Deep Impact: Working Properties for the Target Nucleus – Comet 9P/Tempel 1

In 1998, Comet 9P/Tempel 1 was chosen as the target of the Deep Impact mission (A’Hearn, M. F., Belton, M. J. S., and Delamere, A., Space Sci. Rev., 2005) even though very little was known about its physical properties. Efforts were immediately begun to improve this situation by the Deep Impact Science Team leading to the founding of a worldwide observing campaign (Meech et al., Space Sci. Rev., 2005a). This campaign has already produced a great deal of information on the global properties of the comet’s nucleus (summarized in Table I) that is vital to the planning and the assessment of the chances of success at the impact and encounter. Since the mission was begun the successful encounters of the Deep Space 1 spacecraft at Comet 19P/Borrelly and the Stardust spacecraft at Comet 81P/Wild 2 have occurred yielding new information on the state of the nuclei of these two comets. This information, together with earlier results on the nucleus of comet 1P/Halley from the European Space Agency’s Giotto, the Soviet Vega mission, and various ground-based observational and theoretical studies, is used as a basis for conjectures on the morphological, geological, mechanical, and compositional properties of the surface and subsurface that Deep Impact may find at 9P/Tempel 1. We adopt the following working values (circa December 2004) for the nucleus parameters of prime importance to Deep Impact as follows: mean effective radius = 3.25± 0.2 km, shape – irregular triaxial ellipsoid with a/b = 3.2± 0.4 and overall dimensions of ∼14.4 × 4.4 × 4.4 km, principal axis rotation with period = 41.85± 0.1 hr, pole directions (RA, Dec, J2000) = 46± 10, 73± 10 deg (Pole 1) or 287± 14, 16.5± 10 deg (Pole 2) (the two poles are photometrically, but not geometrically, equivalent), Kron-Cousins (V-R) color = 0.56± 0.02, V-band geometric albedo = 0.04± 0.01, R-band geometric albedo = 0.05± 0.01, R-band H(1,1,0) = 14.441± 0.067, and mass ∼7×10¹³ kg assuming a bulk density of 500 kg m⁻³. As these are working values, {i.e.}, based on preliminary analyses, it is expected that adjustments to their values may be made before encounter as improved estimates become available through further analysis of the large database being made available by the Deep Impact observing campaign. Given the parameters listed above the impact will occur in an environment where the local gravity is estimated at 0.027–0.04 cm s⁻² and the escape velocity between 1.4 and 2 m s⁻¹. For both of the rotation poles found here, the Deep Impact spacecraft on approach to encounter will find the rotation axis close to the plane of the sky (aspect angles 82.2 and 69.7 deg. for pole 1 and 2, respectively). However, until the rotation period estimate is substantially improved, it will remain uncertain whether the impactor will collide with the broadside or the ends of the nucleus.     

应用逆系统方法设计空空导弹控制器

对非线性控制的逆系统方法原理进行了介绍，将该方法应用于空空导弹制导设计中，设计了导弹质心运动动力学系统的控制器，该控制器通过对弹道坐标系下导弹的纵向过载和法向过载实施控制，可使导弹在控制系统中的速度、偏航角和俯仰角输出信息渐近跟踪制导指令，以实现空空导弹对攻击目标的跟踪。     

芳纶纤维／环氧复合材料界面超声连续改性处理

运用超声技术在芳纶/环氧复合材料制备过程中对其界面进行改性处理,分析了超声处理过程中纤维与树脂之间浸润性的变化趋势以及超声作用对复合材料界面性能和力学性能的影响。结果表明:超声是通过改善纤维与树脂之间的浸润性,提高复合材料的界面性能及力学性能。     

基于BP人工神经网络的GPS／SINS组合导航算法

基于扩展Kalman滤波的GPS／SINS组合导航算法，需要对原始的非线性连续系统模型进行线性化和离散化处理，要求系统噪声和测量噪声为零均值的高斯白噪声，且易于出现滤波器发散。BP人工神经网络毋需对所求解的问题建模，能够很好地逼近系统非线性特性，获得较高精度的导航定位信息；还具有计算过程稳定，不涉及矩阵求逆，不需要迭代逼近，以及容易实现并行处理等优点。本文设计适用于GPS／SINS组合导航系统的BP网络模型，并在标准的BP算法基础上，采用共轭梯度法改进网络训练速度及精度。最后，通过仿真算例说明BP网络方法用于GPS／SINS组合导航计算的可行性。     

不同生命周期项目组合的约束资本预算优化模型及算法

文章给出了约束资本预算优化模型的一般数学表达式.根据詹姆斯*范霍恩的共同生命周期法的理论,提出了一种对不同生命周期项目组合的约束资本预算优化的新算法.通过算例,说明了新算法与原有算法的差别,结果表明新算法考虑了项目的重置,在满足各种约束的前提下,按照净现值指数的大小选择项目组合,从总体上寻优,得到的净现值总和更大,具有更为优化的特征.     

欧拉方程多重网格方法及三维跨声速大迎角流动数值计算

本文给出一种粗、细网格时间步长可调整匹配至最优组合的多重网格方法以获得在最细网格上最大的加速收敛效益，二重网格中节省机时可达３５％。文中的数值方法可用于飞行器跨声速大迎角无粘有旋的涡干扰流场的模拟研究。     

飞机性能优化研究

本文用能量状态近似法和奇异摄动法两件方法讨论了最优飞行剖面的生成.并以某机为例,用能量状态近似法求出了给定航程下的最优飞行剖面和给定初、末状态的爬升飞行剖面;为了对两种方法比较,也给出了奇异摄动法求得的爬升剖面.     

粘流与无粘流的相互作用计算

本文总结了粘流/无粘流的各种计算方法和结果。重点在于介绍定常流动中的弱相互作用。首先叙述了弱相互作用的数学模型。给出了不可压流动和跨音速流动中粘流/无粘流相互作用的某些正耦合的计算结果。讨论了在分离区附近边界层正方法失效的原因。然后介绍了边界层反方法和适用于带分离的流动中半反方法耦合的粘流/无粘流的相互作用方法。文中也简单地总结了三维情况的应用和强相互作用。     

一种电子器件检漏新方法的实现

介绍了电子器件二次筛选中一种新的检漏方法,并与传统的方法进行了比较;对新方法的替代性以及在实际应用中可能遇到的问题进行了讨论。     

应用库理法测量考试信度及意义

在教学管理中，我们广泛而经常地用考试来测定学生对学习内容的完成情况，而学生的考试成绩又作为评价教师和学校教学质量的一个重要指标。本文介绍考试信度的测量方法．以评价考试质量。