卫星电源系统的母线性能分析

建立以母线为核心的分流器,蓄电池充电调节器（ＢＣＲ）,蓄电池放电调节器（ＢＤＲ）和太阳阵的交流小信号模型;导出母线动态阻抗、稳定性、瞬态响应和纹波的分析法,并利用该方法举例分析了革一电源系统的性能。此外,还利用Ｐｏｗｅｒ Ｓｉｍｕｌａｔｉｏｎ（ＰＳＩＭ）电源系统仿真软件对该电源系统进行了仿真,验证了理论分析方法的正确性。     

固态功率控制器带容能力分析方法研究

以高压直流固态功率控制器为研究对象,从热的角度分析其所能开通的最大容性负载,利用Saber软件建立功率管的瞬态热路模型,通过热仿真得出固态功率控制器开通过程中的温度变化,从而准确得出其在不同控制环境下所能开通的最大容性负载。     

150座级商用发动机控制技术对比分析

主要对现役150座级商用发动机CFM56-5B、CFM56-7B、V2500以及下一代150座级商用发动机LEAP X、GTF的控制技术进行初步分析,包括对FADEC系统组成、燃油系统、各项控制技术及超转保护的分析,并对现役及下一代150座级商用发动机控制技术进行对比分析,初步分析出其各项技术的差异,最后给出分析结论并...     

飞机电源GCU BITE系统研究

主要研究了飞机电源系统发电机控制器BITE的设计,着重对发电机控制器BITE系统进行了详细的分析.同时还介绍了飞机电源系统的故障检测和隔离.该BITE使工作人员能根据指示信息快速更换LRU部件或对故障部件能准确的定位,极大的减少了故障排除所花费的时间,提高了工作效率.     

汽轮机数字电液控制系统在大型火电机组中的应用

丰城电厂4×300MW单元机组汽机控制采用了以WDPF集散系统为基础而构成的汽轮机数字电液控制系统(DEH-Ⅲ)。以DEH-Ⅲ为例对数字电液系统的组成、系统功能、运行方式和保护控制进行了介绍。     

用于长期监测的高可靠供配电技术

针对液体运载火箭加注推进剂后长期贮存期间对箭上参数实时监测的需求,设计了一种能够长期稳定监测箭上参数的高可靠供配电系统,基于自主可控嵌入式实时操作系统和国产处理器开发了应用软件,提高了监测可靠性。考虑到长期加电期间可能出现单机故障,进行了冗余热备设计,并且能够在系统不断电的情况下更换故障设备,提高了系统可靠性。目前该设计已经过工程研制验证,得到成功应用。     

Evaluation of airborne data link communication

An experimental prototype of a cockpit data link communication interface (modified Navigation Display (ND) and Multi-purpose Control and Display Unit (MCDU)) was developed and tested in an Airbus A340 Full Flight Simulator. 8 crews (16 professional pilots) performed simulator flights in a mixed voice and data link scenario. After each experiment video recordings were presented to the pilots and they were asked to estimate subjective strain (NASA task load index) and situational aspects retrospectively. Results show an increase in subjective strain and a decrease of ‘feeling of sovereignty’ and situation awareness under data link conditions. The effect is similar to the one caused by higher workload.     

A novel approach of testability modeling and analysis for PHM systems based on failure evolution mechanism

Prognostics and health management (PHM) significantly improves system availability and reliability, and reduces the cost of system operations. Design for testability (DFT) developed concurrently with system design is an important way to improve PHM capability. Testability modeling and analysis are the foundation of DFT. This paper proposes a novel approach of testability modeling and analysis based on failure evolution mechanisms. At the component level, the fault progression-related information of each unit under test (UUT) in a system is obtained by means of failure modes, evolution mechanisms, effects and criticality analysis (FMEMECA), and then the failure-symptom dependency can be generated. At the system level, the dynamic attributes of UUTs are assigned by using the bond graph methodology, and then the symptom-test dependency can be obtained by means of the functional flow method. Based on the failure-symptom and symptom-test dependencies, testability analysis for PHM systems can be realized. A shunt motor is used to verify the application of the approach proposed in this paper. Experimental results show that this approach is able to be applied to testability modeling and analysis for PHM systems very well, and the analysis results can provide a guide for engineers to design for testability in order to improve PHM performance.