基频160MHz离子刻蚀晶体谐振器

叙述了用新的加工工艺－离子刻蚀减薄技术制成的６０～１５０ＭＨｚ超高频基频卫星用晶体谐振器，论述了新的工艺过程及产品技术性能。     

新型液体成型技术在民机副翼结构的应用研究

基于传统VARI工艺开发了一种可以满足航空复合材料构件大规模生产需求的新型低成本液体成型技术。采用了多种工艺措施确保注胶口和出胶口处树脂压力和树脂流动控制,对比试验表明,采用新型液体成型技术所制备的复合材料层合板厚度均匀性能够接近预浸料/热压罐成型的复合材料层合板的水平。采用新型液体成型技术所研制的民机副翼结构件具有良好的外形和内部质量,可以满足航空复合材料结构的应用需求。     

铝合金振动疲劳同步测量技术研究

随着振动试验技术的不断进步,振动疲劳试验拥有了良好的试验基础,能够进行各种环境下的振动疲劳模拟试验,但目前振动疲劳的测量方法还无法满足振动疲劳试验深入研究的需求。提出铝合金振动疲劳同步测量的方法,同时采用红外监测技术、声发射技术、显微测试技术、应变测试技术等对不同加速度下的铝合金振动疲劳试样进行测量,研究各种测量参数随损伤的变化情况。结果表明:铝合金振动疲劳不同阶段应主要考虑不同的测量参数作为判断损伤的依据,声发射信号可以很好检测到铝合金振动疲劳的裂纹萌生和扩展寿命,红外测得的温升值随着加速度增大是非线性的,铝合金振动疲劳寿命依赖于结构振动频率、阻尼等参数。     

单片机测控系统中的抗干扰措施

在单片机测控系统中,抗干扰性能是系统可靠性的重要指标,抗干扰设计是单片机测控系统研制中必须要考虑的重要内容。通过比较探讨抗电源干扰、抗信号通道干扰、印刷电路板抗干扰以及软件抗干扰等四种单片机测控系统中的四种干扰类型,结合工业现场给出了几种行之有效的抗干扰措施。     

Optimization Design System for Composite Structures Based on Grid Technology

To solve the topology optimization of complicated multi-objective continuous/discrete design variables in aircmit structure design, a Parallel Pareto Genetic Algorithm （PPGA） is presented based on grid platform in this paper. In the algorithm, the commercial finite element analysis （FEA） software is integrated as the calculating tool for analyzing the objective functions and the filter of Pareto solution set based on weight information is introduced to deal with the relationships among all objectives. Grid technology is utilized in PPGA to realize the distributed computations and the user interface is developed to realize the job submission and job management locally/remotely. Taking the aero-elastic tailoring of a composite wing for optimization as an example, a set of Pareto solutions are obtained for the decision-maker. The numerical results show that the aileron reversal problem can be solved by adding the limited skin weight in this system. The algorithm can be used to solve complicated topology optimization for composite structures in engineering and the computation efficiency can be improved greatly by using the grid platform that aggregates numerous idle resources.     

激光等离子体点源减阻技术中入射能量对气动阻力的影响

数值模拟了来流马赫数为5时的圆球绕流冷流场,以及来流与头部驻点附近注入激光能量而产生的等离子体相互耦合形成的流场的演化过程。计算结果表明:施加局部能量点源能够改变原有的弓形激波结构,使其变为斜激波,从而减小气动阻力;气动阻力随入射激光能量的增大而逐渐减小,当入射激光能量为1.1 J时,气动阻力减小的百分比高达40%。     

电传民机高速保护功能应用分析

高速保护功能作为主动控制技术之一,已在当代电传民机上广泛应用。结合空客电传民机设计实例,首先分析了该功能的必要性和设计目标;其次探讨了该功能的设计考虑,包括高速保护裕度考虑、高速保护方案考虑和故障情况下的考虑;最后阐述了高速保护与其它包线保护功能的关系,包括与滚转角保护的关系、与俯仰角保护的关系和与法向过载保护的关系。     

Time-domain modeling of a cutter exiting a workpiece in the slot milling process

In a milling operation, there must be processes of a cutter entering and exiting the work-piece boundary. The cutter exit is usually in the feed direction and the dynamic response is different from that in the normal cutting process. This paper presents a new time-domain modeling of mechanics and dynamics of the cutter exit process for the slot milling process. The cutter is assumed to exit the workpiece for the first time with one tooth right in the feed direction. The dynamic chip thickness is summed up along the feed direction and compared with the remaining workpiece length in the feed direction to judge whether the cutter is ready to exit the workpiece or not. The developed model is then used for analyzing the cutting force and machining vibration in the cutter exit process. The developed mathematical model is experimentally validated by comparing the simulated forces and vibrations against the measured data collected from real slotting milling tests. The study shows that stable cutting parameters cannot guarantee stable cutting in a cutter exit process and further study can be performed to control the vibration amplitude in this specific process.     

自适应滤波技术的研究

应用常规卡尔曼滤波器(KF)要求知道系统精确的数学模型和系统噪声与量测噪声的统计特性,才能获得理想的滤波效果,否则可能产生发散现象。人们越来越倾向于利用自适应滤波(AKF)技术来解决发散的问题。针对AKF技术的研究现状,本文探讨一种结构简单、实时性较强、工程上比较实用的AKF算法。仿真结果表明,这种算法具有较强的自适应性,为一种实用而有效的滤波方法。     

指纹IC卡及其应用

介绍指纹识别技术和 IC卡技术 ,结合实践经验提出指纹 IC卡的解决方案 ,最后讨论指纹 IC卡作为身份认证的应用。