基于Optimus的涡轮气动优化设计

针对涡轮在理论设计和实际应用中存在的不足,提出了利用多学科优化平台对涡轮进行气动优化设计的方法。首先运用UG／Grip技术对涡轮进行三维造型,然后利用试验设计方法建立计算试验样本点分布表,用商用软件进行各样本点的CFD计算及热-应力耦合分析计算,最后建立响应面模型,对其进行优化设计。结果表明,优化后的涡轮效率比优化前提高5％。该方法为进一步提高涡轮的气动性能,减少损失提供了一定的依据。     

喷丸强化对AISI 420不锈钢固体粒子冲蚀行为的影响

研究了喷丸强化(SP)对AISI 420马氏体不锈钢抗同体粒子冲蚀(SPE)行为的影响.探讨了喷丸引起的表面残余压应力,表面粗糙度增大和表面加工硬化等三因素对SPE抗力的作用机制.结果表明:SP处理对AISI 420不锈钢在30°攻角下的SPE抗力无明显影响,但却降低了该钢在90°攻角下的SPE抗力.SP处理后进行表面抛光,则使该钢在两种攻角下的SPE抗力均得以提高.SP三因素对SPE抗力的作用机制主要有:表面粗糙化增大了试样表面对冲蚀粒子的有效暴露面积,因而降低了不锈钢在两种攻角下的SPE抗力;表面残余压应力能够有效抑制疲劳裂纹萌生和早期扩展,因而能有效提高AISI 420不锈钢的SPE抗力,特别是对90°垂直冲击条件下SPE抗力的提高作用更为明显;表面加工硬化提高了材料表面的微犁削抗力,因而对提高AISI 420钢在30°攻角下的SPE抗力有贡献,但是表面加工硬化层的抗多冲疲劳性能差,却不利于AISI 420钢在90°攻角下抗SPE性能的改善.     

液体圆柱射流破碎过程的实验

采用高速摄像仪对圆柱射流的表面剥离现象和射流破碎长度进行了实验,在低速射流下,分析了Rayleigh模式下主液滴和卫星液滴形成过程及运动规律.随着射流速度的增大,射流表面开始出现了表面剥离小液滴.并发现存在一个临界雷诺数,当超过临界雷诺数时,射流表面出现表面剥离现象.通过对射流中表面剥离现象的实验和分析,给出了两种射流破碎长度随雷诺数变化规律和破碎长度拟合关系式.      

SolidWorks二次开发在燃面计算中的应用

以SolidWorks二次开发接口为基础,探讨了参数化设计在固体火箭发动机装药燃面计算中的应用.通过不同的药柱建模方法实现了固体药柱的装药计算,发展了一种更为简单准确的燃面计算方法.计算结果表明,理论计算和试验结果吻合得较好,能够较好地模拟固体药柱的燃烧过程,可以满足工程计算上的需要,为固体装药的燃面计算提供了新的思路和方法.      

浮力磨粒球性能对工件抛光影响的实验研究

从制作浮力磨粒球材料的性能参数和加工参数入手,综合考虑影响抛光加工的多种因素,应用实验分析方法,研究了磨粒球的直径、磨粒球的层厚和浮力磨粒球抛光工件时的去除量、加工件表面品质的关系.并对抛光工件时浮力磨球的浮力对工件抛光的影响作了分析.     

Morphology and Frictional Characteristics Under Electrical Currents of Al203/Cu Composites Prepared by Internal Oxidation

Two AhO3/Cu composites containing 0.24 wt.% A1203 and 0.60 wt.% A1203 separately are prepared by internal oxidation.Effectsof sliding speed and pressure on the fi-ictional characteristics of the composites and copper against brass are investigated and compared.The changes in morphology of the sliding surface and subsurface are examined with scanning electron microscope (SEM) and energy dispersive X-ray spectrum (EDS).The results show that the wear resistance of the AI203/Cu composites is superior to that of copperunder the same conditions.Under a given electrical current,the wear rate of AI203/Cu composites decreases as the AleO3-content increases.However,the wear rates of the Al203/Cu composites and copper increase as the sliding speed and pressure increase under drysliding condition.The main wear mechanisms for AleO3/Cu composites are of abrasion and adhesion;for copper,it is adhesion,although wear by oxidation and electrical erosion can also be observed as the speed and pressure rise.     

Rapid local ionosphere modeling based on Precise Point Positioning over Iran: A case study under 2014 solar maximum

Presently, the ionosphere effect is the main source of the error in the Global Positioning System (GPS) observations. This effect can largely be removed by using the two-frequency measurements, while to obtain the reasonable results in the single-frequency applications, an accurate ionosphere model is required. Since the global ionosphere models do not meet our needs everywhere, the local ionosphere models are developed. In this paper, a rapid local ionosphere model over Iran is presented. For this purpose, the GPS observations obtained from 40 GPS stations of the Iranian Permanent GPS Network (IPGN) and 16 other GPS stations around Iran have been used. The observations have been selected under 2014 solar maximum, from the days 058, 107, 188 and 271 of the year 2014 with different geomagnetic activities. Moreover, ionospheric observables based on the precise point positioning (PPP) have been applied to model the ionosphere. To represent our ionosphere model, the B-spline basis functions have been employed and the variance component estimation (VCE) method has been used to regularize the problem.To show the efficiency our PPP-derived local ionosphere model with respect to the International GNSS Service (IGS) global models, these models are applied on the single point positioning using single-frequency observations and their results are compared with the precise coordinates obtained from the double-differenced solution using dual-frequency observations. The results show that the 95th percentile of horizontal and vertical positioning errors of the single-frequency point positioning are about 3.1 and 13.6?m, respectively, when any ionosphere model are not applied. These values significantly improve when the ionosphere models are applied in the solutions. Applying CODE’s Rapid Global ionosphere map (CORG), improvements of 59% and 81% in horizontal and vertical components are observed. These values for the IGS Global ionosphere map (IGSG) are 70% and 82%, respectively. The best results are obtained from our local ionosphere model, where 84% and 87% improvements in horizontal and vertical components are observed. These results confirm the efficiency of our local ionosphere model over Iran with respect to the global models. As a by-product, the Differential Code Biases (DCBs) of the receivers are also estimated. In this line, we found that the intra-day variations of the receiver DCBs could be significant. Therefore, these variations must be taken into account for the precise ionosphere modeling.     

An adaptive integration surface for predicting transonic rotor noise in hovering and forward flights

In this paper, a new permeable adaptive integration surface is developed in order to evaluate transonic rotor noise in accordance with FW-H_pds equations(Ffowcs Williams-Hawkings equations with penetrable data surface). Firstly, a nonlinear near-field solution is computed on the basis of Navier-Stokes equations, which is developed on moving-embedded grid methodology.The solution calculated through the present CFD method is used as the input for acoustic calculations by FW-H_pds equations. Then, two criteria for constructing integration surfaces are established based on the analysis of the quadrupole source strength and the nonlinear characteristic.A new surface is determined adaptively by the pressure gradient or density in a given flowfield,eschewing the uncertainties associated with determining cylinder-shaped integration surfaces. For varying hover cases, transonic noises are simulated with new integration surfaces for a UH-1 model rotor. Furthermore, numerical results of the new integration surface derived from the density perturbation value conform better to experimental data than results derived from the pressure gradient.Finally, the integration surface given by jrqj being 0.1, which is an applicable criterion obtained from hover cases, is used to predict transonic rotor noise in forward flight. The computational accuracy of the new integration surface method has been validated in predicting transonic rotor noise of an AH-1 model rotor at different advance ratios.     

超薄层C—N共渗研究

用自行研制伯低真空化学热处理多用炉进行低真空脉冲式碳－氮共渗试验。研究渗剂组成及配比、工作压力、脉冲工艺周期、共渗温度与时间对渗层特性的影响。研究结果表明，在适当的工艺条件下，低真空脉冲式碳一氮共渗工艺能满足机械零件表面硬化层深度０．１－－０．３ｍｍ，硬度≥５８ＨＲＣ的要求。     

三维曲面测量新方法：半球头测量法

提出的半球头测量法从理论上消除了三维曲面截形测量时由于被测曲面的扭曲对测头所造成的干涉,使曲面测量直接转化为曲线测量,从而简化了测量和数据处理过程,为曲面测量提供了一种既简便实用又具有较高精度的新方法。