气垫支承特性分析

运用气垫支承技术进行重物运输是一种新型的物料搬运方法，它具有摩擦力小，机动灵活的优点，尤其适用于大型，精密装置的搬运，气垫支承技术的关键部件是柔性气垫单元，它在工作中的受力，变形是比较复杂的，本文采用联立求解雷诺方程和弹性元件变形方程的方法，对柔性气垫单元的受力，压力分布，变形及应力进行了计算，计算结果与实测数据基本一致，最后，讨论了结构参数对气垫性能的影响，可以作为气垫单元结构设计的参考。     

Static strength analysis of dragonfly inspired wings for biomimetic micro aerial vehicles

This article examines the suitability of fabricating artificial, dragonfly-like, wing frames from materials that are commonly used in unmanned aircraft(balsa wood, black graphite carbon fiber and red prepreg fiberglass). Wing frames made with Type 321 stainless steel are also examined for comparison. The purpose of these wings is for future use in biomimetic micro aerial vehicles(BMAV). BMAV are a new class of unmanned micro-sized aerial vehicles that mimic flying biological organisms(like flying insects). Insects, such as dragonflies, possess corrugated and complex vein structures that are difficult to mimic. Simplified dragonfly-like wing frames were fabricated from these materials and then a nano-composite film was adhered to them, which mimics the membrane of an actual dragonfly. Finite element analysis simulations were also performed and compared to experimental results. The results showed good agreement(less than 10% difference for all cases).Analysis of these results shows that stainless steel is a poor choice for this wing configuration, primarily because of the aggressive oxidation observed. Steel, as well as balsa wood, also lacks flexibility. In comparison, black graphite carbon fiber and red prepreg fiberglass offer some structural advantages, making them more suitable for consideration in future BMAV applications.     

Charge exchange interactions on near-Earth proton radiation for orbit perturbation of high area-to-mass ratio objects

This novel concept expels neutral gas in the presence of geomagnetically-trapped protons in near-Earth orbit. The expelled neutral gas acts to induce charge exchange collisions with the geomagnetically-trapped protons and induce drag on objects which pass through it. The charge exchange collisions between the neutral gas and the geomagnetically-trapped protons create neutrals with similar kinetic energy that are not confined by the geomagnetic field. The charge exchange neutrals are able to collide with orbital objects and perturb their orbits. The delta-v applied by the charge exchange neutral flux is greatest on high area-to-mass objects. Numerical simulation shows charge exchange neutral impacts produce a delta-v on objects on the order of 3.8 x 10⁻¹¹ m/s at a distance of 1 km from the center of the expelled gas in a 1,000 km orbit. The impulse imparted by charge exchange neutral impacts is at least six orders of magnitude smaller than that provided by the induced drag caused by gas expulsion. The localized drag increase can force a majority of small objects into the orbit of the expelled gas cloud, even if that orbit is retrograde to the initial orbit of the objects. This new technique can be applied to the remediation of space debris.     

质子交换膜燃料电池驱动直流电机转速性能的动态仿真模型

燃料电池具有能量转化效率高、低噪声、低排放、稳定可靠等优点,被认为是继蒸汽机和内燃机之后的第三代动力系统.燃料电池已经成为无人机、轻型飞机的主动力,并用于大型客机的辅助动力装置.本文设计了应用质子交换膜燃料电池直接驱动直流电机和螺旋桨的方案,并利用Matlab/Simulink构建了仿真模型,模拟燃料电池的动态输出特性以及电动机的转速特性.该模型可以为燃料电池飞行器的研发提供参考数据.     

One-up on L1: Can X-rays provide longer advanced warning of solar wind flux enhancements than upstream monitors?

Observations of strong solar wind proton flux correlations with ROSAT X-ray rates along with high spectral resolution Chandra observations of X-rays from the dark Moon show that soft X-ray emission mirrors the behavior of the solar wind. In this paper, based on an analysis of an X-ray event observed by XMM-Newton resulting from charge exchange of high charge state solar wind ions and contemporaneous neutral solar wind data, we argue that X-ray observations may be able to provide reliable advance warning, perhaps by as much as half a day, of dramatic increases in solar wind flux at Earth. Like neutral atom imaging, this provides the capability to monitor the solar wind remotely rather than in situ.     

异质网上互操作—从数据交换到程序交换

对分布式计算和软件集成中的互操作性问题进行了讨论，叙述了遵循特定的标准解决互操作性的办法，比较几种常见的互操作标准，包括ＳＴＥＰ／ＳＤＡＩ，ＣＯＲＢＡ和Ｊａｖａ，描述了Ｊａｖａ语言出现后程序交换的新特点，并对互操作标准的现状作了评述。     

伞形膜结构组合屋盖风荷载特性的风洞试验研究

结合井冈山机场航站楼的风洞试验,分析了伞形膜结构组合屋盖平均风压与脉动风压的分布特性,并从平均风压与脉动风压相关性的分析中讨论了准定常理论的适用性,同时探讨了脉动风压的概率分布,并对峰值因子的取值提出了建议,论文提出对不同紊流区应分别对待的观点,获得了可用于指导一般伞形组合屋盖结构抗风整体设计和局部设计的规律.     

肋片参数对辐射器散热性能的影响研究

采用蒙特卡罗法计算等截面圆管直肋式辐射器的肋片和外管壁相互间的辐射换热,数值模拟了第一类换热边界条件下散热器的散热过程。分析了辐射器的肋片数、肋片高度、肋片厚度及管壁温度对肋片散热性能的影响。结果发现,在肋片质量一定的条件下肋片数及肋片高度均存在一优值,在该值附近肋片的散热效率最高,且该值受管壁温度的影响,温度越高该值越小;在肋片外形不变的条件下,增加肋片的厚度来提高辐射器的散热性能并不是经济的途径;肋片的散热效率随管壁温度的升高而减小,壁温较高时安装肋片的必要性降低。     

Visual Prolog的DDE机制研究

对Visual Prolog的DDE机制进行了研究.首先介绍了动态数据交换技术及其工作原理,简明概括了Visual Prolog的功能、特点以及在专家系统、规划和其它AI相关问题求解方面的优势,其次阐述了Visual Prolog的DDE机制,列出了Visual Prolog中18个DDE谓词和13个DDE事件,分别介绍了作为客户机时,一个典型的请求从其他应用程序输入数据的Visual Prolog程序的关键步骤和作为服务器时,一个典型的响应其他应用程序请求数据的Visual Prolog程序的关键步骤.最后给出了一个Visual Prolog DDE机制应用的实例.     

应用单张像片解析法实现测绘图像实时定位

 针对某大地测绘系统,根据空中探测器实际位置和姿态确定测绘图像的 6个外方位元素,结合摄像机的 3个内方位元素和选中点在图像上的位置,应用单张像片解析法,可以求得图像上任意点的地面坐标,最后经过变换给出该点的经纬度,解决了测绘图像实时定位问题。