经营多角化的结合效应与度量

经营多角化多年来一直是产业经济学家和政策制定者关注的焦点之一。本文对如何取得多角化经营的结合效应作了分析,并给出了经营多角化的度量方法。     

民机高速风洞试验的阻力雷诺数效应修正

在飞机设计阶段,获得准确的气动特性数据对设计者是十分重要的,采用缩比模型的风洞试验是主要途径之一。但是风洞条件限制了试验的Re数,从而影响了对跨音速巡航阻力的评估,因此需要对风洞试验结果的阻力进行Re数效应修正。分析了风洞试验结果阻力的误差构成,提出了Re数效应修正的风洞试验数据基础;进一步就跨音速巡航阻力的构成进行分析,论述了对最小阻力和升致阻力分项修正的方法,并对修正结果进行了验证,得到了一种可靠的工程方法。     

公共设施投资的决策模型探讨

公共设施投资的成本与产生的社会福利如何比较，社会效益的提高有多大等等一系列基本问题为政府所关心。这一问题的解决需要通过结合公共经济学的原理与近几年出现的一些新观点做出系统的可行性分析模型加以解决。本文就是基于公共经济学的理论并结合了笔者的一些新的观点所作的常识性的探索。     

Feasibility evaluation of failure models for predicting forming limit of metal foils

Forming limit of metal foil is an important index to evaluate its formability, and is of considerable significance to improve the quality of products. The ductile fracture (DF) behavior in microscale plastic deformation is remarkably affected by the geometry and grain size. To explore the size-dependent forming limit curve (FLC), the Holmberg and Marciniak tests of SUS304 foils with the thicknesses of less than 0.1 mm and diverse grain sizes were performed. In addition, the validity and feasibility of three types of existing failure models including Swift/Hill, Marciniak-Kuczynski (M-K) and DF criteria for predicting the micro-scaled FLCs were discussed. It is found that the Swift/Hill model possesses the worst accuracy with predicting deviation above 50%. Four classical DF criteria including Freudenthal, Ayada, Brozzo and Oh show great difference, and Oh model considering plastic anisotropy presents the best precision. The predicted deviation of M-K model is aggravated with increasing grain size and decreasing foil thickness, which is attributed to the intensified free surface roughening and transformation of fracture mechanism with miniaturization. This research thus provides a deeper understanding and valuable reference for the widespread application of FLC in microforming.     

C 波段全场效应晶体管化宽带微波接收机

介绍一个全场效应晶体管化 C 波段卫星转发器用微波接收机的方案,并给出微波通道部分的实验结果,其中采用元器件均以国内1986年生产,现空间仍在用的高可靠性器件为设计依据和实验样管。实验结果与法国汤姆逊公司1986年为我国研制生产的 C 波段接收机(以下简称法国接收机)相比,电气指标均能达到该公司产品水平,同时具有结构简单、体积小、低功耗等优点。该方案同样适于 Ku波段应用。     

平均应变效应的循环粘塑性描述

提出了一个考虑具有平均应变循环变形行为的粘塑性本构模型,在该模型中,引入了可以计及平均应变效应的应变幅值记忆参数,构造了相应的背应力演化方程,定义了恰当的非比例度;还提出了对先前加载历史循环变形行为衰减记忆的各向同性变形阻力演化方程。模型用于１Ｃｒ１８Ｎｉ９Ｔｉ不锈钢的平均应变效应的本构描述,结果表明模型合理。     

Dayside ionospheric uplift during strong geomagnetic storms as detected by the CHAMP,SAC-C,TOPEX and Jason-1 satellites

Ionosphere response to severe geomagnetic storms that occurred in 2001–2003 was analyzed using data of global ionosphere maps (GIM), altimeter data from the Jason-1 and TOPEX satellites, and data of GPS receivers on-board CHAMP and SAC-C satellites. This allowed us to study in detail ionosphere redistribution due to geomagnetic storms, dayside ionospheric uplift and overall dayside TEC increase. It is shown that after the interplanetary magnetic field turns southward and intensifies, the crests of the equatorial ionization anomaly (EIA) travel poleward and the TEC value within the EIA area increases significantly (up to ∼50%). GPS data from the SAC-C satellite show that during the main phase of geomagnetic storms TEC values above the altitude of 715 km are 2–3 times higher than during undisturbed conditions. These effects of dayside ionospheric uplift occur owing to the “super-fountain effect” and last few hours while the enhanced interplanetary electric field impinged on the magnetopause.     

C/C-Cu复合材料的烧蚀形貌和烧蚀机理

以PAN预氧化纤维整体毡为增强体,经碳化、等温CVI致密化后制备多孔的C/C复合材料预制体,利用气体压力浸渗法将Cu引入C/C预制体中制备C/C-Cu复合材料。采用氢氧(H2-O2)焰考核C/C-Cu复合材料的烧蚀性能,经扫描电镜和电子能谱对不同烧蚀区域的微观结构和成分进行分析,结果表明:预制体密度为0.96 g/cm3的C/C-Cu复合材料的线烧蚀率和质量烧蚀率分别为4.75μm/s、0.223 mg/s,烧蚀性能优良;其烧蚀表面具有不同的宏观形貌,在烧蚀中心区产生了明显的凹坑,主要烧蚀机制为C/C预制体的氧化和铜基体的机械冲刷;烧蚀过渡区聚集了大量的铜基体,其烧蚀机制为Cu的热氧化和机械冲刷;烧蚀边缘区材料表面变黑,主要因为C/C的氧化。为了提高C/C-Cu的烧蚀性能,需要发挥C/C预制体的"钉扎"作用,阻止Cu在高温下被气流冲刷而发生流动。     

尺度效应下大功率伺服电机再生冷却通道超临界态甲烷传热特性研究

针对飞行器电动执行机构的大功率伺服电机强化散热问题,建立了不同尺度的电机缠绕式螺旋管再生冷却通道数值模型,对超临界态甲烷在尺度效应影响下的传热特性和机理进行研究,探讨了不同尺度冷却通道中超临界态甲烷所受重力浮升力和离心浮升力对传热性能的影响.结果表明,离心浮升力及重力浮升力均受到超临界态甲烷热物性剧烈变化的影响;在相同...     

Periodic atomization characteristics of an impinging jet injector element modulated by Klystron effect

An experimental study on the Klystron effect of periodic injection modulated by pressure drop fluctuations on subsequent atomization is conducted. Time-resolved atomization backlit images and atomization Mie scatter images are captured by using the high speed camera. It is found that periodicity of forced atomization relies on pressure drop fluctuation amplitude and phase differences between atomization and pressure drop fluctuations relate to fluctuation frequencies. This feature of periodic atomization induced by Klystron effect corresponds to periodicities and high amplitudes of pressure fluctuations in unstable combustion chambers and chaos and low amplitudes of pressure fluctuations in stable combustions chambers. Drastically periodic varying of gross surface area of droplets with time was shown in Mie scatter images. The importance of periodic impinging jet atomization modulated by pressure drop fluctuations for acoustic liquid propellant combustion instabilities is illustrated.