结构随机跳变系统的条件滤波新方法

提出了不完全状态及控制信息的结构随机跳变系统的滤波方法，解决了结构随机跳变系统在控制入与状态的观测互为相关情况下，系统的状态以及不确知的控制输入的最优估计问题。并以线性高斯情况为例进行了数字仿真，证明了该方法的有效性。     

捆绑火箭模态的传递矩阵全耦合算法

本文发展了适用于捆绑火箭的各向耦合自由振动的传递矩阵法，并对捆绑结构的处理难点－捆绑边界条件的处理给出了理论的说明，因而本方法是适用于各种捆绑结构振动模态分析的通用方法，对捆绑火箭１／１０比例模型进行计。算比较表明，传递矩阵法是适合于捆绑结构模态计算的方法。     

Static strength analysis of dragonfly inspired wings for biomimetic micro aerial vehicles

This article examines the suitability of fabricating artificial, dragonfly-like, wing frames from materials that are commonly used in unmanned aircraft(balsa wood, black graphite carbon fiber and red prepreg fiberglass). Wing frames made with Type 321 stainless steel are also examined for comparison. The purpose of these wings is for future use in biomimetic micro aerial vehicles(BMAV). BMAV are a new class of unmanned micro-sized aerial vehicles that mimic flying biological organisms(like flying insects). Insects, such as dragonflies, possess corrugated and complex vein structures that are difficult to mimic. Simplified dragonfly-like wing frames were fabricated from these materials and then a nano-composite film was adhered to them, which mimics the membrane of an actual dragonfly. Finite element analysis simulations were also performed and compared to experimental results. The results showed good agreement(less than 10% difference for all cases).Analysis of these results shows that stainless steel is a poor choice for this wing configuration, primarily because of the aggressive oxidation observed. Steel, as well as balsa wood, also lacks flexibility. In comparison, black graphite carbon fiber and red prepreg fiberglass offer some structural advantages, making them more suitable for consideration in future BMAV applications.     

落儿岭-土地岭断裂几何结构及晚第四纪活动特征初探

落儿岭-土地岭断裂是东大别地区重要的发震构造,然而限于自然地理条件等因素,前人对其的研究并不充分。本文以发生多次中强地震的落儿岭-土地岭断裂为研究对象,在高精度卫星影像解译的基础上,通过详细的野外地质地貌调查,尤其是对典型断层剖面进行分析,研究落儿岭-土地岭断裂的断错地质地貌特征、几何结构及活动特征。通过野外调查并结合其他资料分析认为落儿岭-土地岭断裂为发育于大别造山带内部的一条走向NE、向NW陡倾的断裂带。依据地质地貌特征及地震活动性,断裂可以划分为杨树沟-黑石渡段和黑石渡-横塘岗乡段两个几何段落。断裂最新活动时代为中更新世晚期—晚更新世早期,断裂最新活动继承了中生代以来的运动方式,以兼具右旋走滑的拉张正断为主。     

某型飞机典型结构应力腐蚀开裂原因分析

针对某型飞机典型结构应力腐蚀开裂问题,从材料选用、结构加工、装配工艺、服役环境等角度,结合有限元模拟细节应力分析技术,分析了发生应力腐蚀开裂的原因。基于分析结果,为新飞机制造和现役飞机维修提供相应的建议,为制造厂和维修厂提高飞机结构的应力腐蚀抗性以及结构完整性和航空安全性提供参考。     

NOVEL HIGH-SPEED FPGA-BASED FFT PROCESSOR

A novel architecture for computing the fast Fourier transform ( FFT ) on programmable devices is presented.To improve the system operation speed , a hybrid parallel FFT algorithm is used.Results indicate that the use of an 8×8parallel structure for realizing the 64-point FFT leads to a 8times higher processing speed compared with its counterparts employing other series of techniques.     

Effects of sector structure of the interplanetary magnetic field on the upper mesosphere–lower thermosphere dynamics

In this paper we study the influence of the interplanetary magnetic field (IMF) polarity changes caused by the Earth passing through the IMF sector boundary on the dynamic processes taking place in neutral atmosphere within the altitude interval of the upper mesosphere–lower thermosphere (83–101 km). The analysis has revealed the influence of the IMF sector structure on dynamics of the upper mesosphere–lower thermosphere. There has been a significant seasonal variation of the wind reaction to the IMF polarity changes observed. The influence of the IMF polarity changes on neutral atmosphere dynamics within the altitude range of 83–101 km is most pronounced in the zonal component of neural wind when the IMF polarity changes from negative to positive in all the seasons except for spring and when IMF polarity changes from positive to negative – in spring only.     

地方院校专业设置与产业结构吻合机制研究——以娄底职业技术学院和娄底区域经济为例

从地方性高职院校专业设置和调整应与地方产业结构相吻合进行研究,并就专业与产业结构调整机制中遵循的基本原则以及一些具体调整措施发表研究观点,在此基础上对娄底职院现有专业与娄底区域经济吻合度进行了较深层次的分析,并对娄底职院以后专业建设提出建议。     

一种在理论模线控制下的飞机结构立体图快速画法

绘制飞机结构立体图通常会涉及到飞机外形。由于飞机外形复杂，用传统方法绘制与外形有关的立体图不仅速度慢，而且局限性大。本文介绍一种在理论模线控制下的飞机结构立体图快速画法。     

利用外资优化廊坊地区产业结构的现状及建议

“十一五”规划指出我们要抓住国际产业转移机遇，积极有效利用外资，把利用外资同提升国内产业结构、技术水平结合起来，促进产业结构调整，加快推进工业结构优化升级。本文探讨了外商投资对廊坊地区产业结构的影响。