Influence of Gd2O3 and Yb2O3 Co-doping on Phase Stability,Thermo-physical Properties and Sintering of 8YSZ

The role of multicomponent rare earth oxides in phase stability, thermophysical properties and sintering for ZrO2-based thermal barrier coatings (TBCs) materials is investigated. 8YSZ codoped with 3 mol% Gd2O3 and 3 mol% Yb2O3 (GYb-YSZ) powders are synthesized by solid state reaction for 24 h at various temperatures. As temperature increases, stabilizers are dissolved into zirconia matrix gradually. Synthesized at 1 500 °C, GYb-YSZ is basically composed of cubic phase. GYb-YSZ exhibits excellent phase stability and sinters lower than 8YSZ by nearly three times. The thermal conductivity of GYb-YSZ is much lower than that of 8YSZ, and the thermal expansion coefficient of GYb-YSZ is comparable to that of 8YSZ. The influence of Gd2O3 and Yb2O3 co-doping on phase stability, thermal conductivity and sintering of 8YSZ is discussed.     

Sm2Zr2O7基热障涂层材料研究现状

由于航空发动机不断向高效率、高推重比方向发展,发动机热端部件表面热障涂层的服役条件也越来越苛刻。稀土锆酸盐作为新型热障涂层材料,其开发和应用受到越来越多国内外学者的关注。Sm₂Zr₂O₇材料在一系列稀土锆酸盐中具有烧绿石结构稳定、低热导率和高热膨胀系数等优点,具有良好的应用前景。为满足热障涂层更高的服役要求,Sm₂Zr₂O₇的掺杂改性及性能研究也成为了研究热点。首先,对热障涂层材料进行了简要概述,然后就Sm₂Zr₂O₇基陶瓷材料及其涂层的晶体结构、热物理性能、力学性能以及抗腐蚀性能等的研究进展进行了详细的介绍,为该材料在热障涂层领域的研究及应用提供参考。     

低能质子对卫星热控涂层太阳吸收率的影响

空间低能质子由于沉积能量在表层对卫星外露热控涂层太阳吸收率参数有较大影响,文章首次对地球同步轨道卫星6种热控涂层进行低能质子辐照试验研究,试件是S781有机白漆、SR107-ZK有机白漆、ACR-1有机白漆、OSR二次表面镜、F46二次表面镜和Kapton二次表面镜。试验采用能量48keV的质子,在真空条件下累积辐照360h,累计注量达到2×10~(15)p/cm~2。在辐照过程中原位测量热控涂层的太阳吸收率参数。这些热控涂层的太阳吸收率参数都有不同程度的明显上升。其中,有机白漆类热控涂层的太阳吸收率参数上升最快,其次是塑料薄膜类热控涂层(F46二次表面镜和Kapton二次表面镜),最稳定的是玻璃类热控涂层(OSR二次表面镜)。对试验前后试件的SEM分析和XPS分析表明,热控涂层中的颜料结构和聚合物结构在辐照下发生变化,形成不饱和链发色团和色心,使原来透明聚合物和高反射的颜料对太阳光产生吸收,从而引起热控涂层太阳吸收率参数上升。     

红外涂层的辐射热转移和选择性辐射

本文通过辐射热转移理论对热基质平面涂层的光谱辐射进行厂分析,并给出了在限定厚度范围内,该涂层光谱辐射的一般方程。由此可以判定在不同基质上,当涂层达到热力学平衡时,其红外辐射是属于黑体辐射或选择性辐射体系。本文同时还讨论了涂层厚度、涂层材料及不同基质性质对红外辐射特性的影响。     

绝缘层厚度对孔电解加工稳定性和精度的影响

通过对孔电解加工中加工间隙的电场和流场仿真,研究了电极绝缘层的涂覆尺寸特征对小孔加工性能的影响.进行了管电极电解小孔的试验,得到了理想的绝缘层厚度参数.试验和仿真均表明, 增大绝缘层厚度可以减小孔的侧面腐蚀面,并使孔圆度有所增加,同时提高了加工过程的稳定性,但过大的涂覆厚度易出现打火甚至加工短路.     

环氧类韧性耐烧蚀防热涂层的研制与表征

针对现有环氧类防热涂层韧性差、不耐烧蚀的缺点,设计了一种环氧类防热涂层--TR-48.测试了其基本性能及3-5个批次的典型性能,并与国外现有涂层进行了比较.结果证明:TR-48具有韧性好、强度高、耐烧蚀等特点;其中扭伸强度为8.7-11.2 MPa,伸长率为6.8%-12.2%,TG分析800℃残碳率为51%,800℃马弗炉烧蚀5 min残碳率为38%-47%.利用SEM、DSC表征了涂层的烧蚀过程,发现600-800℃存在烧结反应.利用液氧/煤油发动机和电弧风洞考核试验考核了涂层在高温、高速气流环境下的表现,结果表明该涂层具有较好的抗冲刷及防热性能.     

封严涂层的性能评价及研究进展

封严涂层系统可以改善飞机燃气涡轮发动机中旋转部件和固定部件之间的密封性,已成为提高发动机工作效率．延长发动机服役寿命的主要方法之一。本文阐述了目前封严涂层的应用及性能评价的研究进展．描述了未来封严涂层的发展趋势。     

High-entropy (La0.2Nd0.2Sm0.2Gd0.2Yb0.2)2(Zr0.75Ce0.25)2O7 thermal barrier coating material with significantly enhanced fracture toughness

Poor fracture toughness leads to premature failure of La₂(Zr_0.75Ce_0.25)₂O₇ (LCZ) thermal barrier coatings in an elevated temperature service environment. A novel coating material, namely (La_0.2Nd_0.2Sm_0.2Gd_0.2Yb_0.2)₂(Zr_0.75Ce_0.25)₂O₇ (LNSGY) based on the high-entropy concept, was successfully fabricated by solid-state sintering. The microstructure of LCZ and LNSGY was investigated by X-Ray Diffraction (XRD), Raman Spectrometer (RS), Transmission Electronic Microscopy (TEM) and Scanning Electron Microscopy (SEM). The fracture toughness of the LCZ and LNSGY ceramics was evaluated. The LNSGY has excellent high-temperature phase stability, and the grain size of LNSGY ceramic is smaller than that of LCZ ceramic at an elevated temperature due to the sluggish diffusion effect. Compared with LCZ (fracture toughness is (1.4 ± 0.1) MPa∙m^1/2), the fracture toughness of LNSGY is significantly enhanced (fracture toughness is (2.0 ± 0.3) MPa∙m^1/2). Therefore, the LNSGY can be a promising advanced thermal barrier coating material in the future.     

Low-temperature Formation of Aluminide Coatings on Ni-base Superalloys by Pack Cementation Process

This article investigates the low-temperature formation of aluminide coatings on a Ni-base superalloy by pack cementation process. The pack cemented coatings characteristic of high density and homogeneity possess a two-layer structure. The top layer mainly consists of Al₃Ni₂ and Al₃Ni, while the bottom layer of Al₃Ni₂. Great efforts are made to elucidate the effects of different experimental parameters on the microstructure and the constituent distribution of the coatings. The results show that all the parameters exclusive of the pack activator (NH₄Cl) content produce effect on the coating thickness, but do not on the microstructure and the constituent distribution. The pack activator (NH₄Cl) content affects neither the coating thickness nor structure and constituent distribution. The parabolic relationship between the coating thickness and the deposition time suggests that the process is diffusion-controlled. Furthermore, the article demonstrates a linear relationship between the coating thickness and the reciprocal deposition temperature.     

换热系数对热机耦合作用下热障涂层性能的影响

通过有限元计算分析了热机耦合作用下的热障涂层不同的内壁换热系数对涂层系统隔热效果和应力分布的影响,为选择合适的内壁换热系数提供了参考作用.计算结果表明:随着内壁换热系数的增加模型中的温度随之降低,内外壁的温差以非线性曲线的形式增加;在热氧化生成层附近产生了较大的应力,并且主应力值随着换热系数的增加而增大.