固体火箭发动机用C/SiC导流管烧蚀性能研究

采用地面试车试验考核了固体火箭发动机用C/SiC导流管的烧蚀性能,并对C/SiC导流管的烧蚀机理进行了探讨。结果表明:导流管轴向线烧蚀率变化较大,沿气流方向呈上升趋势。材料的线烧蚀率从进口处的0.018mm/s增至出口处的0.032mm/s,且导流管中间段烧蚀稳定性明显优于进口段和出口段。同时,C/SiC导流管的烧蚀机制主要是粒子冲刷和机械剥蚀共同作用的结果。     

发动机火警传感器校验仪的研制

主要介绍了基于C8051单片机的发动机火警传感器校验仪的研制,讨论了该校验仪硬件电路的设计以及对温度非线性进行曲线拟合的方法.实验结果表明该校验仪能够全自动地检测出火警传感器的动作情况,并且具有较高的温度检测精度和稳定性.     

基于Linux的触摸屏设备驱动的设计

以三星公司的S3C2440A处理器为平台，介绍了linux操作系统下四线电阻触摸屏的驱动程序的设计开发过程，详细阐述了触摸屏设备驱动程序的设计过程，并将设计好的驱动程序注册到linux内核中。最后将触摸屏设备驱动程序加入到linux内核中编译成内核映像，并烧写到S3C2410A处理器中测试该驱动程序。     

多层铜布线CMP工艺的优化研究

集成电路多层铜布线平坦化中,CMP工艺参数的配置是决定抛光表面状态和平坦化程度的重要因素。本文研究了碱性介质下铜CMP机理,深入分析了CMP系统中影响抛光表面状态的诸多工艺因素。在此基础上设计了多层铜布线CMP工艺的优化实验,有效地解决了划伤,蚀坑等表面缺陷问题,实验测定表面粗糙度数据较为理想,获得了良好的实验效果。     

T cell regulation in microgravity – The current knowledge from in vitro experiments conducted in space,parabolic flights and ground-based facilities

Dating back to the Apollo and Skylab missions, it has been reported that astronauts suffered from bacterial and viral infections during space flight or after returning to Earth. Blood analyses revealed strongly reduced capability of human lymphocytes to become active upon mitogenic stimulation. Since then, a large number of in vitro studies on human immune cells have been conducted in space, in parabolic flights, and in ground-based facilities. It became obvious that microgravity affects cell morphology and important cellular functions. Observed changes include cell proliferation, the cytoskeleton, signal transduction and gene expression. This review gives an overview of the current knowledge of T cell regulation under altered gravity conditions obtained by in vitro studies with special emphasis on the cell culture conditions used. We propose that future in vitro experiments should follow rigorous standardized cell culture conditions, which allows better comparison of the results obtained in different flight- and ground-based experiment platforms.     

基于插入式重复控制的摆动扫描控制系统研究

文章分析了重复控制器的基本原理和稳定条件,针对摆动扫描控制系统,在不改变原来控制系统设计的基础上,采用一种插入式重复控制器,极大地提高了摆动扫描系统的位置跟踪精度,提高了摆动扫描的控制性能.     

C—半群和对抽象Cauchy问题的应用

本文研究了Ｃ－半群的无穷小生成元定义中强弱极限的等价性及生成元的有关性质，讨论了Ｃ－半群在齐次与非齐次Ｃａｕｃｈｙ问题中的应用。     

飞机燃油系统地面模拟试验干扰的产生和处理

分析燃油地面模拟试验台测控系统在调试过程中模拟量输出信号出现大幅度波动的原因,介绍其处理过程及实际效果,指出在试验中应采取的措施。     

Theoretical simulation of electron density and temperature distribution at Indian equatorial and low latitude ionosphere

The electron density and temperature distribution of the equatorial and low latitude ionosphere in the Indian sector has been investigated by simultaneously solving the continuity, momentum and energy balance equations of ion and electron flux along geomagnetic field lines from the Northern to the Southern hemisphere. Model algorithm is presented and results are compared with the electron density and electron temperature measured in situ by Indian SROSS C2 satellite at an altitude of ∼500 km within 31°S–34°N and 75 ± 10°E that covers the Indian sector during a period of low solar activity. Equatorial Ionization Anomaly (EIA) observed in electron density, morning and afternoon enhancements, equatorial trough in electron temperature have been simulated by the model within reasonable limits of accuracy besides reproducing other normal diurnal features of density and temperature.     

三维轴编C/C复合材料双向拉伸实验研究

设计了双向拉伸十字型试样,采用不同的加载比例和加载方向对三维轴编C/C复合材料进行双向拉伸实验,面内方向施加1∶1和1∶2的载荷,面外方向施加1∶1的载荷。实验结果表明,十字型试样的初始破坏发生在中心打薄区域,材料为脆性断裂。面内双向拉伸破坏主要为径向纤维束的断裂和基体的开裂,断口大多沿60°方向;面外双向拉伸破坏主要以纤维束的断裂、炭棒的拔出和基体开裂为主,断口形貌较为复杂。材料在不同载荷形式下有着不同的强度值,相对于单向拉伸强度,存在强度弱化现象。根据实验数据确定了蔡-吴强度准则的参数,为三维轴编C/C复合材料结构强度设计及校核提供参考。