高超声速边界层的转捩及预测

首先描述了边界层转捩的基本过程及研究内容。在此基础上,指出了高超声速边界层不同于不可压缩边界层的流动不稳定性特性,并介绍了边界层的转捩机理与感受性特征;给出了高超声速三维边界层中预测转捩的常用方法,并着重介绍了多用于工程实际的e N方法以及对e N方法的理性改进,同时列举了在高超声速三维边界层中应用e N方法实现转捩预测的多个实例。最后,分析并总结了高超声速边界层转捩预测所存在的困难及需要解决的问题。     

高超声速边界层转捩机理及应用的若干进展回顾

高超声速边界层转捩对飞行器的热传递、表面摩阻和流动分离等有重要影响,尤其是再入飞行器和吸气式巡航飞行器。然而,人们对边界层转捩机理中的很多问题认识还不清楚,或存在争议。本文从扰动波演化的角度回顾了高超声速边界层感受性、线性稳定性和非线性作用的国内若干研究进展,并以基于谐波共振的人工转捩技术为例示范了这些机理认识在转捩控制上的应用。扰动的产生和发展是认识边界层转捩机理的核心。通过研究扰动波来认识边界层转捩机理,开展应用创新研究对提升飞行器性能具有重要意义。     

The Low-Latitude Boundary Layer at the Flanks of the Magnetopause

This is a brief overview on what we know and do not know about the low-latitude boundary layer (LLBL) at the flanks of the magnetotail. On the basis of recent observations, simulations and theories we conclude that reconnection is the dominant process in generating the LLBL and its structure probably even under northward IMF conditions. Part of the LLBL always seems to be on open field lines. Possibly the LLBL possesses a double structure with its outer part open and inner part closed. Anomalous diffusive processes cannot sustain the LLBL but provide sufficient diffusivity for reconnection. Strong diffusion is only expected in narrow localized regions and can make the transition to superdiffusion. Kelvin-Helmholtz instability (KHI) is favoured for northward IMF, producing vortices at the tail flanks. Its contribution to efficient mass transport still remains questionable. Coupling of the LLBL to the ionosphere can strongly affect the internal structure of the LLBL, causing turbulent eddies and detachments of plasma blobs as also field-aligned currents and electron heating. The structure and dynamics of the LLBL are affected by field-aligned electric potentials that decouple the LLBL from the ionosphere. Non-ideal coupling simulations suggest that the dusk flank is decoupled, favouring KHI, while the dawn flank is dominated by currents and turbulence.     

用特征根构造变系数线性最佳控制

本文研究单输入n阶常系数线性系统满足二次型指标(积分区间有限,终点给定为(o,…o)) 的最佳控制。所得结果使用户无需解Riccati方程,也不要用数值法解出两点边值问题,仅由这个两点边值问题的特征根即可构造变系数线性最佳控制。这个结果既适于低价(n=1,2,3)时用来写出变系数线性最佳控制的一般表达式(17)—(19),也适于高阶时用计算机计算,其程序已用FORTRAN-Ⅳ在AD三TAMAX-186机上实现。     

Effect of wall suction on leading edge contamination

This paper is devoted to an experimental study of swept wing leading edge contamination by the turbulence emanating from the wing-wall junction. The main objective is to delay the contamination onset by applying surface suction along the attachment line. Two series of experiments are described; the first one was performed in a small wind tunnel at CERT ONERA, the second one was carried out in the F2 wind tunnel at Le Fauga Mauzac centre. Hot film measurements showed that leading edge contamination could be delayed up to very large Reynolds numbers. We also studied the behaviour of the relaminarized boundary layer downstream of the sucked region, along the span as well as in the chordwise direction.     

平板上钝缘舵在超声速绕流中的三维分离特性研究

对于平板上的直立钝缘舵在M_∞=1.79、2.04和2.50的条件下,研究了该平板干扰区中的三维分离特性。着重讨论了钝缘直径、舵面迎角和来流马赫数对主分离线位置和形状的影响。分析了该类三维分离在性态上更强地依赖于无粘流动特性。此外,还对分离区内的二次分离发展过程和形态进行了初步讨论。     

多尺度子域基函数矩量法解的稳定性与迭代法

通过对几个具体实例的计算，证实了在电磁场边值问题的矩量法求解过程中，选用不同的基函数其解的数值稳定性会有很大的差别。从而有可能选择一种数值稳定性比较好的基函数来进行矩量法求解。另一方面，提出了选用多尺度子域基函数，并通过多次迭代来提高矩量法解的精度的算法。实例计算表明，该算法不仅可以有效地降低系数矩阵的条件数，而且还降低了对计算机内存容量的要求，是一种有效的、稳定的算法     

Multi-channel discharge characteristics cutting by ultra-fine wire-EDM

Compared with a copper wire electrode, molybdenum wire with a poor conductor is usually used as the electrode in high speed wire-cut electrical discharge machining(HSWEDM), so the resistance of an ultra-fine wire cannot be ignored. To study the differences of discharge characteristics between the ultra-fine wire and the conventional diameter wire, the continuous discharge waveform of two kinds of wire electrodes was compared. It was found that there was a multichannel discharge phenomenon in the...     

Case study of inclined sporadic E layers in the Earth’s ionosphere observed by CHAMP/GPS radio occultations: Coupling between the tilted plasma layers and internal waves

We have used the radio occultation (RO) satellite data CHAMP/GPS (Challenging Minisatellite Payload/Global Positioning System) for studying the ionosphere of the Earth. A method for deriving the parameters of ionospheric structures is based upon an analysis of the RO signal variations in the phase path and intensity. This method allows one to estimate the spatial displacement of a plasma layer with respect to the ray perigee, and to determine the layer inclination and height correction values. In this paper, we focus on the case study of inclined sporadic E (E_s) layers in the high-latitude ionosphere based on available CHAMP RO data. Assuming that the internal gravity waves (IGWs) with the phase-fronts parallel to the ionization layer surfaces are responsible for the tilt angles of sporadic plasma layers, we have developed a new technique for determining the parameters of IGWs linked with the inclined E_s structures. A small-scale internal wave may be modulating initially horizontal E_s layer in height and causing a direction of the plasma density gradient to be rotated and aligned with that of the wave propagation vector k. The results of determination of the intrinsic wave frequency and period, vertical and horizontal wavelengths, intrinsic vertical and horizontal phase speeds, and other characteristics of IGWs under study are presented and discussed.     

Streamwise vortex generation by the rod

The technology development related to aerodynamics is leading to ever increasing loads of wings, airfoils and turbine and compressor blades. The increase in aerodynamic forces is often leading to flow separation and depreciation of the aerodynamic performance of flying objects or propulsion systems. Flow control methods are required to avoid these negative effects. In the recent two decades the flow control by means of air-jet vortex generators has been also intensively investigated. In this method a streamwise vortex is introduced by an oblique jet. The necessity to supply air by a pipe system may be considered a disadvantage. In order to eliminate this feature, it has been proposed to put out a rod instead of a jet. It has been shown that the application of a rod can introduce the same effect as a jet, as long as the streamwise vortex generation is concerned and appropriate dimensions are used. The present paper focuses on the influence of rod vortex generators on a flow pattern downstream. The results presented here concern experimental and numerical investigations and provide guidelines for the design of a new flow control method dedicated mainly to external flows.