三维有限元网格的自动划分

本文作者从研究结构的数学模型入手,讨论了建立三维结构有限元计算模型的方法。成功地获得了一些具有应用代表性的三维板壳和块体结构有限元计算网格的自动划分原理和算法。     

面内强磁场下铁磁板壳的自由振动

本文研究了面内强磁场环境下铁磁板壳的自由振动问题。基于Eringen-Maugin的关于磁弹性作用的理性力学模型,从理论上推导了一般壳体在磁场中的运动方程,进而求解了面内强磁场作用下的小磁化率悬臂铁磁薄板自由振动频率。数值计算结果表明,本文模型和已有的实验结果吻合很好。     

基于BP网络的热工过程模型辨识方法

主要研究了人工神经网络在辨识火电厂热工过程模型中的应用，利用Visual C^ 语言构造BP神经网络,提出了把BP网络权值转换为传递函数的方法，针对火电厂常见的热工过程，不用人为加入特殊的激励信号，只利用现场生产中自然存在的扰动信号进行辨识试验，试验结果准确可靠。     

CARDC 2.4m引射式跨声速风洞设计与运行调试

中国空气动力研究与发展中心研制了可更换喷嘴的中压气体引射器 ,利用现有中压气源驱动 ,建成一座增压回流引射式跨声速风洞。试验段截面尺寸 2 .4m×2 .4m ,M =0 .3～ 1 .2。稳定段最高工作压力为 0 .45MPa ,最高模型试验雷诺数Rec=1 5× 1 0 6(M =0 .90 ,C =0 .2 4m) ,稳定吹风时间≥ 1 5s。风洞气动回路上分别配置有多喷管引射器、栅指扩散段、跨声速试验段驻室抽气系统及特殊的主排气系统等装置。采用智能自适应解耦控制技术 ,实现总压和M数独立、快速、精确地控制。该气动布局与部段配置及其功能设计 ,在国内跨声速风洞中均是首次采用。     

GPS定时校频应用技术的基础研究

针对利用GPS进行定时校频技术开展了一系列的应用基础研究,包括GPS定时校频的方法及其不确定度、定时校频数据的处理等。在给出实验结果的同时,对影响GPS定时精度的各种因素(包括SA影响)进行了讨论;同时对提高GPS定时精度的途径作了初步探讨。     

应用分力合成方法提高系统性能指标的研究

提出了将柔性结构的分力合成主动振动抑制方法和反馈控制律结合使用来提高柔性结构控制系统性能指标的方法。应用该方法仅需要知道闭环系统及柔性振动的频率及阻尼，而且可以同时抑制任意多个振动模态（包括控制器引起的振动，柔性振动及其他形式的振动），分力合成方法对频率及阻尼的不确定性具有较强的鲁棒性，使该方法易于工程实现，文章针对单柔性杆，将分力合成主动振动抑制方法和反馈控制相结合，设计了不同形式的大角度机动控制律，数值仿真和试验结果充分验证了方法的有效性。     

A survey of radio jets with Chandra and HST

Relativistic jets are a common property of radio-loud Active Galactic Nuclei (AGN). Understanding jet physical properties is an essential precursor to understanding the mechanisms of energy transport, and ultimately, how energy is extracted from the central black hole. In this paper, I highlight recent developments from Chandra and HST observations of kpc-scale jets in AGN, with particular emphasis on our survey of 17 radio jets in a sample of FRII radio galaxies. These observations show that (1) X-ray and optical emission is common from kpc-scale jets, (2) a large fraction of the bolometric luminosity is emitted at X-rays, and (3) in most sources, a candidate emission process for the X-rays is inverse Compton scattering of the Cosmic Microwave Background off the relativistic electrons in the jet. If the latter scenario holds, the implication is that jets are still relativistic on kpc scales.     

基于参数化模型和遗传算法的复合材料加筋壁板结构选型优化研究

针对复合材料加筋壁板的结构优化选型问题,采用辅助层压板和添加极小弹性模量材料的复合材料加筋壁板有限元建模方法,应用PATRAN/NASTRAN的参数化建模功能和遗传算法相结合的复合材料加筋壁板的优化方法,对5种复合材料结构形式进行了从2000N/mm到6000N/mm压缩载荷下的结构优化分析。结果表明,当载荷小于4500N/mm时,最有效的加筋壁板结构型式为J型;当压缩载荷大于4500N/mm时,最有效的加筋壁板结构型式为I型。     

Modeling novel methodologies for unmanned aerial systems–Applications to the UAS-S4 Ehecatl and the UAS-S45 Bálaam

The rising demand for Unmanned Aerial Systems(UASs) to perform tasks in hostile environments has emphasized the need for their simulation models for the preliminary evaluations of their missions. The efficiency of the UAS model is directly related to its capacity to estimate its flight dynamics with minimum computational resources. The literature describes several techniques to estimate accurate aircraft flight dynamics. Most of them are based on system identification. This paper presents an alternative methodology to obtain complete model of the S4 and S45 unmanned aerial systems. The UAS-S4 and the UAS-S45 models were divided into four sub-models, each corresponding to a specific discipline: aerodynamics, propulsion, mass and inertia, and actuator. The‘‘aerodynamic" sub-model was built using the Fderivatives in-house code, which is an improvement of the classical DATCOM procedure. The ‘‘propulsion" sub-model was obtained by coupling a two-stroke engine model based on the ideal Otto cycle and a Blade Element Theory(BET) analysis of the propeller. The ‘‘mass and the inertia" sub-model was designed utilizing the Raymer and DATCOM methodologies. A sub-model of an actuator using servomotor characteristics was employed to complete the model. The total model was then checked by validation of each submodel with numerical and experimental data. The results indicate that the obtained model was accurate and could be used to design a flight simulator.     

AADL在航天器控制系统设计中的应用研究

以某型号航天器为例提出了一种使用体系结构分析和设计语言(AADL,architecture analysis & design language)分层次建模的方法,建立控制系统软件及软件与硬件之间的交互模型.采用状态自动机方式描述串口通信协议,以便分析模型.