Improvement of Baldwin-Lomax turbulence model for supersonic complex flows

Entropy represents the dissipation rate of energy. Through direct numerical simulation (DNS) of supersonic compression ramp flow, we find the value of entropy is monotonously decreasing along the wall-normal direction no matter in the attached or the separated region. Based on this feature, a new version of Baldwin-Lomax turbulence model (BL-entropy) is proposed in this paper. The supersonic compression ramp and cavity-ramp flows in which the original Baldwin-Lomax model fails to get convergent solutions are chosen to evaluate the performance of this model. Results from one-equation Spalart-Allmaras model (SA) and two-equation Wilcox k-x model are also included to compare with available experimental and DNS data. It is shown that BLentropy could conquer the essential deficiency of the original version by providing a more physically meaningful length scale in the complex flows. Moreover, this method is simple, computationally efficient and general, making it applicable to other models related with the supersonic boundary layer.     

Recent ozone investigations over Bulgaria by remote sensing: Ground-based and satellite data

This presentation deals with the recent investigations of the dynamics of the total ozone content (TOC) and of the lower troposphere ozone over Bulgaria, South-Eastern Europe.     

Transition study of 3D aerodynamic configures using improved transport equations modeling

As boundary layer transition plays an important role in aerodynamic drag prediction,the proposal and study of transition prediction methods simulating the complex flow phenomena are prerequisite for aerodynamic design. In this paper, with the application of the linear stability theory based on amplification factor transport transition equations on the two-equation shear stress transport(SST) eddy-viscosity model, a new method, the SST-N TS-N CF model, is yielded. The new amplification factor transport equation for the crossflow instability induced transition is proposed to add to the N TS equation proposed by Coder, which simulates Tollmien–Schlichting wave transition. The turbulent kinetic energy equation is modified by introducing a new source term that simulates the transition process without the intermittency factor equation. Finally, coupled with these two amplification factor transport equations and SST turbulence model, a four-equation transition turbulence model is built. Comparisons between predictions using the new model and wind-tunnel experiments of NACA64(2)A015, NLF(2)-0415 and ONERA-D infinite swept wing and ONERAM6 swept wing validate the predictive quality of the new SST-N_(TS)-N_(CF) model.     

有迎角旋转钝锥的烧蚀滞后滚转力矩的算法

有迎角的再入旋转钝锥由于周向烧蚀滞后将产生滚转力矩。在烧蚀滞后滚转力矩的计算方法中。本文主要介绍滞后引射率和粗糙度对壁面磨擦系数联合影响的一种快速计算方法。给出计算结果与实验数据的比较，分析烧蚀滞后滚转力矩的模数随飞行参数的变化。     

PDE model-based boundary control of a spacecraft with double flexible appendages under prescribed performance

This paper investigates a boundary control scheme of a spacecraft with double flexible appendages under prescribed performance. The flexible spacecraft system comprises a rigid central hub and two flexible appendages regarded as continuum models, so that the motion of the system can be portrayed by using partial differential equations (PDEs). In this paper, only one control torque and two control forces are applied to guarantee the desired attitude angle of the spacecraft and simultaneously suppress the vibration of the two flexible appendages. Moreover, the angle tracking error of the spacecraft can be restricted in a small residual set under a minimum convergence rate by adopting the prescribed performance technique (PPT). The stability of the boundary control is analyzed by employing LaSalle’s invariance principle. Finally, the feasibility of the proposed controller is verified through numerical results.     

大型伞绳帆和抽打现象连续模型及验证

文章主要推导了可用于描述大型降落伞绳帆和抽打现象的一般绳索三维动力学连续模型,及弦坐标系下可用于求解绳帆现象的两点边值问题(BVP)模型,并采用某型号大型降落伞的空投录像和杆件算例对模型进行验证对比,说明了模型的正确性,采用这一连续模型能够更直观地对大型伞的绳帆和抽打现象进行定性和定量分析。     

对称交叉激波和湍流边界层相互作用的数值研究

针对两种双尖鳍外形的对称交叉激波与湍流边界层相互作用,采用N-S方程和两种湍流模型进行了计算。研究了网格收敛性、鳍的角度和湍流模型对壁面压强、Stanton数和壁面摩擦力线的影响。弱相互作用的计算结果较好,强相互作用的壁面压强和摩擦力线的计算结果与试验吻合较好,而Stanton数的计算结果较差,峰值高达试验的2.5倍左右。随着鳍的角度的增加,壁面压强和Stanton数的分布从单调分布发展为M型分布,两者的峰值不在相同的位置。湍流模型对壁面压强和壁面摩擦力线影响很小,对Stanton数计算的影响很大,SST模型比BSL模型表现好一些。     

亚声速进气道出口流场畸变控制研究

一种亚声速进气道出口流场存在较严重的总压畸变,为改善其出口流场品质,抑制总压畸变,首先分析了引起总压畸变的原因,即进气道扩张段内边界层发生分离;其次提出了在进气道内安装叶片式涡流发生器的流动控制方法,并进行了仿真验证;最后进行了进气道缩比模型的风洞试验。试验结果表明,在进气道设计马赫数(0.65)和非设计马赫数(0.21)条件下,安装叶片式涡流发生器后,在流量系数0.4～0.85范围内,进气道出口流场的综合畸变指数分别平均降低14.7%和23.8%,因此验证了流动控制方法的有效性。     

Theories and methods for designing hypersonic high-enthalpy flow nozzles

Hypersonic high-enthalpy wind tunnels have been a challenge to ground tests in aerospace research area for decades and its test flow uniformity is one of the most important parameters for evaluating wind tunnel performances. Regarding to the performance requirement, theories and methods for designing hypersonic flow nozzles at high enthalpy conditions are quite difficult, but very interesting topics, especially when air molecule dissociations take place in wind tunnel test gas reservoirs. In thi...