ANALYSIS OF SHEAR STRESS DISTRIBUTION IN HONEYCOMB AIRCRAFT WING STRUCTURE SUBJECTED TO (S.T.) TORQUE

ＡＮＡＬＹＳＩＳＯＦＳＨＥＡＲＳＴＲＥＳＳＤＩＳＴＲＩＢＵＴＩＯＮＩＮＨＯＮＥＹＣＯＭＢＡＩＲＣＲＡＦＴＷＩＮＧＳＴＲＵＣＴＵＲＥＳＵＢＪＥＣＴＥＤＴＯ（Ｓ．Ｔ．）ＴＯＲＱＵＥＫｈａｌｉｄＭ．Ｔａｈｉｒ，ＺｈａｎｇＸｉｎｇ（ＤｅｐａｒｔｍｅｎｔｏｆＦ...     

飞机左右带外挂对称结构振型局部化研究

本文研究了带外挂飞机失调对称结构的振局产化现象，推出了单边联接刚度失调时的振型局部化判据，算例的结果证实了判据的正确性和可用性。此判据可供飞机结构设计选取结构参数时参考之用。     

RF communications subsystem for the Radiation Belt Storm Probes mission

The NASA Radiation Belt Storm Probes (RBSP) mission, currently in Phase B, is a two-spacecraft, Earth-orbiting mission, which will launch in 2012. The spacecraft's S-band radio frequency (RF) telecommunications subsystem has three primary functions: provide spacecraft command capability, provide spacecraft telemetry and science data return, and provide accurate Doppler data for navigation. The primary communications link to the ground is via the Johns Hopkins University Applied Physics Laboratory's (JHU/APL) 18 m dish, with secondary links to the NASA 13 m Ground Network and the Tracking and Data Relay Spacecraft System (TDRSS) in single-access mode. The on-board RF subsystem features the APL-built coherent transceiver and in-house builds of a solid-state power amplifier and conical bifilar helix broad-beam antennas. The coherent transceiver provides coherency digitally, and controls the downlink data rate and encoding within its field-programmable gate array (FPGA). The transceiver also provides a critical command decoder (CCD) function, which is used to protect against box-level upsets in the C&DH subsystem. Because RBSP is a spin-stabilized mission, the antennas must be symmetric about the spin axis. Two broad-beam antennas point along both ends of the spin axis, providing communication coverage from boresight to 70°. An RF splitter excites both antennas; therefore, the mission is designed such that no communications are required close to 90° from the spin axis due to the interferometer effect from the two antennas. To maximize the total downlink volume from the spacecraft, the CCSDS File Delivery Protocol (CFDP) has been baselined for the RBSP mission. During real-time ground contacts with the APL ground station, downlinked files are checked for errors. Handshaking between flight and ground CFDP software results in requests to retransmit only the file fragments lost due to dropouts. This allows minimization of RF link margins, thereby maximizing data rate and thus data volume.     

高速飞行器热结构工作时变模态参数辨识

高速飞行器由于其很高的飞行速度而无可避免地受到气动加热作用的影响,进而引起结构特性的时变。采用理论或有限元方法(FEM)进行数值分析,难以获取反映结构在飞行(工作)状态下的真实模态参数。通过辨识获取高速飞行器热环境下的时变结构模态参数是一项十分具有挑战性的任务。针对此问题,引入参数化时频域的最大似然方法,对气动加热作用下的高速飞行器升力面结构的时变模态参数进行了辨识。通过模拟真实飞行状态的数值算例研究,说明参数化时频域的最大似然方法能够很好地辨识出低信噪比(SNR)情况下的模态频率和模态振型,验证了参数化时频域最大似然方法适用于具有显著时变特征的高速飞行器热结构的时变结构模态参数辨识,可为将来相关的工程研究和应用提供良好的理论支持。     

2. 5D 衍生结构SiO2 f / SiO2 复合材料的经向力学性能

以几种不同的2.5D衍生结构织物为增强体,制备了法向增强、经向增强及经法向增强2.5D Si O2f/Si O2复合材料,比较了上述材料与现有2.5D Si O2f/Si O2复合材料的经向力学性能,并研究了经法向增强2.5D结构复合材料中增强纱比例、纤维体积分数与材料性能之间的关系,对织物结构进行了优化。结果表明,经法向增强2.5D Si O2f/Si O2复合材料的经向力学性能较现有2.5D复合材料有显著提高,该材料在较低密度下(1.6 g/cm3),经向拉伸强度与现有材料(1.65 g/cm3)持平,且经向压缩强度接近现有材料的4.3倍。     

谈若干特殊结构的汉译

翻译是英语教学中的一个重要方面，是英语水平评价的一个重要标准。如何提高翻译水平是一个重要课题。英语中一些由小词开头的特殊结构，如for that matter，if ever，if at all…等，用法特殊，词义不易捉摸，汉语中也难找到相应的结构来表达的。在此文中用等值原则和灵活性原则探讨了这些特殊结构的含义及其用法。     

飞机带外挂对称结构振型局部化的参数影响

本文在文〔１〕研究的基础上，详细分析了飞机左右对称子结构间的耦合度以及外挂联接刚度失调量的大小等因素对振型局部化程度的影响。通过具体的数据揭示了各参数对局部化程序的影响规律。     

Direct position determination using single moving rotating linear array: Noncoherent and coherent processing

To improve the resolution and accuracy of Direct Position Determination (DPD), this paper investigates the problem of positioning multiple emitters directly with a single moving Rotating Linear Array (RLA). Firstly, the geometry of the RLA is formulated and analysed. According to its geometry, the intercepted noncoherent signals in multiple interception intervals are modeled. Correspondingly, the MUltiple SIgnal Classification (MUSIC) based noncoherent DPD approach is proposed. Secondly, the synchronous coherent pulse signals are individually considered and formulated. And the coherent DPD approach which aims for localizing this special type of signal is presented by stacking all array responses at different interception intervals. Besides, we also derive the constrained Cramér-Rao Lower Bound (CRLB) expression for both noncoherent and coherent DPD with RLA under the constraint that the altitudes of the emitters are known. At last, computer simulations are included to examine the performance of the proposed approach. The results demonstrate that the localization accuracy and resolution of DPD with single moving linear array can be significantly improved by the array rotation. In addition, coherent DPD with RLA further improves the resolution and increases the maximum emitter number that can be localized compared with the noncoherent DPD with RLA.     

薄壁微三维结构件超精密研抛技术研究

针对影响薄壁微结构件超精密研抛的工艺因素,即单次进给量、研磨轨迹、研磨膏选择和去除量精确控制,通过大量的研抛加工试验,进行研抛工艺研究,得到能实现稳定和理想加工结果的研抛工艺,很好的满足零件性能要求。     

超燃冲压发动机燃烧室出口温度场分布CARS测量

针对超燃冲压发动机研究中对燃烧室出口温度场的测量需求以及暂冲式超燃冲压发动机燃烧台架试验中的应用难点,开发了适用于瞬态燃烧场温度测量的单脉冲相干反斯托克斯拉曼反射（CARS）系统及CARS光谱计算和温度反演软件CARSCF。采用USED相位匹配方式来降低湍流影响,结合多尺度小波分析方法来实现CARS光谱降噪处理,提高信噪比。在暂冲式脉冲燃烧风洞上开展了来流马赫数2.6条件下超燃冲压发动机燃烧室出口温度测量试验,获取了超声速来流（冷态）建立、H₂点火加热空气、建立超声速燃烧流场直至试验结束过程中的燃烧室出口温度,以及煤油/空气燃烧时燃烧室出口温度场分布。结果显示,超声速冷流时温度处于低温（约205K）状态,随着H₂点火加热来流空气,来流温度上升至853K;随着煤油/Air点火,温度急剧上升,稳定燃烧状态下燃烧流场温度为1970K±144K。燃烧室出口截面温度场分布测量结果显示,高温区位于燃烧室出口截面上侧区域,而燃烧室出口截面上中间区域的温度低于上下两侧。燃烧室出口温度分布CARS测量结果与火焰自发光成像结果一致,表明单脉冲CARS技术用于瞬态燃烧流场温度测量的可行性。