器在使用中测试精度低的问题,结合传感器固有特性,开展了传感器动态特性分析及误差补偿方法的研究。通过有限元分析和力锤冲击试验,结合结构分析获得了双量程力传感器等效二自由度和三自由度动力学模型。利用近似求积数值法对冲击力试验输出信号进行补偿,获得了接近标准信号的测试结果,对该补偿方法进行了有效性验证。结果显示:本方法对发动机试验的推力信号进行了补偿,推动了单室双推力发动机推力的精确测量,为双推力发动机的推力测试提供了有效途径。     

垂直度误差对复合材料单钉连接性能的影响

为揭示连接孔垂直度误差对航空复合材料连接性能的影响规律,对准各向同性碳纤维环氧树脂复合材料板进行了单钉单剪试验研究。以极限承载强度、弦刚度、2%偏移承载强度为指标研究连接孔的倾斜角度、倾斜方向以及螺栓扭矩对接头承载性能的影响规律。试验结果表明:当连接孔倾斜角度从0°增加到4°时,接头弦刚度增大10%~40%,极限承载强度下降9%~12%;连接孔倾斜方向对极限承载强度影响甚微,却可使接头弦刚度产生20%~30%的变化;增加螺栓扭矩可以有效提高极限承载强度,但对接头刚度无明显影响;连接孔倾斜角度越大,则螺栓扭矩的增大对2%偏移承载强度的强化效果越不明显。     

可压缩流体恒温热线风速仪校准方法

开展了恒温(CT)热线风速仪校准方法的研究,以满足可压缩流体中湍流度测量需求。将对数函数与多元回归技术相结合,建立了恒温热线风速仪校准的数学模型,并进行了风洞湍流度测量试验验证。在马赫数Ma=0.3~0.55范围内进行了校准试验,根据建立的数学模型对试验数据进行拟合,拟合优度R2=0.999 82,平均绝对速度偏差Δu=0.18m/s,基本满足了恒温热线风速仪校准精度要求。对马赫数Ma=0.55条件下流场进行了湍流度测量,速度测量偏差为0.034%,流场湍流度Tu=0.14%。试验结果证明了恒温热线风速仪应用于可压缩流体速度测量的可行性。     

权值动态分配的加权平均法在姿态解算中的应用

鉴于各种姿态算法解算后的精度不高,提出将加权平均法应用于捷联惯导系统的姿态解算中.针对实际应用中无法准确获得姿态角度的真实值这一情况,提出对解算误差进行实时估计的方法,再基于最优权值分配的原则进行权值动态分配.对几种姿态解算算法进行了有效的融合,并应用到姿态解算模块的实际测量中.测量结果分析表明此种方法很大程度上减少了单一算法的解算误差及测量的误差,提高了测量的精度.     

Experimental study of hydrogen-rich/oxygen-rich gas-gas injectors

Five types of coaxial injectors were investigated experimentally using hot hydrogen-rich gas and oxygen-rich gas, which were respectively provided by a GH2/GO2 hydrogen-rich perburner and a GH2/GO2 oxygen-rich preburner. The injectors were the shear coaxial injector, the oxidizer post expansion coaxial injector, the fuel impinging coaxial injector, the central body coaxial injector, and the shear tri-coaxial injector. The characteristic velocity efficiency and the combustor＇s wall temperatures were obtained for different design parameters through the experiments. It can be con- cluded that angles of the oxidizer post expansion and the fuel impinging have little influence on the combustion performance and the wall temperatures. The contact area between fuel and oxidizer and the mass flow rate have significant impacts on the combustion performance. The shear tri-coaxial injector has the best combustion performance but also the highest wall temperatures among the five types of injectors.     

圆筒形拉伸冲压零件下料公式的修正方法

在冲压拉伸制造薄板形零件的模具设计制造中,通常都是先利用公式计算出落料尺寸,根据这个尺寸制造出落料凸模和落料凹模,试生产后再根据制件的误差对落料凸模和落料凹模进行修改,如果成本高,效率低,就通过探讨误差生成的原因以及做出应对的修正方法,从缩小误差,提高试生产效率方面考虑,设法缩短试制时间。     

Tolerance of wheat and lettuce plants grown on human mineralized waste to high temperature stress

The main objective of a life support system for space missions is to supply a crew with food, water and oxygen, and to eliminate their wastes. The ultimate goal is to achieve the highest degree of closure of the system using controlled processes offering a high level of reliability and flexibility. Enhancement of closure of a biological life support system (BLSS) that includes plants relies on increased regeneration of plant waste, and utilization of solid and liquid human wastes. Clearly, the robustness of a BLSS subjected to stress will be substantially determined by the robustness of the plant components of the phototrophic unit. The aim of the present work was to estimate the heat resistance of two plants (wheat and lettuce) grown on human wastes. Human exometabolites mineralized by hydrogen peroxide in an electromagnetic field were used to make a nutrient solution for the plants. We looked for a possible increase in the heat tolerance of the wheat plants using changes in photosynthetically active radiation (PAR) intensity during heat stress. At age 15 days, plants were subjected to a rise in air temperature (from 23 ± 1 °C to 44 ± 1 °С) under different PAR intensities for 4 h. The status of the photosynthetic apparatus of the plants was assessed by external СО₂ gas exchange and fluorescence measurements. The increased irradiance of the plants during the high temperature period demonstrated its protective action for both the photosynthetic apparatus of the leaves and subsequent plant growth and development. The productivity of the plants subjected to temperature changes at 250 W m⁻² of PAR did not differ from that of controls, whereas the productivity of the plants subjected to the same heat stress but in darkness was halved.     

白炽灯色温测量装置电路设计

介绍利用单片单板机接口电路完成对６Ｖ、３０Ｗ白炽灯光源与其对应的标准白炽灯光源的色温比对标定工作。