运用低自由度协同优化的机翼结构气动多学科设计优化

 为了解决协同优化方法(CO)协调困难和计算量过大的问题,提出了低自由度协同优化方法(LDFCO)。LDFCO的系统级优化通过调整共享设计变量和辅助设计变量,使系统目标最优,并满足一致性约束条件。子系统优化通过调整局部设计变量,使子系统目标最优,并满足局部约束条件。子系统目标有2种形式：最小化本子系统的一致性约束函数和直接与系统目标有关的状态变量的加权和,或最小化一种不同于前者的一致性约束函数。着重研究了如何利用常规LDFCO/V1和基于代理模型的LDFCO/V1求解机翼的气动/结构多学科设计优化问题,并与CO方法进行了对比,结果表明常规LDFCO/V1和基于代理模型的LDFCO/V1都能成功地应用到机翼的多学科设计优化中,验证了LDFCO/V1的可行性和有效性。     

New Cutting Force Modeling Approach for Flat End Mill

A new mechanistic cutting force model for flat end milling using the instantaneous cutting force coefficients is proposed. An in-depth analysis shows that the total cutting forces can be separated into two terms: a nominal component independent of the runout and a perturbation component induced by the runout. The instantaneous value of the nominal component is used to calibrate the cutting force coefficients. With the help of the perturbation component and the cutting force coefficients obtained above, the cutter runout is identified. Based on simulation and experimental results, the validity of the identification approach is demonstrated. The advantage of the proposed method lies in that the calibration performed with data of one cutting test under a specific regime can be applied for a great range of cutting conditions.     

Simulation and Analysis of Crashworthiness of Fuel Tank for Helicopters

Crashworthiness requirement of fuel tanks is one of the important requirements in helicopter designs. The relations among the protection frame, textile layer and rubber layer of the fuel tank are introduced. Two appropriate FE models are established, one is for an uncovered helicopter fuel tank without protection frame, and the other is for fuel tank with protection frame. The dynamic responses of the two types of fuel tanks impinging on the ground with velocities of 17.3 m/s are numerically simulated for the purpose of analyzing energy-absorbing capabilities of the textile layer and protection frame. The feasibility of the current crashworthiness design of the fuel tank is examined though comparing the dynamic response behaviors of the two fuel tanks.     

Experimental Study on Effects of Fuel Injection on Scramjet Combustor Performance

In order to investigate the effects of fuel injection distribution on the scramjet combustor performance, there are conducted three sets of test on a hydrocarbon fueled direct-connect scramjet test facility. The results of Test A, whose fuel injection is carried out with injectors located on the top-wall and the bottom-wall, show that the fuel injection with an appropriate close-front and centralized distribution would be of much help to optimize combustor performances. The results of Test B, whose fuel injection is performed at the optimal injection locations found in Test A, with a given equivalence ratio and different injection proportions for each injector, show that this injection mode is of little benefit to improve combustor performances. The results of Test C with a circumferential fuel injection distribution displaies the possibility of ameliorating combustor performance. By analyzing the effects of injection location parameters on combustor performances on the base of the data of Test C, it is clear that the injector location has strong coupled influences on combus- tor performances. In addition, an inner-force synthesis specific impulse is used to reduce the errors caused by the disturbance of fuel supply and working state of air heater while assessing combustor performances.     

层次化的网络设计与实现

随着通信技术和计算机技术的发展,网络结构的选择直接影响着网络的运行效率、可靠性和网络安全.层次化网络设计在网络结构设计中比以往使用的非层次化网络设计有着很多优势,也是网络结构的设计趋势.     

时序信号设计的一种新方法

文章结合高速时序工作的特点,从实现的角度提出了一种利用软件调整时序的新方法。在可编程逻辑器件中,利用数字时钟管理器(DCM),通过模块化和增量式设计思想达到对高速时序信号的精确调节。最终实现了一个20MHz速率的时序控制,调节精度达到100ps。     

航天ATS快速测试体系结构研究

快速发射是未来空间信息作战和导弹武器发展面临的新课题,快速测试是快速发射的重要环节。航天ATS快速测试需要遵循一定的体系结构而发展。以国际通用测试系统体系结构为背景,结合我国航天测试的需求,提出了航天ATS快速测试体系结构,分析了航天ATS快速测试的测试流程并行化、关键参数连续监测化和测试数据处理快速化等目标,以及所涉及到的图形化程序开发、仪器可互换等关键技术。结论有利于促进航天ATS快速测试技术的进步,并为其发展提供参考。     

航天器虚拟热试验平台的软件架构及其应用

针对我国目前航天领域型号试验任务重、成本高的特点,文章提出搭建航天器虚拟热试验平台以缩短型号研制周期、减少研发成本。虚拟热试验平台结构拟由5个单独模块组成:试验系统描述及边界条件输入模块,虚拟试验运算模块,模型修正模块,结果报表及经济性分析模块和虚拟试验数据库。另外提出了虚拟热试验平台在航天器真空热试验中的应用。     

利用红外加热笼进行低热流模拟的设计方法研究

在航天器热平衡试验中,散热面区域的低热流密度要求往往难以实现。在以往的试验中,考虑到加热笼覆盖系数对热流密度均匀性的影响,通常选用红外灯阵作为主要的外热流模拟装置。但是红外灯阵体积和热容较大,形状适应性不强,对试验容器空间要求较高。文章利用仿真的手段研究了加热笼的覆盖系数对热流密度均匀性的影响,探讨了利用红外加热笼进行低热流模拟的可行性。     

包带低冲击装置冲击试验及数据分析

文章主要阐述了包带低冲击装置冲击试验的过程及采用的试验技术,并对试验数据进行了处理和分析。通过大量的试验数据,对响应量级与测量点的位置分布、响应与包带预紧力的关系、冲击响应与装药量的关系、冲击响应与起爆器的关系、冲击响应的频率分布关系以及安装方式对试验结果产生的影响作了充分的分析。结果可为研究低冲击装置提供有价值的参考。