固体发动机推力随机调节的涡流阀方案研究

介绍了一种固体发动机推力大小随机调节实现的方案－涡流阀方案，导出了涡流阀调节性能的相似准则方程；对涡流阀调节固体发动机静态特性和影响调节性能的各种主要因素进行了分析，指出了提出调节性能的途径，诸了模型发动机的推力调节。     

对旋轴流风机降噪措施的实验研究

针对一台自行设计的高效对旋轴流风机噪声高的缺点, 分析了主要噪声源及噪声的频率特征;并用消声声衬及适当增加管道长度的方法进行了大量的实验研究, 取得了良好的效果。总声压级由101dB(A)降至88dB(A)。      

频率域鲁棒性分析方法及其在飞控中的应用

主要研究了频率域鲁棒稳定性分析的新方法及其在收音机横侧控制系统中的应用。为了提高计算效率，基于Ｎｙｑｕｉｓｔ判据，提出了对数和鲁棒稳定性的新判据，为了简化多变量频率域鲁棒性分析和设计方法，进一步提出了递Ｎｙｑｕｉｓｔ阵对占优势判别式，使计算量大大减少，所提出的鲁棒性新判据在飞机横侧向控制中的应用表明，该方法可以得到讼人满意的结果。     

无人驾驶高空侦察机爬升控制方案分析

介绍了无人驾驶高空侦察机（ＵＡＶ）的爬升轨迹控制方案原理，对纵向控制回路进行了详细分析，按简单拉力法进行了飞行性能计算，同时还分析了爬升方案曲线与优化性能轨迹的关系，并对爬升轨迹计算和试飞遥测数据进行了比较。经分析计算与试飞结果表明，对于爬升较缓慢的飞机，本控制方案可实现沿优化性能轨迹上升，并自动转入有利速度巡航。     

环境条件对铝粉颗粒燃烧产物凝聚的影响

采用金属颗粒蒸汽相扩散燃烧模型和燃烧产物多相成核理论,对铝粉燃烧所形成的Al₂O₃平均粒径进行了计算研究。根据计算结果,就环境因素对铝粉燃烧区域中的温度、燃烧产物的过饱和度及其凝聚成核速率的影响规律进行了分析讨论。结果表明:环境压强增加,铝粉燃烧温度和液滴表面温度提高,铝粉燃烧产物平均粒径降低;环境压强对参数分布特性的影响比环境温度的影响更为显着。      

Reachable set estimation for spacecraft relative motion based on bang-bang principle

For spacecraft formation flight, the information of relative motion reachable set is very important, which can be used to predict the operating boundary of adjacent spacecraft and thus to ensure the safety of spacecraft operation. In this paper, we aim at developing a numerical method to approximate the reachable set for spacecraft relative motion. In particular, we focus on the quality of the approximation and the computational cost. Based on the bang-bang control principle, a polyhedral approximation algorithm is proposed to compute the reachable set of a relative motion spacecraft system. An inner approximation and an outer approximation of the reachable set for the system can be obtained. We prove that the approximation quality measured in Hausdorff distance can be guaranteed. The method is easy to implement and has low computational cost. Finally, the effectiveness of the algorithm is demonstrated by experimental simulation.     

Dynamics,stability, and control of a four-cable mount system for wind tunnel test

A four-cable mount system is proposed for full-model wind tunnel flutter tests, which may adjust the pitch and roll attitude of the aircraft scaled model and ensure that the model is not subjected to cable tension. The system provides sufficient support to simulate the free flight of the aircraft by applying appropriate spring stiffness and cable tensions. The proposed four-cable mount system is modeled based on Lagrange mechanics, and its dynamics equations consider aerodynamic effects. The singularity of the system and its bifurcation characteristics under flow conditions are analysed to determine the supercritical bifurcation phenomenon for different tension levels and distances from the front suspension point to the mass centre of the model. The mathematical expressions of the longitudinal flight stability of the cable mount system are derived by linearising the system dynamics equations using small perturbations. The influence of the cable tension, spring stiffness, suspension point position, and other factors on the flight stability of the aircraft are analysed. A feedforward control algorithm is proposed to minimize the total elastic potential energy of the system. The results show that the model is in the level flight state when the elastic potential energy of the four-cable mount system is minimized. A feedback control design method is proposed based on the Lyapunov stability theory to derive the closed-loop stability conditions. The system dynamics model that includes the aircraft rigid body model, flexible cables, pulleys, springs, aerodynamic model, and servo motor control is established using the flexible multibody dynamics method. A multibody dynamics solver and Simulink are used to simulate the attitude adjustment of the model in the wind tunnel and verify the supercritical bifurcation characteristics of the system and the effectiveness of the feedback and feedforward control.     

翻滚非合作目标逼近与跟踪的轨道和姿态控制

面向近距离逼近与捕获翻滚非合作目标的在轨服务空间清理任务需求,研究了航天器非合作式交会对接的轨道和姿态控制问题。在控制输入受限约束下,考虑存在参数不确定性和外部扰动的情况,结合滑模控制和自适应控制技术,分别进行鲁棒自适应位置和姿态控制器设计。利用自适应控制估计参数不确定性、未知干扰上界以及滑模控制反馈系数矩阵,提高了系统的鲁棒性。通过李雅普诺夫理论证明了系统在控制器作用下全局一致最终有界稳定。仿真结果验证了控制器的有效性,能够有效解决与高速旋转非合作目标的稳定相对位姿关系建立的难题。     

低太阳吸收率αs,高发射率ε有机硅热控涂层进展

本文总结了有机硅热控涂层的设计原理及其紫外真空降解原因,评述了涂层的国内外进展.     

返回式卫星数字姿态控制系统及飞行试验结果

简要介绍我国返回式卫星上用的计算机数字姿态控制系统的方案;重点阐述姿态确定和相平面控制律的设计方法;最后简述飞行试验的结果。