Multiband echo tomography of Sco X-1

We present preliminary results of a simultaneous X-ray/optical campaign of the prototypical LMXB Sco X-1 at 1–10 Hz time resolution. Lightcurves of the high excitation Bowen/HeII emission lines and a red continuum at λ_c  6000 Å were obtained through narrow interference filters with ULTRACAM, and these were cross-correlated with simultaneous RXTE X-ray lightcurves. We find evidence for correlated variability, in particular when Sco X-1 enters the Flaring branch. The Bowen/HeII lightcurves lag the X-ray lightcurves with a light travel time which is consistent with reprocessing in the companion star while the continuum lightcurves have shorter delays consistent with reprocessing in the accretion disc.     

正态-复合非时齐Poisson过程模型结构可靠性当量正态设计

讨论强度R～N（μ_R，_R），应力｛S（t），t∈［0，T］｝为非时齐Poisson过程模型结构可靠性当量正态设计。获得应力在设计基准期［0，T］内的最大值概率分布及统计参数估计；正态－复合非时齐Poisson过程模型结构可靠度及结构可靠性当量正态设计表达式。     

战术导弹控制系统滚动回路的一种设计方法

结合近程战术地地导弹控制系统滚动回路的设计，讨论了整个设计过程中的设计思路和设计方法。针对导弹的弹体滚动运动参数在较大范围内变化的特点，将回路校正网络设计为变参数校正网络。设计中，使用ＩＥＡＳ语言编程对滚动回路单通道和控制回路三通道进行计算机仿真，经多次协调设计，结果令人满意。给出了部分仿真结果。     

P1─—多面体的对偶图形的性质

本文研究了P1─—多面体与其对偶图形的对偶图形边长之间的关系问题．设P1─—多面体的边长为a，其对偶图形的对偶图形的边长为C，则其中θ1为多面体A的过顶点的相邻两校之间的夹角，θ2为多面体B的过顶点的相邻两校之间的夹角，取θ＝max｛θ1，θ1｝     

Computational engineering analysis of external geometrical modifications on MQ-1 unmanned combat aerial vehicle

This paper focuses on the effects of external geometrical modifications on the aerodynamic characteristics of the MQ-1 predator Unmanned Combat Aerial Vehicle (UCAV) using computational fluid dynamics. The investigations are performed for 16 flight conditions at an altitude of 7.6 km and at a constant speed of 56.32 m/s. Two models are analysed, namely the baseline model and the model with external geometrical modifications installed on it. Both the models are investigated for various angles of attack from −4° to 16°, angles of bank from 0° to 6° and angles of yaw from 0° to 4°. Due to the unavailability of any experimental (wind tunnel or flight test) data for this UCAV in the literature, a thorough verification of calculations process is presented to demonstrate confidence level in the numerical simulations. The analysis quantifies the loss of lift and increase in drag for the modified version of the MQ-1 predator UCAV along with the identification of stall conditions. Local improvement (in drag) of up to 96% has been obtained by relocating external modifications, whereas global drag force reduction of roughly 0.5% is observed. The effects of external geometrical modifications on the control surfaces indicate the blanking phenomenon and reduction in forces on the control surfaces that can reduce the aerodynamic performance of the UCAV.     

螺旋桨桨叶1P气动载荷研究

介绍了一种１Ｐ载荷实验研究方法－桨叶应变测试法,首先通过桨叶剖面速度三角形及气动力分析给出了１Ｐ载荷与测量应变的关系,然后通过地面试验和飞行试验进行了验证。试验结果表明,螺旋桨１Ｐ载荷主要由于非对称气流流过桨盘面改变了桨叶剖面速度三角形而引起,迎角,侧滑角的增加,会产生较大的１Ｐ载荷;机动飞行,如快速拉杆,荷兰滚等也会产生较大的１Ｐ载荷。     

猎鹰9号火箭发射及箭体复用的分析

猎鹰9号火箭截至2023年年底已完成286次发射。对猎鹰9号火箭特别是Block5版本火箭的发射情况进行了完整梳理统计,重点分析了一级箭体的复用情况以及发射、回收的相关能力保障,对火箭的经济性和未来前景作了预测。     

7075Al/SiCp复合材料热压缩变形的研究

采用圆柱试样在Gleeble-1500热模拟机上对7075Al／SiCp复合材料进行高温压缩变形实验，变形温度为300-500℃，应变速率为0．001-1s^-1。结果表明：7075Al／SiCp复合材料的流变应力大小受变形温度和应变速率的强烈影响，流变应力随应变的增加而逐渐增加，出现一峰值后逐渐下降；流变应力随变形温度的升高，应变速率的降低而降低。可用Zener—Hollomon参数的双曲正弦形式来描述7075Al／SiCp复合材料高温压缩变形流变应力，其变形激活能Q为279．659KJ/mol。     

1,5-二氨基四唑含能配合物的制备、表征及其催化性能研究

合成出2种以1,5-二氨基四唑(DAT)为配体,苦味酸根为外界,钴和铜为中心离子的含能配合物,并对其结构进行了表征.运用示差扫描热分析(DSC)方法,就目标化合物对高氯酸铵(AP)、奥克托金(HMX)和六硝基六氮杂异伍兹烷(HNIW)热分解的影响进行了研究.利用电荷耦合器件(CCD)燃速测定系统,研究了目标化合物对缩水...     

一种基于频移补偿的apFFT相位估计改进方法及应用

全相位快速傅里叶变换（all phase Fast Fourier Transform,apFFT)相位一致性特点使正弦信号相位估计不受频率估计影响,但由于频谱泄露和栅栏效应,apFFT相位估计性能受信号频率位置影响。针对该问题,提出了一种基于高精度频率估计和补偿的apFFT相位估计方法。首先,对信号进行高精度频率估计,并以此对信号进行频移补偿,然后对补偿信号进行apFFT,最后求解信号相位。蒙特卡洛仿真结果表明：所提算法的相位估计性能不受信号频率位置影响,相位估计误差性能与理论值一致,受两参数克拉美罗界（CRLB₂）约束,约为1.158 2倍的CRLB₂;相位估计性能和抗噪声能力明显优于经典apFFT算法和其他对比算法。更进一步,利用我国首次火星探测器TW-1（天问一号）近火捕获段干涉测量数据进行算法验证,结果表明：相位估计精度约4 mrad,干涉测量时延估计精度约50 ps。