电容均压三相四开关变换器预测功率控制

三相四开关变换器直流侧分离电容电压不平衡,将降低其并网电能质量,缩短电解电容寿命。针对该问题,提出了一种直流侧分离电容电压均衡的模型预测功率控制策略。基于αβ两相静止坐标系分析电压矢量,建立功率预测模型。由于直流侧电容中点电压偏差值含有交流分量和直流分量,使用低通滤波器提取直流分量后计算功率补偿值,并计入给定功率,进行模型预测功率控制,实现直流侧分离电容电压均衡。该控制策略无需锁相环和PWM调制,易于实现。通过仿真和试验对其动、静态特性进行分析,验证了所提出控制策略的有效性和可行性。     

表贴式永磁同步电机直接转矩控制变角度预测控制

基于以电压矢量相角为变量的表贴式永磁同步电机(SPMSM)磁链和转矩方程,采用预测控制计算得出施加不同电压矢量相角的下一时刻磁链和转矩值,选择使磁链和转矩误差目标函数最小的电压矢量相角作为最优值,从而确定下一时刻施加的电压矢量。仿真结果表明:在电压矢量变角度预测下,SPMSM直接转矩控制系统运行良好,定子磁链轨迹为理想圆,磁链和转矩均符合控制要求,转速跟踪良好,定子电流波形为正弦。研究了不同等分电压矢量相角选择区域方式下变角度预测控制系统的控制效果。综合考虑控制效果和计算负担,变角度预测控制下将相角选择区域四等分比较理想。     

闪沸工况下过热度对水喷雾雾化效果的影响

针对空间及高空环境中航天器、空天飞行器热载荷不断提升而热耗散能力低下的严峻问题,研究水喷雾在低压闪沸工况（又称过热状态）下的雾化效果,雾化效果会直接影响到喷雾的冷却效果。首先,建立了单个液滴在低压环境下由于气泡生长、气动力造成的二次雾化（液滴破裂）模型以及沸腾传质传热模型。其次,通过拉格朗日法综合喷雾中所有液滴,利用MATLAB仿真计算不同过热度对喷雾雾化及液滴温度的影响。进而分析过热度对喷雾冷却效果的影响。计算结果表明,闪沸工况下雾化效果远优于过冷状态;液滴在闪沸工况下温度总会快速趋近饱和温度;过热度越高液滴的雾化效果越好,理论上能够带来更好的冷却效果。     

带空间协同的多导弹时间协同制导律

针对多导弹在平面内从期望的弹目视线（LOS）相对方向同时击中固定目标问题,提出了一种带空间协同的多导弹时间协同制导律。基于平面内的导弹-目标相对运动方程,建立了带空间协同的多导弹时间协同制导模型;基于多智能体协同控制理论,在视线方向设计了分布式时间协同制导律,可保证所有导弹的打击时刻在有限时间内达到一致,在视线法向方向设计了分布式空间协同制导律,可保证所有导弹的相对视线角在有限时间内收敛到期望值;最后,通过仿真验证了所设计的协同制导律可使多导弹从期望的弹目视线相对方向同时击中目标。     

加力燃烧室热声振荡纵向传播特性及控制

建立了管道声传播与不稳定热释放耦合的热声振荡理论模型,并用来对复杂的航空发动机加力燃烧室中的纵向传播的振荡特征频率及稳定性进行分析和预测.利用二维定常计算流体动力学(CFD)模拟结果获得流动平均参数,在此基础上讨论了加力燃烧室内热释放位置、隔热屏穿孔率等结构的变化对热声振荡特性的影响,表明该模型能够方便地应用于对加力燃烧室热声振荡影响因素的研究并揭示某些控制规律.      

基于滑模的多无人机系统协同编队控制

针对具有非完整约束的多无人机系统编队控制问题,提出了一种基于滑模的协同编队控制算法。控制目标是使多无人机系统能够收敛到期望编队,并且能够跟踪上期望的运动轨迹。在领导-跟随结构中,编队的期望运动轨迹由一个动态的虚拟领导者来表示,仅部分跟随者先验已知虚拟领导者信息,并且所有跟随者之间只能局部交互信息。首先,采用分布式状态观测器,使所有跟随者能够在有限时间内估计出虚拟领导者的状态。然后,利用该观测器的估计状态,提出了基于滑模的协同编队控制算法。最后,基于李雅普诺夫稳定性理论证明了多无人机系统的稳定性,并且通过5架无人机的仿真验证了所提算法的有效性。     

A novel low pressure-difference fluctuation electro-hydraulic large flowrate control valve for fuel flowrate control of aeroengine afterburner system

To address the control accuracy of large fuel flowrate during pressure fluctuation, a novel electro-hydraulic fuel metering unit(FMU) is constructed for afterburner fuel system of military aeroengine. Different from the previous FMU, the proposed FMU can achieve the higher precision opening control by a new metering valve with double control chambers(MVDCC), and realize the lower pressure difference fluctuation regulating by a novel two-stage constant pressure difference compensated valve(CPDCV)...     

Convex optimization of asteroid landing trajectories driven by solar radiation pressure

High-area/mass ratio landers driven by Solar Radiation Pressure(SRP) have potential applications for future asteroid landing missions. This paper develops a new convex optimization-based method for planning trajectories driven by SRP. A Minimum Landing Error(MLE) control problem is formulated to enable planning SRP-controlled trajectories with different flight times. It is transformed into Second Order Cone Programming(SOCP) successfully by a series of different convexification technologies. A t...     

Conceptual design and flight test of two wingtip-docked multi-body aircraft

To overcome the drawbacks such as large wing deformations, poor performance encountering gusts, limits in taking off and landing, inconvenience of transportation of High-Altitude Long-Endurance (HALE) Unmanned Aerial Vehicles (UAVs), a new conceptual aircraft called wingtip-docked Multi-Body Aircraft (MBA) has attracted lots of attentions. Aiming to investigate the feasibility of this concept, two UAV models were designed, manufactured and connected by a wingtip-docking mechanism, which only allows the relative roll motion between the two aircraft. The trim solution of the two connected aircraft is firstly obtained by solving the developed nonlinear flight dynamic equations, followed by the stability analysis based on the linearized model. The results show that the connected aircraft is inherently unstable and cannot fly without a reasonable flight control system. A set of Proportional-Integral-Derivative (PID) control laws was then developed and implemented in the two experimental aircraft. The success of the flight tests show that the flight control can effectively eliminate the unstable motion and the wingtip-docked MBA is controllable and feasible.     

对旋轴流风机降噪措施的实验研究

针对一台自行设计的高效对旋轴流风机噪声高的缺点, 分析了主要噪声源及噪声的频率特征;并用消声声衬及适当增加管道长度的方法进行了大量的实验研究, 取得了良好的效果。总声压级由101dB(A)降至88dB(A)。