Changes in hyperspectral reflectance signatures of lettuce leaves in response to macronutrient deficiencies

The adaptation of specific remote sensing and hyperspectral analysis techniques for the determination of incipient nutrient stress in plants could allow early detection and precision supplementation for remediation, important considerations for minimizing mass of advanced life support systems on space station and long term missions. This experiment was conducted to determine if hyperspectral reflectance could be used to detect nutrient stress in Lactuca sativa L. cv. Black Seeded Simpson. Lettuce seedlings were grown for 90 days in a greenhouse or growth chamber in vermiculite containing modified Hoagland’s nutrient solution with key macronutrient elements removed in order to induce a range of nutrient stresses, including nitrogen, phosphorus, potassium, calcium, and magnesium. Leaf tissue nutrient concentrations were compared with corresponding spectral reflectances taken at the end of 90 days. Spectral reflectances varied with growing location, position on the leaf, and nutrient deficiency treatment. Spectral responses of lettuce leaves under macronutrient deficiency conditions showed an increase in reflectance in the red, near red, and infrared wavelength ranges. The data obtained suggest that spectral reflectance shows the potential as a diagnostic tool in predicting nutrient deficiencies in general. Overlapping of spectral signatures makes the use of wavelengths of narrow bandwidths or individual bands for the discrimination of specific nutrient stresses difficult without further data processing.     

CubeSail: A low cost CubeSat based solar sail demonstration mission

CubeSail is a nano-solar sail mission based on the 3U CubeSat standard, which is currently being designed and built at the Surrey Space Centre, University of Surrey. CubeSail will have a total mass of around 3 kg and will deploy a 5 × 5 m sail in low Earth orbit. The primary aim of the mission is to demonstrate the concept of solar sailing and end-of-life de-orbiting using the sail membrane as a drag-sail. The spacecraft will have a compact 3-axis stabilised attitude control system, which uses three magnetic torquers aligned with the spacecraft principle axis as well as a novel two-dimensional translation stage separating the spacecraft bus from the sail. CubeSail’s deployment mechanism consists of four novel booms and four-quadrant sail membranes. The proposed booms are made from tape-spring blades and will deploy the sail membrane from a 2U CubeSat standard structure. This paper presents a systems level overview of the CubeSat mission, focusing on the mission orbit and de-orbiting, in addition to the deployment, attitude control and the satellite bus.     

强度关联遥感成像技术

过去十多年中,利用光场的量子（或经典）涨落及其关联获取目标图像信息的量子（强度）关联成像技术和基于自适应稀疏结构表象的信号处理技术的不断发展,为图像信息的获取提供了一条可突破传统光学成像技术图像分辨率和图像获取效率理论极限的全新技术途径。文章将概括地介绍这一研究方向,并简要讨论其在遥感领域中的应用前景和需要进一步研究的...     

密集烘烤过程中烤房叶间风速指标的灰色关联聚类分析

在烘烤过程中,密集烤房内部不同位点的风速之间密切又复杂.为确定风速指标间的关系,测定了密集烤房内405个风速值,对15个风速指标进行了灰色关联聚类分析.结果表明：当聚类临界值为0.8时,15个风速指标可被聚为2类;当聚类临界值为0.7时,15个风速指标可被聚为1类.通过分析,密集烤房内部同一平面不同位点的风速差异较小,可视为均匀一致,密集烤房能够保证装烟室同一层烟叶整体上均处于同样的变色和干燥环境下,从而能够在理论上保证其烟叶相同的烘烤质量.     

基于FSK的测斜系统电路设计

本文重点阐述了测斜系统井下仪器数据采集单元和数据发送单元电路的设计及井上仪器解调电路的设计，给出了具体的电路设计结果及元器件参数。     

微型扑翼飞行器升力特性研究

为了对微型扑翼飞行器升力机理进行探索性研究,本文利用西北工业大学微型飞行器专用风洞进行了扑动翼频率、风速、迎角、扑动翼弯度对其升力特性影响的研究.并且利用示波器对扑动翼扑动相位角和产生升力大小之间的关系进行了研究.试验结果表明升力特性的研究为微型扑翼飞行器总体设计和气动布局设计提供了一定的工程指导.     

基于低矮建筑物实测数据的改进湍流物理模型

要准确模拟低矮建筑物壁面上分离涡位置的平均风压比较困难,这些区域在绕钝体流动中也是很关键的部位.本文在Spalart-Allamaras湍流物理模型的基础上,根据钝体绕流流场特性,结合低矮建筑物上的实测数据,调试并选取合适的参数,提高涡粘预测的准确性,提出了改进的S-A湍流物理模型.通过对6m立方体和Silsoe低矮建筑模型进行稳态数值模拟,由改进S-A湍流模型得到的屋面、背风和侧风面上平均风压结果,比目前公认的模拟钝体绕流效果较好的SST湍流模型有较大改善,比风洞实验更接近实测结果.由此可以看出,本文改进湍流模型的方法,将是一条提高预测建筑物表面平均风压精度很有效的途径.     

同应力多危险部位失效相关轮盘疲劳寿命可靠度分析方法

提出了考虑失效相关性的同应力多危险部位轮盘应变疲劳寿命可靠度分析方法.引入广义强度和广义应力建立轮盘应变疲劳寿命可靠性模型,采用H-L法计算轮盘单失效部位可靠度.针对发动机轮盘常存在同应力多危险部位的特点,当考虑多失效部位相关性时,采用HohenbichlerM积分法对轮盘疲劳寿命可靠度进行计算.最后通过某轮盘应变疲劳寿命分析说明该方法的有效性.探讨了轮盘失效功能函数相关系数和应变寿命模型中材料随机变量相关系数关系,以及轮盘失效功能函数相关系数和轮盘疲劳概率寿命规律.      

现代民用客机线路故障的检测方法

随着机队逐渐进入或将要进入老龄化,给维护人员带来形式多样的线路故障,这些故障有短路、断路和间歇性电阻性线路故障、电吝性线路故障（总线线路故障）和电感性线路故障（电磁干扰故障）,论述了如何在日常维护工作时使用三用表、兆欧表、电容表、线路故障测试仪和磁场测试设备排除上述复杂的线路故障,研究了使用目前维修单位现有的工具和测量设备排除这些故障的程序和方法。     

中远程空空导弹弹载数据链战技指标研究

分析了中远程复合制导空空导弹中制导过程中弹载数据链的工作原理,并建立了中制导过程中的导弹运动模型、目标机动模型、导弹中制导导引律模型以及中末交接班模型。采用了不同的更新频率对中制导过程进行了仿真,从而得出弹载数据链允许的最低更新频率。