CBERS-1卫星IRMSS数据在城市绿地系统规划的应用

文章以CBERS -1卫星长沙幅IRMSS数据作为基础资料 ,利用PCI遥感图像处理软件对数据进行了预处理和应用实验。实验证明CBERS -1卫星的IRMSS数据图像信息丰富 ,可解译程度较高 ,能满足大中城市中等比例尺城市绿地系统规划遥感调查的要求     

电液位置伺服系统的动态试验研究

本文研究了快速响应的电液位置伺服系统动态试验,着重讨论了在实践中如何选择伪随机二位式最大长度序列(PRBS)参数的问陋,并提出快速响应系统PRBS参数选择的原则,使系统辨识精度提高约15％。     

卫星推进及控制装置准直测量方法研究

在传统的卫星推进及控制装置准直测量方法的基础上,提出两种新的测量方法,即小角度准直测量法和三维坐标准直测量法,并给出了相应的数据处理方法。所提出的方法测量精度高、测量速度快,无需转台整平,也不必对转台上的定位销进行精确准直。     

质量矩导弹的神经网络及自适应非线性控制

本文对质量矩控制导弹的动力学方程简化和控制系统的设计进行了研究。详细阐述了所提出的控制方法，介绍了径向基单隐层神经网络进行误差补偿的算法原理，用Lyapunov理论证明了所采用方法的稳定性。在给出了质量矩导弹的六自由度动力学方程和简化后的方程后，用所提出的方法设计控制系统。通过仿真分析，得出了本文所提出的方法具有较好的误差补偿能力的结论。     

一种新型的微机补偿晶体振荡器及开发系统

提出了一种新型的以微处理器为核心的AT切温度补偿晶体振荡器 (MCXO)的设计思想 ,说明了其开发系统的原理 ,给出了最后的实验结果。使用该开发系统得到的这种振荡器可以工作在 - 40℃～ 85℃的环境内 ,频率—温度稳定性≤± 5× 10 - 7。     

飞机主操纵系统疲劳试验载荷谱小操纵位移频次问题研究

针对飞机全机主操纵系统疲劳试验载荷谱中小操纵位移频次影响问题进行了分析和讨论,确定了某机全机主操纵系统小操纵位移频次的级别。同时,在原某机全机主操纵系统疲劳试验载荷谱的基础上再次对其小操纵位移频次进行了计算,去掉了这一级别以下对全机主操纵系统疲劳试验无影响的小操纵位移频次,从而完善了主操纵系统疲劳试验载荷谱。另外,对小操纵位移频次问题研究结果在其全机主操纵系统疲劳试验中的实施效果进行了阐述。     

Digital Aircraft Sheet Metal Part Manufacturing System and Its Key Technology

The architecture of digital sheet metal manufacturing system is proposed based on the classification of sheet metal manufacturing information.The essence of digital manufacturing is the definition,management and transfer of information,and the key technologies are brought forward and described.It is pointed out that knowledge-based manufacturing elements design is necessary to make digital technology efficient.The management of all kinds of sheet metal manufacturing element information is to build single source of manufacturing data.Multi-state model-based digital transfer and coordination method is designed to provide a foundation for digital manufacturing of aircraft sheet metal part.The application of digital sheet metal manufacturing is exemplified with an aircraft sheet metal part.The application result is compared to that of the traditional analog transfer technology.It is shown that the developed technology can improve part quality,shorten manufacturing time and lower manufacturing cost.     

工业远程监控系统实施新方案

近期远程监控系统在工业中逐步推广,针对工业系统的特点和工业网络的实际情况,在原有工业系统的基础上,增加现场设备区域的图像监控和数据传输功能,提出了一种工业远程监控系统实施方案。本文论述了该系统的结构、原理及实现方法,经具体实施证明,本文提出的方案已基本能够满足一个通用的基于公用网络的远程视频监控系统的要求,体现了较重要的理论价值和很强的工程实用价值。     

What Determines the Composition of SEPs in Gradual Events?

Gradual solar energetic particle (SEP) events are evidently accelerated by coronal/interplanetary shocks driven by coronal mass ejections. This talk addresses the different factors which determine the composition of the accelerated ions. The first factor is the set of available seed populations including the solar wind core and suprathermal tail, remnant impulsive events from preceding solar flares, and remnant gradual events. The second factor is the fractionation of the seed ions by the injection process, that is, what fraction of the ions are extracted by the shock to participate in diffusive shock acceleration. Injection is a controversial topic since it depends on the detailed electromagnetic structure of the shock transition and the transport of ions in these structured fields, both of which are not well understood or determined theoretically. The third factor is fractionation during the acceleration process, due to the dependence of ion transport in the turbulent electromagnetic fields adjacent to the shock on the mass/charge ratio. Of crucial importance in the last two factors is the magnetic obliquity of the shock. The form of the proton-excited hydromagnetic wave spectrum is also important. Finally, more subtle effects on ion composition arise from the superposition of ion contributions over the time history of the shock along the observer’s magnetic flux tube, and the sequence of flux tubes sampled by the observer.     

低空突防任务下综合飞行/推进系统的建模与仿真

建立了综合飞行／推进系统的数学模型，介绍了飞机全维非线性数学模型和涡轮风扇发动机非线性部件级数学模型的建模及综合方法。对飞机执行地形中随任务时，飞行员调节飞行速度的方法与基于总能量的调节飞行速度的方法进行了比较。结果表明，基于总能量的方法比飞行员直接控制飞行速度能够减小发动机的燃油消耗，降低发动机的磨损，进而可以增加飞机的航程，延长发动机的使用寿命。