湍流型动态畸变下涡喷发动机稳定性分析

对湍流型动态畸变进气流场进行了分析和描述，给出了随机涡在压气机进口所产生的总压脉动的通用分布曲线，并统计地分析和预测了该总压脉动引起的最可能最大失速裕度损失。数值分析表明在考虑压气机对非定常流响应方面，最为关心的压气机最大失速裕度损失值是脉动压力的均方根值、功率谱密度、压气机进口转子弦长和转速的函数。     

进气压力畸变对某三级风扇流场的影响

介绍了在某三级风扇上进行的固定式插板畸变试验，并详细分析了进气压力畸变对进、出口稳态压力和温度的影响。同时，采用频域和幅值域分析方法对脉动压力进行了分析，给出了脉动压力功率谱密度、幅值概率密度和自相关、互相关分析。     

Banach空间中算子余弦函数的一个特征

本文主要研究Ｂａｎａｃｈ空间中算子余弦函数与二阶无阻尼方程的Ｃａｕｃｈｙ问题之间的某些关系,借助于此类Ｃａｕｃｈｙ问题的解的存在性与唯一性,给出算子余弦函数无穷小生成元的不同于Ｈｉｌｅ－Ｙｏｓｉｄａ型特征的另一个特征。     

飞机变形自动化测量方法研究

为解决以往飞机变形测量模式中人工干预较多,受测量环境影响较大,测量时间长等问题,基于Geo COM技术和RS232,在计算机与全站仪之间进行数据交换,设计了一套自动化测量系统。在测量过程中由标志点的机体理论坐标反算其在当前测站中的极坐标,从而在测量过程中驱动全站仪指向待测点,减少人工瞄准时间,并由计算机实时解算结果数据。经实际飞行试验验证表明,测量时间缩短为原来时间一半,大大提高了工作效率。     

基于电力综合集成的多绕组双流发电机技术分析

为解决采用传统发电机的移动电站输出电源种类单一,而采用多台发电机又会造成底盘过载影响机动性的问题,文章基于电力综合集成技术,分析研究实现发电机的双流发电的关键技术,突破发电机多绕组发电及励磁解耦等难题,减小了电机体积、降低了电机重量,有利于移动电站的多功能化与小型化设计。     

一种叶片截面线光顺及等距面生成方法

采用等距面生成球头刀加工刀具轨迹是曲面加工中一种常用的方法。但是,在对叶身曲面进行等距偏置时,经常出现无法偏置的问题。针对该问题,分析了曲面偏置自相交原因,并根据叶片类零件叶身曲面的特点,提出了一种叶身截面线光顺及等距面生成方法。该方法首先采用Kjellander方法将原始截面线进行自动光顺,然后根据光顺后的原始截面线和数据采样法构造偏置截面线,最后通过截面线放样法构造叶身曲面等距面。实例表明,采用Kjellander方法可以实现叶片曲面的自动光顺和叶片曲面等距面的构造。     

Geometric calibration of Colour and Stereo Surface Imaging System of ESA’s Trace Gas Orbiter

There are many geometric calibration methods for “standard” cameras. These methods, however, cannot be used for the calibration of telescopes with large focal lengths and complex off-axis optics. Moreover, specialized calibration methods for the telescopes are scarce in literature. We describe the calibration method that we developed for the Colour and Stereo Surface Imaging System (CaSSIS) telescope, on board of the ExoMars Trace Gas Orbiter (TGO). Although our method is described in the context of CaSSIS, with camera-specific experiments, it is general and can be applied to other telescopes. We further encourage re-use of the proposed method by making our calibration code and data available on-line.     

扇形段与全环燃烧室熄火性能换算研究

为研究不同类型燃烧室试验件熄火性能之间的关系,开展了扇形段和全环燃烧室的熄火性能试验.通过试验对比了二者熄火规律的相似性和差异性,并分析了造成差异的主要因素.以Lefebvre熄火模型为基础,结合雾化数据,拟合得到扇形段与全环燃烧室的贫油熄火经验关系式,并推算出二者熄火性能的定量换算公式.结果表明:扇形段与全环燃烧室的熄火边界变化规律类似,但在相同的工作状态条件下,全环燃烧室的贫油熄火油气比小于扇形段的相应值.     

Effect of blade tip winglet on the performance of a highly loaded transonic compressor rotor

The tip leakage flow has an important influence on the performance of transonic com-pressor. Blade tip winglet has been proved to be an effective method to control the tip leakage flow in compressor, while the physical mechanisms of blade tip winglet have been poorly understood. A numerical study for a highly loaded transonic compressor rotor has been conducted to understand the effect of varying the location of blade tip winglet on the performance of the rotor. Two kinds of tip winglet were designed and investigated. The effects of blade tip winglet on the compressor over-all performance, stability and tip flow structure were presented and discussed. It is found that the interaction of the tip winglet with the flow in the tip region is different when the winglet is located at suction-side or pressure-side of the blade tip. Results indicate that the suction-side winglet (SW) is ineffective to improve the performance of compressor rotor. In addition, a significant stall range extension equivalent to 33.74% with a very small penalty in efficiency can be obtained by the pressure-side winglet (PW). An attempt has been made to explain the fundamental mechanisms of blade tip winglet in detail.     

燃料分级对旋流火焰的动态特性影响研究

为深入研究分级旋流火焰特性,以分级旋流模型燃烧室为研究对象,对四个不同燃料分级比(Rf)条件下的分级旋流火焰进行了数值研究,在时均燃烧场特性分析的基础上进一步对燃料分级比为1和3两个工况进行了基于壁面建模的大涡模拟(WMLES)研究。结果表明:燃料分级比的改变会影响中心回流区(CRZ)的长度和宽度。燃烧室中截面的散点分布图能够显示出不同燃料分级比条件下的燃烧特征。燃料分级比为1时,燃烧室剪切层仅存在零散的涡破碎区;而燃料分级比为3时,伴随涡破碎区还出现了单螺旋分支进动涡核(PVC)。通过FFT变换获得的燃烧室内剪切层速度能谱主频与进动涡核的旋转频率相同,表明内剪切层速度脉动的产生与进动涡核有关。另外进动涡核会使流场内的燃料分布和燃烧模式发生周期性的变化,进而影响燃烧过程。调整燃料分级比在1附近,能够使分级火焰达到稳定燃烧降低排放的目标。