小推力下卫星编队的非自然构型设计与控制

使用小推力控制可以得到许多独特的非自然卫星编队构型,主从星相对位置不变和从星圆形匀速绕飞构型是两类最典型的构型,建立了这两类编队构型的编队参数(主从星距离、空间方位和绕飞速度)与一天内燃料消耗的关系。进一步考虑存在初始误差时控制律的设计,指出PD控制律能够维持小初始误差编队构型,改进的PD控制律能够维持中等初始误差编队构型,而PD控制律和直接法相结合的混合控制律能够维持大初始误差编队构型,仿真结果验证了所设计控制律的有效性。     

工艺方法对某结构形式的强度影响研究

以某结构形式为例,研究了加工工艺对其强度、尤其是疲劳强度的影响,讨论了产生裂纹的原因,提出了工艺改进措施并得到了试验验证。结果表明,结构根部的应力集中是疲劳强度降低并出现裂纹的原因,加工工艺对疲劳强度有较大影响,改进工艺后,该结构根部应力集中程度降低,抗疲劳性能明显改善。     

电信电缆交接箱管理网MNTCSB的实现

电信电缆交接箱管理网MNTCSB利用先进的计算机网络和通信技术实现了对交接箱的自动化管理.叙述了MNTCSB系统的硬件构成、各部分通信方式的解决、地址编码和地址解析、关键算法、各网管功能的实现等.      

Laser-induced oxidation assisted micro milling of high aspect ratio microgroove on WC-Co cemented carbide

Severe tool wear and poor surface quality are the main problems during micro machining of cemented carbide. In this work, an innovative hybrid process of laser-induced oxidation assisted micro milling (LOMM) was proposed to solve the problems. A nanosecond laser was utilized to induce oxidation of the WC-20%Co material, producing loose oxide which was easy to remove. The micro machinability of the material was improved by laser-induced oxidation. The oxidation mechanisms of cemented carbide were studied. A microgroove with a depth of 2.5 mm and aspect ratio of 5 was fabricated successfully. The milling force, surface quality and tool wear mechanisms were investigated. For comparison, a microgroove was also fabricated with conventional micro milling (COMM) using identical milling parameters. Results revealed that in LOMM the milling force and tool wear rate were extremely low during removing the oxide. The machined surface quality and dimensional accuracy achieved by LOMM were superior to those obtained by COMM. The surface roughness S_a of the microgroove bottom reached 88 nm in LOMM, while the cross-sectional geometry of the microgroove was a trapezoid. Perpendicularity of the microgroove sidewall machined by LOMM was better than that by COMM. The tool wear forms in LOMM were coating spalling and slight tool nose breakage. Compared with COMM, the tool life in LOMM was prolonged significantly. It indicates that the proposed hybrid process is an effective and efficient way to fabricate high aspect ratio micro-features with high dimensional accuracy.     

难加工材料纵扭超声振动辅助铣削加工研究进展

纵扭复合超声振动辅助铣削（LTUVAM）是在刀具轴向与扭转方向上施加高频微幅振动的一种辅助铣削技术,具有降低切削力与切削热、提高工件表面质量、提高表面残余压应力、减少刀具磨损等诸多优点。本文围绕难加工材料的铣削加工进行了系统综述。在设备制造方面,阐述了纵扭复合超声振动系统的结构设计方法与工作原理;在工艺开发方面,从LTUVAM的切削刃运动轨迹及切削特性入手,分析各类材料的切削加工性能,并总结了LTUVAM的优势及应用。最后,本文对LTUVAM的未来发展趋势进行展望。     

Four-axis trochoidal toolpath planning for rough milling of aero-engine blisks

The Blade Integrated Disk (Blisk) is one of the key components in the aero-engine, it is generally manufactured by the multi-axis milling and almost 90% raw materials are removed. To avoid the full immersion of a cutter in the rough machining of a blisk channel, the trochoidal milling is a promising strategy since it can keep a small immersion angle in the rough milling process while maintaining the high machining efficiency. However, while toolpaths are being planned for the trochoidal milling process, the conventional methods are mainly for the planar machining area with fixed tool orientations, which cannot be used for complex channels where the multi-axis machining should be employed. To this end, this paper presents a four-axis trochoidal toolpath planning method with a ball-end cutter, and thus the blisk channel can be machined efficiently. For this to happen, the trochoidal paths are planned in the parametric domain and then mapped into the physical domain, with tool orientations controlled by the quaternion interpolation method to have smooth tool movement along the toolpaths. Both geometric simulation and physical milling experiments of the proposed method have convincingly demonstrated the validation of the proposed method.     

In-process adaptive milling for large-scale assembly interfaces of a vertical tail driven by real-time vibration data

Assembly interfaces, the joint surfaces between the vertical tail and rear fuselage of a large aircraft, are thin-wall components. Their machining quality are seriously restricted by the machining vibration. To address this problem, an in-process adaptive milling method is proposed for the large-scale assembly interface driven by real-time machining vibration data. Within this context, the milling operation is first divided into several process steps, and the machining vibration data in each pro...     

Cutting tool temperature prediction method using analytical model for end milling

Dramatic tool temperature variation in end milling can cause excessive tool wear and shorten its life, especially in machining of difficult-to-machine materials. In this study, a new analyt-ical model-based method for the prediction of cutting tool temperature in end milling is presented. The cutting cycle is divided into temperature increase and decrease phases. For the temperature increase phase, a temperature prediction model considering real friction state between the chip and tool is proposed, and the heat flux and tool-chip contact length are then obtained through finite element simulation. In the temperature decrease phase, a temperature decrease model based on the one-dimension plate heat convection is proposed. A single wire thermocouple is employed to mea-sure the tool temperature in the conducted milling experiments. Both of the theoretical and experi-mental results are obtained with cutting conditions of the cutting speed ranging from 60 m/min to 100 m/min, feed per tooth from 0.12 mm/z to 0.20 mm/z, and the radial and axial depth of cut respec-tively being 4 mm and 0.5 mm. The comparison results show high agreement between the physical cutting experiments and the proposed cutting tool temperature prediction method.     

考虑地球扁率效应的两圆轨道之间的双共切最优转移

两圆轨道之间的双共切转移轨道是其近地点和远地点分别在这两个圆轨道上的椭圆轨道。本文用两次冲量法给出了沿双共切椭圆轨道实现从一圆轨道向另一圆轨道转移的最优方案，并考虑到地球扁率造成的轨道摄动。文中的所谓圆轨道指的是变轨时刻的密切轨道为圆形的轨道，是对近圆轨道的近似替找。     

X波段波导端头裂缝的互耦分析

用矩量法(MOM)导出求解X波段波导端头裂缝单元间互耦等效磁流的模型。在此基础上给出了等效磁流在激励和未激励单元内部产生的场、反射系数、驻波系数和两单元间耦合系数等的计算公式。分别在共E、H面条件下分析了两X波段波导端头裂缝互耦的影响,并对单元间不同相对距离和工作频率时的互耦影响规律进行了讨论。研究结果表明,该算法简单,计算值与测试结果吻合较好。