涡轮叶片内部微小V肋-凹陷涡复合冷却流动与传热数值模拟

为强化航空发动机涡轮叶片内冷通道传热性能,针对带有微小V肋-凹陷涡高效复合冷却结构矩形通道,采用Abe Kondoh Nagano （AKN） k-ε湍流模型数值模拟研究了肋高与凹陷深度组合对流动传热特性的影响机理。结果表明,当凹陷深度一定,复合结构的强化换热效果随肋高增加而增加,3mm肋高复合结构的传热相比纯凹陷提高了87.1%;当肋高一定,传热随凹陷深度增加先增强后基本保持不变,6mm深凹陷复合结构相比纯V肋提高了52.8%。通过在凹陷上游布置V肋,增强了越过V肋冲入凹陷内流体的湍动能,从而使凹陷前部回流区减小;同时来自微小V肋的涡流与凹陷内部的涡流相互作用,增强了整个流场的动量和热量输运,使通道换热均匀,并相较纯凹陷或纯V肋结构均有显著提升。     

Parametric study of turbine NGV blade lean and vortex design

The effects of blade lean and vortex design on the aerodynamics of a turbine entry nozzle guide vane (NGV) are considered using computational fluid dynamics. The aim of the work is to address some of the uncertainties which have arisen from previous studies where conflicting results have been reported for the effect on the NGV. The configuration was initially based on the energy efficient engine turbine which also served as the validation case for the computational method. A total of 17 NGV configurations were evaluated to study the effects of lean and vortex design on row efficiency and secondary kinetic energy. The distribution of mass flow ratio is introduced as an additional factor in the assessment of blade lean effects. The results show that in the turbine entry NGV, the secondary flow strength is not a dominant factor that determines NGV losses and therefore the changes of loading distribution due to blade lean and the associated loss mecha-nisms should be regarded as a key factor. Radial mass flow redistribution under different NGV lean and twist is demonstrated as an addition key factor influencing row efficiency.     

Reliability analysis of aero-engine blades considering nonlinear strength degeneration

To comprehensively consider the effects of strength degeneration and failure correlation, an improved stress-strength interference (SSI) model is proposed to analyze the reliability of aeroengine blades with the fatigue failure mode. Two types of TC4 alloy experiments are conducted for the study on the damage accumulation law. All the parameters in the nonlinear damage model are obtained by the tension-compression fatigue tests, and the accuracy of the nonlinear damage model is verified by the damage tests. The strength degeneration model is put forward on the basis of the Chaboche nonlinear damage theory and the Griffith fracture criterion, and determined by measuring the fatigue toughness during the tests. From the comparison of two kinds of degeneration models based on the Miner’s linear law and the nonlinear damage model respectively, the nonlinear model has a significant advantage on prediction accuracy especially in the later period of life. A time-dependent SSI reliability model is established. By computing the stress distribution using the finite element (FE) technique, the reliability of a single blade during the whole service life is obtained. Considering the failure correlation of components, a modified reliability model of aero-engine blades with common cause failure (CCF) is presented. It shows a closer and more reasonable process with the actual working condition. The improved reliability model is illustrated to be applied to aero-engine blades well, and the approach purposed in this paper is suitable for any actual machinery component of aero-engine rotor systems.     

A novel none once per revolution blade tip timing based blade vibration parameters identification method

The vibration caused blade High Cycle Fatigue (HCF) is seriously affects the safety operation of turbomachinery especially for aero-engine. Thus, it is crucial important to identify the blade vibration parameters and then evaluate the dynamic stress amplitude. Blade Tip Timing (BTT) method is one of the promising method to solve these problems. While, it need a high resolution Once Per Revolution (OPR) signal which is difficult to get for the aero-engine. Here, a Coupled Vibration Analysis (CVA) method for identifying blade vibration parameters by a none OPR BTT is proposed. The method assumes that every real blade has its own vibration performance at a given speed. Whereby, it can take any blade as the reference blade, and the other blades using the reference blade as the OPR for vibration displacement calculating and further parameter identifying. The proposed method is validated by numerical model. Also, experimental studies are carried out on a straight blade and a twisted three dimensional blade test rig as well as a large industrial axial compressor respectively. The results show that the proposed method can accurately identify the blade synchronous vibration parameters and quantitatively evaluate the mistuning in bladed disks, which lays a foundation for the reliability improvement of aero-engine.     

Framing holes within a loop hierarchy

We investigate the relation between nontrivial spatial concepts such as holes and string loops from a qualitative spatial reasoning perspective. In particular, we concentrate on a family of puzzles dealing with this kind of objects and explain how a loop formed in a string shows a similar behavior to a hole in an object, at least regarding the qualitative constraints it imposes on the solution of the puzzle. Unlike regular holes, however, we describe how string loops can be dynamically created and destroyed depending on the actions on the string. Furthermore, under a Knowledge Representation point of view, we provide a formalization that allows the different puzzle states to be described in terms of string crossings and loops, together with the actions that can be executed for a state transition and the complex effects they cause on the state representation. This implies the consideration of a formal representation of the side effects of actions that create or destroy string loops and the soundness of this representation with respect to the more general representation of string states in knot theory.     

Effects of blade aspect ratio and taper ratio on hovering performance of cycloidal rotor with large blade pitching amplitude

In recent years, a lot of research work has been carried out on the cycloidal rotors. However, it lacks thorough understanding about the effects of the blade platform shape on the hover efficiency of the cycloidal rotor, and the knowledge of how to design the platform shape of the blades. This paper presents a numerical simulation model based on Unsteady ReynoldsAveraged Navier–Stokes equations(URANSs), which is further validated by the experimental results. The effects of blade aspect ratio and taper ratio are analyzed, which shows that the cycloidal rotors with the same chord length have quite similar performance even though the blade aspect ratio varies from a very small value to a large one. By comparing the cycloidal rotors with different taper ratios, it is found that the rotors with large blade taper ratio outperform those with small taper ratio. This is due to the fact that the blade with larger taper ratio has longer chord and hence better efficiency. The analysis results show that the unsteady aerodynamic effects due to blade pitching motion play a more important role in the efficiency than the blade platform shape. Therefore we should pay more attention to the blade airfoil and pitching motion than the blade platform shape.The main contributions of this paper include: the analysis of the effects of aspect ratio and taper ratio on the hover efficiency of cycloidal rotor based on both the experimental and numerical simulation results; the finding of the main influencing factors on the hover efficiency; the qualitative guidance on how to design the blade platform shape for cycloidal rotors.     

《数控编程与加工技术》课程理实一体化教学改革探索

基于教学实践,对理实一体化教学模式在《数控编程与加工技术》课程教学应用中出现的问题及采取的相应对策进行论述,供教学同仁参考。     

存在剥离条件下颗粒物沉积过程的数值研究和实验验证

为了更加准确地模拟涡轮叶片表面颗粒物沉积的增长过程和分布状况,研究颗粒物沉积过程中粘附、剥离直至稳定平衡的规律,在经改进的颗粒粘附模型基础上考虑两种剥离形式,利用Fluent的User Defined Function (UDF)功能和网格重构技术,最终实现了熔融石蜡颗粒于带有气膜冷却的平板上沉积动态增长的过程。通过与相同条件下所得实验结果的对比,验证了所用模型的有效性和合理性。随后研究了是否加入剥离模型、气膜冷却吹风比、气膜孔射流角度等因素对沉积效果的影响。计算结果表明,考虑颗粒的剥离效应将减少颗粒物沉积的总量,尤其是在气膜孔后较短区域内;此外,吹风比的增加将使颗粒不易撞击壁面,已粘附的颗粒也更容易剥离从而降低沉积的厚度和质量;射流角度不断增大则使气膜覆盖效果变差,壁面温度升高,颗粒更易达到熔融状态沉积下来。研究发现该数值方法有助于更加精确地仿真沉积增长的过程,证实了吹风比和射流角度对沉积的分布和厚度有很大影响。当射流角度处于35°～40°时,可在一定程度上减少沉积。     

火箭发动机涡轮典型结构形式对叶片低周疲劳寿命的影响研究

以某火箭发动机涡轮为对象,研究了涡轮叶片带冠、不带冠、带部分冠及叶片空心等典型结构形式对叶片低周疲劳寿命的影响。结果表明:叶片不带冠可以消除叶片顶部的疲劳损伤,但使叶背根部损伤增大,危险点位于叶背根部,叶片寿命与带冠叶片相当;带部分冠叶片在消除叶顶疲劳损伤的同时,还可以减缓叶背根部的低周疲劳,危险点位于前缘根部,寿命比原叶片高约116%;叶片空心结构可以有效降低叶片的应力应变水平,减缓叶片疲劳的效果最好,空心叶片危险点位于前缘根部,寿命比原叶片高约370%。     

Characteristics and mechanisms of turboshaft engine axial compressor casing containment

To investigate the containment characteristics and mechanisms of axial compressor blade and casing in turboshaft engine, experimental and simulation research is conducted on Titanium alloy axial compressor blades and stainless steel simulator casings in this paper. Experiments for four thicknesses (from 0.8 mm to 1.4 mm) of casings are presented on high-speed spin tester. Perforation, ricochet with and without failure of the casings are obtained in test results. Three obvious bulges or dishing region are observed, petaling failure occurs in the first bulge or the third deformation region. Parabolic and elongated dimples are observed at the fracture surface. Finite Element (FE) models with calibrated Johnson-Cook material behavior law are built and analyzed by using explicit dynamic software for a better understanding on the containment behavior. Good agreement is obtained between the experimental observations and numerical predictions. The evolution of the impact force, energy absorption, temperature increase and the cracks’ propagation are analyzed. Three force peaks occur in the impact process. Energy analysis reveals that penetration condition of ricochet with failure leads to most internal energy of the casing.