快速阀门同步控制系统

本文阐述了自在由飞弹道靶试验中,利用微波相干原理,取得模型运动的起步信号,经过与模型运动速度相对应的延时后,去触发控制电路,引爆阀体内的电雷管,控制阀门的开启和关闭的同步控制系统。     

Daytime VHF amplitude scintillations recorded at an Indian low-latitude station,Waltair (17.7°N, 83.3°E) during 1997–2003

In this research, it is presented the daytime amplitude scintillations recorded at VHF frequency (244 MHz) at an Indian low-latitude station, Waltair (17.7°N, 83.3°E) during seven continuous years (1997–2003). Contrary to the nighttime scintillation seasonal trends, the occurrence of daytime scintillations maximizes during summer followed by winter and the equinox seasons. The fade depths, scintillation indices and the patch durations of daytime scintillations are meager when compared with their nighttime counterparts. A co-located digital high frequency (HF) ionosonde radar confirms the presence of sporadic (Es) layers when daytime scintillations are observed. The presence of daytime scintillations is evident when the critical frequency of the Es-layer (foEs) is ≥4 MHz and Es-layers are characterized by a highly diffuse range spread Es echoes as can be seen on ionograms. It is surmised that the gradient drift instability (GDI) seems to be the possible mechanism for the generation of these daytime scintillations. It is quite likely that the spread Es-F-layer coupling is done through polarization electric fields (Ep) that develop inside the destabilized patches of sporadic E layers, which are mapped up to the F region along the field lines as to initiate the daytime scintillations through the GDI mechanism. Further, the presence of additional stratification of ionosphere F-layer, popularly known as the F3-layer, is observed on ionograms once the Es-layers and daytime scintillations are ceased.     

纳米碳粉掺杂对激光烧蚀GAP的推进性能影响

实验以含能聚合物聚叠氮缩水甘油醚(Glycidyl azide polymer,GAP）作为激光烧蚀微推力器的靶材。通过对不同浓度纳米碳粉掺杂和靶材厚度下激光烧蚀GAP的比冲、冲量耦合系数和能量转化效率测量，结合靶材喷射羽流图像，分析了纳米碳粉掺杂提高激光烧蚀聚合物靶材推进性能的机理，给出纳米碳粉掺杂的适用方式。实验结果表明：透射式下，掺杂纳米碳粉之后，聚合物对激光的吸收大幅增强，但激光烧蚀推进性能不随掺杂浓度增加而显著提升；纳米碳粉吸收激光能量形成温度极高的局部热区促进聚合物中化学能的释放，是推进性能提升的主要原因；掺杂纳米碳粉之后的GAP烧蚀深度降低，表现出面吸收特性；随着靶材厚度的增加，未完全烧蚀的工质质量增加，使得靶材的利用率大大降低，导致聚合物推进性能下降。实验中掺杂3%纳米碳粉、厚度为54 μm的GAP靶材最优能量转化效率超过250%，适合作为透射式激光烧蚀微推力器的靶材。     

Maximal admissible mode decision delay in terminal guidance

Mode decision-maker is a critical component in the logic-based Integrated Estimation and Guidance(IEG) system. For the best possible estimation and guidance performance, the mode decision delay of the mode decision-maker should be limited to a range as small as possible. This paper presents a numerical method for computing the maximal admissible mode decision delay that varies with time-to-go. Particular attention has been paid to highly maneuvering target interception in terminal guidance. The results of this research offer useful guidelines for the design of the mode decision-maker in IEG systems.     

考虑输入饱和的固定翼无人机自适应增益滑模控制

针对复杂环境下的固定翼无人机飞行控制问题，考虑输入饱和以及复杂外界干扰的影响，提出一种基于自适应滑模控制方法的固定翼无人机飞行控制策略。首先，对固定翼无人机模型进行介绍，将模型分为姿态子系统和速度子系统；其次，针对姿态子系统和速度子系统的特点以及控制需求，分别采用自适应多变量螺旋滑模和自适应快速超螺旋滑模设计姿态控制器和速度控制器，该策略无需设计干扰观测器对外界干扰进行估计，仍然可以实现固定翼无人机对姿态参考指令和速度参考指令的有限时间精确跟踪，并基于Lyapunov的稳定性分析方法证明了闭环系统的稳定性。最后，对本文所提出的控制策略进行了仿真验证，结果表明该控制策略具有良好的控制性能。     

Backstepping sliding-mode control of stratospheric airships using disturbance-observer

In the presence of unknown disturbances and model parameter uncertainties, this paper develop a nonlinear backstepping sliding-mode controller (BSMC) for trajectory tracking control of a stratospheric airship using a disturbance-observer (DO). Compared with the conventional sliding mode surface (SMS) constructed by a linear combination of the errors, the new SMS manifold is selected as the last back-step error to improve independence of the adjustment of the controller gains. Furthermore, a nonlinear disturbance-observer is designed to process unknown disturbance inputs and improve the BSMC performances. The closed-loop system of trajectory tracking control plant is proved to be globally asymptotically stable by using Lyapunov theory. By comparing with traditional backstepping control and SMC design, the results obtained demonstrate the capacity of the airship to execute a realistic trajectory tracking mission, even in the presence of unknown disturbances, and aerodynamic coefficient uncertainties.     

Two-stream instability generation in the lunar ionosphere

The Two-stream Instability (TSI) generation is studied analytically in the lunar ionosphere. The TSI is a tiny perturbation in the electron plasma density, due to which an electric field grows with time and this growth is facilitated by the electron plasma in the background. In lunar ionosphere, the TSI comes into existence when the solar wind interacts unhindered with the tenuous lunar electron plasma in the surface bound exosphere. In this study, the conditions which allow the TSI to form and the subsequent instability growth with time i.e. the growth factor, is estimated. Initially, the threshold condition for the TSI to take place is determined. Thereafter, the solar wind and lunar plasma parameter contribution to trigger TSI is investigated along with the effect of these parameters in the evolution of TSI. The plasma TSI evolution with the passage of time is also depicted in phase space diagram with Particle-In-Cell simulations.     

航天器近距离交会的固定时间终端滑模控制

针对航天器近距离交会段的位置姿态耦合控制问题，假设航天器受外界干扰且目标航天器存在空间自由翻滚情形时，基于固定时间概念设计了一种六自由度位姿终端滑模自适应控制器，通过引入显含正弦函数的切换项来避免奇异问题。此外所设计的控制器含双幂次项，不仅能全局提高姿态和位置的跟踪速度及精度，还能估计系统稳定所需的时间上界，且该上界与状态初始值无关。基于Lyapunov方法分析了闭环系统的固定时间稳定性。仿真结果表明，该控制器能快速实现对航天器近距离交会时相对位置和姿态的控制，具有较高的精度和良好的干扰抑制能力。     

Sliding mode control design for oblique wing aircraft in wing skewing process

When the wing of Oblique Wing Aircraft (OWA) is skewed, the center of gravity, inertia and aerodynamic characteristics of the aircraft all significantly change, causing an undesirable flight dynamic response, affecting the flying qualities, and even endangering the flight safety. In this study, the dynamic response of an OWA in the wing skewing process is simulated, showing that the three-axis movements of the OWA are highly coupled and present nonlinear characteristics during the wing skewing. As the roll control efficiency of the aileron decreases due to the shortened control arm in an oblique configuration, the all-moving horizontal tail is used for additional roll and the control allocation is performed based on minimum control energy. Given the properties of pitch-roll-yaw coupling and control input and state coupling, and the difficulty of establishing an accurate aerodynamic model in the wing skewing process due to unsteady aerodynamic force, a multi-loop sliding mode controller is formulated by the time-scale separation method. The closed-loop simulation results show that the asymmetric aerodynamics can be balanced and that the velocity and altitude of the aircraft maintain stable, which means that a smooth transition is obtained during the OWA’s wing skewing.     

装备激励约束定价模式机理对比分析与设计

激励约束定价模式能够极大调动承包商积极性，是控制装备成本的一种重要方法。通过深入分析美军激励约束定价模式和我军激励约束定价模式的设计机理，提出了承包商的期望利润和军方期望价格的计算方法，并通过对比不同定价模式的特点，在借鉴2种激励约束定价模式优点基础上，设计了一种新的激励约束定价策略，提出了指导装备激励约束定价模式改革的对策建议。最后，通过算例对本文方法进行了解释，同时验证了本文方法的有效性。