关于LTN—72R惯性导航系统定位的几个问题

LTN-72R 惯性导航系统是一个高可靠性、全天候、全球惯导系统。它可单套惯导系统工作,也可作三重位置混合系统工作。惯性即时位置可以使用无线电测距和全向信标导航装置自动更新。本文介绍单套惯导系统、三重位置混合、自动无线电位置更新的基本原理和方法。     

用于被动寻的导弹的带末端落角约束的变结构导引律

使被动寻的导弹在较低的平飞弹道情况下，以较小的俯冲过载和最佳攻击姿态精确命中目标；采用带落角约束的变结构导引律，对弹目距离及距离变化率进行估计，克服被动寻的导弹不能测距的约束，同时使切换开关增益随时间自适应变化以减小俯冲过载；利用某型在研被动寻的导弹的气动参数，对此变结构导引律进行了数学仿真，仿真结果表明，在较低的平飞弹道约束条件下及过载要求范围内，该导引律能以期望落角命中静止与机动的坦克目标，对弹目距离变化率及距离的较大估计误差具有较强的鲁棒性。     

基于多传感器信息融合的自主移动机器人导航算法研究

本文介绍了一种基于微控制器控制，以GPS为主要导航手段，且基于多传感器信息融合的自主移动机器人导航系统的软硬件设计思想及实现方法。重点讨论了基于栅格法的导航算法在微控制器系统中的实现。最后给出了该导航系统在比较典型的环境中实现导航与避障的实验结果。     

基于联邦滤波器的新型故障检测结构及算法

提出了一种基于联邦卡尔曼滤波器的故障检测结构,该结构利用各局部滤波器和参考滤波器共有状态之间的残差进行故障检测.并提出了2种故障检测算法:χ2检验法和Elman神经网络检验法.以组合导航系统为例进行了仿真研究,和其它算法相比该算法计算简单、可靠,不但可以快速检测出外部传感器及参考系统故障,且具有很好的容错性能,能快速检测出故障并进行隔离,使融合后系统依然保持较高精度.     

Precise line-of-sight modelling for angles-only relative navigation

This work presents a precise analytical model to reconstruct the line-of-sight vector to a target satellite over time, as required by angles-only relative navigation systems for application to rendezvous missions. The model includes the effects of the geopotential, featuring: the analytical propagation in the mean relative orbital elements (up to second-order expansion), the analytical two-way osculating/mean orbital elements’ conversion (second-order in $J_2$ and up to a given degree and order of the geopotential), and a second-order mapping from the perturbed osculating elements’ set to the local orbital frame. Performances are assessed against the line-of-sight reconstructed out of the precise GPS-based positioning products of the PRISMA mission. The line-of-sight modelled over a far-range one day long scenario can be fitted against the true one presenting residuals of the order of ten arc-seconds, which is below the typical sensor noise at far-range.     

A fast pulse phase estimation method for X-ray pulsar signals based on epoch folding

X-ray pulsar-based navigation (XPNAV) is an attractive method for autonomous deep-space navigation in the future. The pulse phase estimation is a key task in XPNAV and its accuracy directly determines the navigation accuracy. State-of-the-art pulse phase estimation techniques either suffer from poor estimation accuracy, or involve the maximization of generally non-convex object function, thus resulting in a large computational cost. In this paper, a fast pulse phase estimation method based on epoch folding is presented. The statistical properties of the observed profile obtained through epoch folding are developed. Based on this, we recognize the joint prob-ability distribution of the observed profile as the likelihood function and utilize a fast Fourier transform-based procedure to estimate the pulse phase. Computational complexity of the proposed estimator is analyzed as well. Experimental results show that the proposed estimator significantly outperforms the currently used cross-correlation (CC) and nonlinear least squares (NLS) estima-tors, while significantly reduces the computational complexity compared with NLS and maximum likelihood (ML) estimators.     

Evaluation and improvement of coastal GNSS reflectometry sea level variations from existing GNSS stations in Taiwan

Global sea level rise due to an increasingly warmer climate has begun to induce hazards, adversely affecting the lives and properties of people residing in low-lying coastal regions and islands. Therefore, it is important to monitor and understand variations in coastal sea level covering offshore regions. Signal-to-noise ratio (SNR) data of Global Navigation Satellite System (GNSS) have been successfully used to robustly derive sea level heights (SLHs). In Taiwan, there are a number of continuously operating GNSS stations, not originally installed for sea level monitoring. They were established in harbors or near coastal regions for monitoring land motion. This study utilizes existing SNR data from three GNSS stations (Kaohsiung, Suao, and TaiCOAST) in Taiwan to compute SLHs with two methods, namely, Lomb–Scargle Periodogram (LSP)-only, and LSP aided with tidal harmonic analysis developed in this study. The results of both methods are compared with co-located or nearby tide gauge records. Due to the poor quality of SNR data, the worst accuracy of SLHs derived from traditional LSP-only method exceeds 1?m at the TaiCOAST station. With our procedure, the standard deviations (STDs) of difference between GNSS-derived SLHs and tide gauge records in Kaohsiung and Suao stations decreased to 10?cm and the results show excellent agreement with tide gauge derived relative sea level records, with STD of differences of 7?cm and correlation coefficient of 0.96. In addition, the absolute GNSS-R sea level trend in Kaohsiung during 2006–2011 agrees well with that derived from satellite altimetry. We conclude that the coastal GNSS stations in Taiwan have the potential of monitoring absolute coastal sea level change accurately when our proposed methodology is used.     

自动导引车在工业4.0 中的应用

随着工业4.0概念的逐步成熟,智能化工厂、智能化生产以及智能化物流将是未来很长一段时间的发展模式,传统的制造企业会面临智能化的升级和转型.在此背景下,从提高工业化生产自动化程度的角度入手,在生产流水线中引入自动导引车.然后针对每一种导航方式分析其优缺点,并且结合现代化生产方式的特点,通过对具体的应用案例进行分析,从原理上重点阐述了激光导引的情况,同时分析了自动导引车(AGV)的发展趋势,为企业后续在选择适合自身特点的自动导引车方面提供了参考.     

基于卫星和星敏感器的冗余激光惯组在轨标定

采用高精度卫星导航速度、位置信息以及星敏感器提供的姿态信息设计十表冗余捷联惯组的标定模型,包含陀螺和加速度计的零次项和标度因数,对卫星和星敏感器辅助的冗余激光陀螺捷联惯组进行实时在轨标定.利用标准Kalman滤波和Sage-Husa自适应滤波作为估计算法,对十表冗余捷联惯组参数进行在线估计.数值仿真结果表明:参数标定精度均在7％以内,是一种实时的在轨标定方法,满足误差补偿要求.冗余惯组在轨标定方法为航天器高精度定姿和定轨提供了一种理论参考.     

基于任务场景分析的机载导航页面人机界面设计过程研究

顶层飞行任务场景是民机机载显示系统需求捕获的重要来源,显示系统的人机界面设计通过自顶向 下的飞行任务场景分析,识别显示信息内容,开展信息内容设计,继而开展样式设计、交互行为设计与接口设 计等工作。本文以导航页面为例,综合运用层次任务分析和场景用例分析法,阐述了机载显示系统人机界面的 设计约束和过程,可为民机机载显示系统人机界面的正向设计过程提供借鉴。 [ 关键词] 机载显示系统;导航页面;任务场景;人机界面设计