涡轮叶片内部微小V肋-凹陷涡复合冷却流动与传热数值模拟

为强化航空发动机涡轮叶片内冷通道传热性能,针对带有微小V肋-凹陷涡高效复合冷却结构矩形通道,采用Abe Kondoh Nagano （AKN） k-ε湍流模型数值模拟研究了肋高与凹陷深度组合对流动传热特性的影响机理。结果表明,当凹陷深度一定,复合结构的强化换热效果随肋高增加而增加,3mm肋高复合结构的传热相比纯凹陷提高了87.1%;当肋高一定,传热随凹陷深度增加先增强后基本保持不变,6mm深凹陷复合结构相比纯V肋提高了52.8%。通过在凹陷上游布置V肋,增强了越过V肋冲入凹陷内流体的湍动能,从而使凹陷前部回流区减小;同时来自微小V肋的涡流与凹陷内部的涡流相互作用,增强了整个流场的动量和热量输运,使通道换热均匀,并相较纯凹陷或纯V肋结构均有显著提升。     

Parametric study of turbine NGV blade lean and vortex design

The effects of blade lean and vortex design on the aerodynamics of a turbine entry nozzle guide vane (NGV) are considered using computational fluid dynamics. The aim of the work is to address some of the uncertainties which have arisen from previous studies where conflicting results have been reported for the effect on the NGV. The configuration was initially based on the energy efficient engine turbine which also served as the validation case for the computational method. A total of 17 NGV configurations were evaluated to study the effects of lean and vortex design on row efficiency and secondary kinetic energy. The distribution of mass flow ratio is introduced as an additional factor in the assessment of blade lean effects. The results show that in the turbine entry NGV, the secondary flow strength is not a dominant factor that determines NGV losses and therefore the changes of loading distribution due to blade lean and the associated loss mecha-nisms should be regarded as a key factor. Radial mass flow redistribution under different NGV lean and twist is demonstrated as an addition key factor influencing row efficiency.     

引进装备水平检测仪的国产化研究

为实现引进装备水平检测仪的国产化功能替换,提出了一种基于逆向工程方法和信号处理技术的新思路。通过剖析原水平检测仪的组成、工作原理及性能指标,对其进行反设计。目前,国产化水平检测仪已用于工厂装备修理和部队装备的维护保障,能够满足引进装备的正常使用要求,使用维护简单、方便。     

星图匹配制导中的关键技术

为了提高新一代弹道导弹的快速、机动反击能力和射击精度，采用星光，惯性组合制导足最佳的选择。本论文给出了基于双星敏感器的、星图匹配制导系统的关键技术。提出了根据弹道设计导航星表．极大地简化了弹载星表；提出了一种适用于星光制导的凸多边形箅法，合理地减少了匹配的星对角距数目。这两项技术保证了星图匹配制导技术的实用性。提出了一种分离初始定位、定向误差及平台漂移误差方法。采用凸多边形的星图识别算法可同时获得多颗星的瞬时位置，结合恒星在像平面的位置可解算导弹在赤道惯性系和发射点惯性系的三轴姿态，最后，给出了导弹初始定位、定向误差的数学表达式。仿真结果表明了该方法的有效性。     

去中心化时差频差直接定位方法

针对原始利用时差频差的直接定位(DPD)方法存在数据传输量和计算量大的瓶颈,提出了两种去中心化直接定位方法。第1种方法采用去中心化配对方案,只将各观测站截获信号在站间进行一次传输,将数据传输和计算分散到各观测站间并行计算互模糊函数(CAF),构造仅满足满秩条件的互模糊矩阵(CAM)。第2种方法根据推导的任意互模糊函数间关系公式,采用归约方式去中心化的在各观测站并行计算余下互模糊函数,补全互模糊矩阵。两种方法都降低了直接定位数据传输量,提高了计算效率。性能分析和仿真实验表明本文两种方法精度性能优于两步定位方法,在低信噪比时两种方法都可达到比较理想的精度性能,在高信噪比时第2种方法与原始直接定位方法的精度性能相当。     

Reliability analysis of aero-engine blades considering nonlinear strength degeneration

To comprehensively consider the effects of strength degeneration and failure correlation, an improved stress-strength interference (SSI) model is proposed to analyze the reliability of aeroengine blades with the fatigue failure mode. Two types of TC4 alloy experiments are conducted for the study on the damage accumulation law. All the parameters in the nonlinear damage model are obtained by the tension-compression fatigue tests, and the accuracy of the nonlinear damage model is verified by the damage tests. The strength degeneration model is put forward on the basis of the Chaboche nonlinear damage theory and the Griffith fracture criterion, and determined by measuring the fatigue toughness during the tests. From the comparison of two kinds of degeneration models based on the Miner’s linear law and the nonlinear damage model respectively, the nonlinear model has a significant advantage on prediction accuracy especially in the later period of life. A time-dependent SSI reliability model is established. By computing the stress distribution using the finite element (FE) technique, the reliability of a single blade during the whole service life is obtained. Considering the failure correlation of components, a modified reliability model of aero-engine blades with common cause failure (CCF) is presented. It shows a closer and more reasonable process with the actual working condition. The improved reliability model is illustrated to be applied to aero-engine blades well, and the approach purposed in this paper is suitable for any actual machinery component of aero-engine rotor systems.     

权力制约：经典范式、内在逻辑与语境化

实质意义上的权力制约肇始于权力分化之后，历经以道德制约权力、以权力制约权力、以社会制约权力等经典范式，体现了权力制约活动从关注权力执掌者、权力本体到关注权力归属者不断演变的内在逻辑。植根于我国国情的权力制约实践在伦理学、社会学途径方面与西方存有共性，但于政治学途径却存有个性。实现我国权力制约的语境化既需要体现权力制约的普遍性规律，更需要把握马克思主义政治观视域下权力制约的特殊性。     

A novel none once per revolution blade tip timing based blade vibration parameters identification method

The vibration caused blade High Cycle Fatigue (HCF) is seriously affects the safety operation of turbomachinery especially for aero-engine. Thus, it is crucial important to identify the blade vibration parameters and then evaluate the dynamic stress amplitude. Blade Tip Timing (BTT) method is one of the promising method to solve these problems. While, it need a high resolution Once Per Revolution (OPR) signal which is difficult to get for the aero-engine. Here, a Coupled Vibration Analysis (CVA) method for identifying blade vibration parameters by a none OPR BTT is proposed. The method assumes that every real blade has its own vibration performance at a given speed. Whereby, it can take any blade as the reference blade, and the other blades using the reference blade as the OPR for vibration displacement calculating and further parameter identifying. The proposed method is validated by numerical model. Also, experimental studies are carried out on a straight blade and a twisted three dimensional blade test rig as well as a large industrial axial compressor respectively. The results show that the proposed method can accurately identify the blade synchronous vibration parameters and quantitatively evaluate the mistuning in bladed disks, which lays a foundation for the reliability improvement of aero-engine.     

Decentralized formation pose estimation for spacecraft swarms

For spacecraft swarms, the multi-agent localization algorithm must scale well with the number of spacecraft and adapt to time-varying communication and relative sensing networks. In this paper, we present a decentralized, scalable algorithm for swarm localization, called the Decentralized Pose Estimation (DPE) algorithm. The DPE considers both communication and relative sensing graphs and defines an observable local formation. Each spacecraft jointly localizes its local subset of spacecraft using direct and communicated measurements. Since the algorithm is local, the algorithm complexity does not grow with the number of spacecraft in the swarm. As part of the DPE, we present the Swarm Reference Frame Estimation (SRFE) algorithm, a distributed consensus algorithm to co-estimate a common Local-Vertical, Local-Horizontal (LVLH) frame. The DPE combined with the SRFE provides a scalable, fully-decentralized navigation solution that can be used for swarm control and motion planning. Numerical simulations and experiments using Caltech’s robotic spacecraft simulators are presented to validate the effectiveness and scalability of the DPE algorithm.     

中国电视节目生产的本土化策略

研究中国电视节目生产中实施"本土化"策略的方式和意义。从电视媒体的生存环境入手,结合跨国媒体集团以及国内几家电视台本土化策略成功运用的案例,进行系统综合分析。使人们对电视节目的"本土化"有一个比较客观、理性的认识。那些能体现本土特色的电视节目才真正具有市场竞争力,才能吸引观众的眼球。