Research into Configuration and Flow of Wall Oil Film in Bearing Chamber Based on Droplet Size Distribution

The lubrication design and heat transfer determination of bearing chambers in aeroengine require a sufficient understanding of the oil droplet-film interaction and physical characteristic in an oil/air two-phase flow state.The analyses of oil droplet movement,mass and momentum transfer during the impingement of droplet/wall,as well as wall oil film thickness and flow velocity are very important for the bearing chamber lubrication and heat transfer calculation.An integrated model in combination with droplet movement,droplet/wall impact and film flow analysis is put forward initially based on the consideration of droplet size distribution.The model makes a contribution to provide more practical and feasible technical approach,which is not only for the study of droplet-film interaction and physical behavior in bearing chambers with oil/air two-phase flow phenomena,but also useful for an insight into the essence of physical course through droplet movement and deposition,film formation and flow.The influences of chamber geometries and operating conditions on droplet deposition mass and momentum transfer,and wall film thickness and velocity distribution are discussed.The feasibility of the method by theoretical analysis is also verified by the existing experimental data.The current work is conducive to expose the physical behavior of wall oil film configuration and flow in bearing chamber,and also significant for bearing chamber lubrication and heat transfer study under oil/air two-phase flow conditions.     

冷却剂/氧化剂组合式SteamJet发动机特性

为了系统深入地研究冷却剂/氧化剂组合式射流预冷却涡轮发动机(SteamJet)的发动机特性,建立了射流预冷却的热交换系统计算、物性修正计算、发动机部件特性修正计算和含氧化剂的燃烧室计算的数学模型,在此基础上,建立了基于双轴混排加力式涡扇发动机的SteamJet发动机性能计算模型,并编制了相应的计算程序。初步设计了SteamJet发动机的最大加力状态控制规律,计算分析了SteamJet发动机在不同冷却剂/氧化剂配比下沿飞行轨道的特性,并据此提出了影响冷却剂/氧化剂配比选择的主要因素;对冷却剂/氧化剂组合式SteamJet发动机进行了高度速度特性的计算和分析。结果表明,与喷水预冷却的SteamJet发动机相比,冷却剂/氧化剂组合式SteamJet发动机具有更好的燃烧稳定性和推力特性,能够满足高超声速飞行的需求。     

基于Linux军用TCP/IP协议栈设计与实现

提出一种在嵌入式Linux操作系统上运行TCP/IP协议的解决方案。介绍了Linux内核,在此基础上结合嵌入式系统特点,对TCP/IP协议栈进行简化,提出总协议栈的体设计。根据军用通讯要求着重讨论了网络协议的安全问题,参考现在通用的网络安全模式PGP,对TCP/IP协议栈进行修改,主要是在应用层中加入了加密、认证以及密钥分配过程。加密过程采用DES和RSA组合算法,保证其安全性、可行性以及时效性。     

Control-oriented Modeling for Air-breathing Hypersonic Vehicle Using Parameterized Configuration Approach

This article presents a parameterized configuration modeling approach to develop a 6 degrees of freedom (DOF) rigid-body model for air-breathing hypersonic vehicle (AHV). The modeling process involves the parameterized configuration design, inviscous hypersonic aerodynamic force calculation and scramjet engine modeling. The parameters are designed for airframe-propulsion integration configuration, the aerodynamic force calculation is based on engineering experimental methods, and the engine model is acquired from gas dynamics and quasi-one dimensional combustor calculations. Multivariate fitting is used to obtain analytical equations for aerodynamic force and thrust. Furthermore, the fitting accuracy is evaluated by relative error (RE). Trim results show that the model can be applied to the investigation of control method for AHV during the cruise phase. The modeling process integrates several disciplines such as configuration design, aerodynamic calculation, scramjet modeling and control method. Therefore the modeling method makes it possible to conduct AHV aerodynamics/propulsion/control integration design.     

"回收/调节"方法在混合LES/RANS模拟方法中的应用

采用一种混合大涡模拟/雷诺平均Navier-Stokes(LES/RANS)模拟方法结合三阶加权基本无振荡(WENO)格式对马赫数为2.88的压缩斜坡流动进行了数值模拟,并采用"回收/调节"方法生成入口湍流脉动边界条件.当采用固定入口边界条件时,湍流边界层会缺乏合理的湍流能量,使之抵抗逆压梯度的能力减弱,会严重高估分离...     

某涡扇发动机考虑级间引气的二维数值模拟

针对采用S₂流面流场模拟软件(AES-S2),对某涡扇发动机风扇、压气机(考虑级间引气)和整机进行地面0km及高空21km低雷诺数工况下转速特性的评估和流场分析.AES-S2数值仿真模型由带有黏性项的二维欧拉方程、燃烧模型和损失模型构成;采用任意曲线坐标系,可保证复杂几何边界的计算精度;采用隐式高阶精度Godunov求解格式,数值稳定性高,可自动捕捉激波.仿真结果表明:AES-S2计算稳定性好,收敛速度快;风扇和压气机的计算精度高于整机;整机二维计算满足工程精度需求,可为部件研制和整机部件匹配提供性能参数依据.      

基于Patran/Nastran 和Hypersizer的复合材料后机身加筋结构形式选择分析

针对复合材料后机身加筋壁板构型选择问题,采用有限元前后置处理软件Patran建立有限元模型,使用有限元分析软件Nastran进行初步分析,利用复合材料结构分析与优化软件Hypersizer进行结构形式的优化计算分析,优选出后机身壁板最佳结构形式。通过计算分析,得出有意义的工程经验。     

微量Al 掺杂对2D C/ SiC 性能的影响

以二维编织碳纤维碳布为预制体,采用聚铝碳硅烷(PACS)为聚合物前驱体,应用化学气相渗透(CVI)结合聚合物浸渗-裂解(PIP)工艺制备微量Al掺杂2D C/SiC复合材料。研究微量Al掺杂对C/SiC微观结构、力学、热膨胀和氧-乙炔焰烧蚀性能的影响。结果表明:掺杂微量Al未改变C/SiC的微观结构和热膨胀性能,也未降低其韧性和强度;但微量Al掺杂提高了C/SiC的抗烧蚀性能,含微量Al的SiC氧化形成微量Al熔于SiO2的固熔体,微量Al提高了SiO2的黏度和致密度,减小SiO2挥发,较未掺杂Al的C/SiC相比,线烧蚀率降低了26%。     

基于公务机经济性的升阻特性优化

以提高公务机空气动力效率为目的,讨论了可应用于工程实际的升阻优化技术的优缺点,并展望了其应用前景。     

飞机雷电直接效应综述

飞机的雷电直接效应对飞行安全构成危害,在飞机设计时必须充分考虑这些危害。对比了金属飞机和复合材料在雷电直接效应上的差异,分析了雷电直接效应对各种复合材料的影响,并对燃油系统、电力系统和推进系统等关键部位的雷电危害机理及危害程度进行了全面分析,可为飞机雷电防护设计及试验提供参考。