热控涂层表面电阻率原位测量方法研究

表面电阻率是航天器热控涂层的重要参数之一。由于航天器所在环境的特殊性,需要对其热控涂层的表面电阻率进行原位测量。文章提出了一种表面电阻率的原位测量方法,即使用导电银胶粘结铜箔电极和样片,并通过弹性钢丝压线把两电极接入测量电路。通过以ITO/Kapton/Al和S781白漆为试验对象的测量,验证了该测量方法的可行性,并对测量结果的影响因素进行了分析。     

环氧类韧性耐烧蚀防热涂层的研制与表征

针对现有环氧类防热涂层韧性差、不耐烧蚀的缺点,设计了一种环氧类防热涂层--TR-48.测试了其基本性能及3-5个批次的典型性能,并与国外现有涂层进行了比较.结果证明:TR-48具有韧性好、强度高、耐烧蚀等特点;其中扭伸强度为8.7-11.2 MPa,伸长率为6.8%-12.2%,TG分析800℃残碳率为51%,800℃马弗炉烧蚀5 min残碳率为38%-47%.利用SEM、DSC表征了涂层的烧蚀过程,发现600-800℃存在烧结反应.利用液氧/煤油发动机和电弧风洞考核试验考核了涂层在高温、高速气流环境下的表现,结果表明该涂层具有较好的抗冲刷及防热性能.     

封严涂层的性能评价及研究进展

封严涂层系统可以改善飞机燃气涡轮发动机中旋转部件和固定部件之间的密封性,已成为提高发动机工作效率．延长发动机服役寿命的主要方法之一。本文阐述了目前封严涂层的应用及性能评价的研究进展．描述了未来封严涂层的发展趋势。     

High-entropy (La0.2Nd0.2Sm0.2Gd0.2Yb0.2)2(Zr0.75Ce0.25)2O7 thermal barrier coating material with significantly enhanced fracture toughness

Poor fracture toughness leads to premature failure of La₂(Zr_0.75Ce_0.25)₂O₇ (LCZ) thermal barrier coatings in an elevated temperature service environment. A novel coating material, namely (La_0.2Nd_0.2Sm_0.2Gd_0.2Yb_0.2)₂(Zr_0.75Ce_0.25)₂O₇ (LNSGY) based on the high-entropy concept, was successfully fabricated by solid-state sintering. The microstructure of LCZ and LNSGY was investigated by X-Ray Diffraction (XRD), Raman Spectrometer (RS), Transmission Electronic Microscopy (TEM) and Scanning Electron Microscopy (SEM). The fracture toughness of the LCZ and LNSGY ceramics was evaluated. The LNSGY has excellent high-temperature phase stability, and the grain size of LNSGY ceramic is smaller than that of LCZ ceramic at an elevated temperature due to the sluggish diffusion effect. Compared with LCZ (fracture toughness is (1.4 ± 0.1) MPa∙m^1/2), the fracture toughness of LNSGY is significantly enhanced (fracture toughness is (2.0 ± 0.3) MPa∙m^1/2). Therefore, the LNSGY can be a promising advanced thermal barrier coating material in the future.     

Low-temperature Formation of Aluminide Coatings on Ni-base Superalloys by Pack Cementation Process

This article investigates the low-temperature formation of aluminide coatings on a Ni-base superalloy by pack cementation process. The pack cemented coatings characteristic of high density and homogeneity possess a two-layer structure. The top layer mainly consists of Al₃Ni₂ and Al₃Ni, while the bottom layer of Al₃Ni₂. Great efforts are made to elucidate the effects of different experimental parameters on the microstructure and the constituent distribution of the coatings. The results show that all the parameters exclusive of the pack activator (NH₄Cl) content produce effect on the coating thickness, but do not on the microstructure and the constituent distribution. The pack activator (NH₄Cl) content affects neither the coating thickness nor structure and constituent distribution. The parabolic relationship between the coating thickness and the deposition time suggests that the process is diffusion-controlled. Furthermore, the article demonstrates a linear relationship between the coating thickness and the reciprocal deposition temperature.     

热障涂层残余应力的拉曼光谱测量及数值分析

 为了研究航空发动机热障涂层(TBCs)制备过程中残余应力的分布问题,采用大气等离子喷涂技术(APS)在镍基高温合金GH99上制备了热障涂层(CoCrAlY粘结层和ZrO₂陶瓷面层),对热障涂层进行了100~3 500 cm^-1激光拉曼光谱扫描,并采用有限元方法计算了与之对应的热障涂层有限元模型应力分布.分析了涂层系统内部轴向残余应力的分布情况并对比分析了激光拉曼光谱频移及有限元计算结果.激光拉曼分析结果表明:轴向陶瓷层内部呈现压应力,在陶瓷层/粘结层界面处应力达到最大值14.8 MPa,粘结层内呈现拉应力;数值分析应力变化趋势与激光拉曼测试分析结果相吻合.     

Influence of Gd2O3 and Yb2O3 Co-doping on Phase Stability,Thermo-physical Properties and Sintering of 8YSZ

The role of multicomponent rare earth oxides in phase stability, thermophysical properties and sintering for ZrO2-based thermal barrier coatings (TBCs) materials is investigated. 8YSZ codoped with 3 mol% Gd2O3 and 3 mol% Yb2O3 (GYb-YSZ) powders are synthesized by solid state reaction for 24 h at various temperatures. As temperature increases, stabilizers are dissolved into zirconia matrix gradually. Synthesized at 1 500 °C, GYb-YSZ is basically composed of cubic phase. GYb-YSZ exhibits excellent phase stability and sinters lower than 8YSZ by nearly three times. The thermal conductivity of GYb-YSZ is much lower than that of 8YSZ, and the thermal expansion coefficient of GYb-YSZ is comparable to that of 8YSZ. The influence of Gd2O3 and Yb2O3 co-doping on phase stability, thermal conductivity and sintering of 8YSZ is discussed.     

绝缘层厚度对孔电解加工稳定性和精度的影响

通过对孔电解加工中加工间隙的电场和流场仿真,研究了电极绝缘层的涂覆尺寸特征对小孔加工性能的影响.进行了管电极电解小孔的试验,得到了理想的绝缘层厚度参数.试验和仿真均表明, 增大绝缘层厚度可以减小孔的侧面腐蚀面,并使孔圆度有所增加,同时提高了加工过程的稳定性,但过大的涂覆厚度易出现打火甚至加工短路.     

反应等离子喷涂Fe-Ti-C复合粉末制备金属陶瓷涂层的组织形成机理

以蔗糖为碳的前驱体、TiFe粉为原料制备Fe-Ti-C系反应热喷涂复合粉末,通过等离子喷涂沉积TiC/Fe金属陶瓷涂层,利用"淬熄试验"研究涂层组织形成机理.采用XRD和SEM分析喷涂粉末、涂层以及淬熄粒子的组织结构.结果表明:每个复合粉末团粒构成独立的反应单元,在喷涂飞行过程中首先出现Ti-Fe液相,然后整个团粒发生球化;熔化的团粒内部生成大量细小TiC颗粒,表层有少量TiC聚集,与基板碰撞后形成复合强化片层与TiC聚集片层交替叠加的涂层结构;随飞行距离增大,团粒外部TiC聚集层增厚,内部TiC颗粒减少,碰撞扁平化程度降低;最终涂层由TiC和Fe两相组成,大量亚微米级TiC颗粒呈内晶型均匀分布于Fe基体中.     

红外涂层的辐射热转移和选择性辐射

本文通过辐射热转移理论对热基质平面涂层的光谱辐射进行厂分析,并给出了在限定厚度范围内,该涂层光谱辐射的一般方程。由此可以判定在不同基质上,当涂层达到热力学平衡时,其红外辐射是属于黑体辐射或选择性辐射体系。本文同时还讨论了涂层厚度、涂层材料及不同基质性质对红外辐射特性的影响。