双级氨—水吸收式制冷循环分析

对双级氨－水系统的性能进行了研究，讨论了中间压力和循环工况对系统性能系数的影响，分析了最佳中间压力随循环工况的变化。从分析可以看出对于给定的循环工况存在着一个最佳的中间压力，并对中间压力的选取给出了近似公式。     

十一组元高温平衡、非平衡空气光谱吸收系数计算

飞行器以很高的马赫数再入大气层时 ,头部激波层、尾迹的气体辐射产生的紫外、可见、红外特征信号 ,是地面监测和反导制导系统探测、识别的主要依据 ;同时 ,头部气体层热辐射也是再入体壁面加热热流的重要源项。激波层内高温气体吸收系数是目标紫外、可见光、红外辐射特性计算、热防护计算和气动流场辐射场耦合计算的基本参数。本文分析了再入过程中高超声速稀薄气体流的非平衡现象 ,采用三温度模型 (电子能温度 Te、振动能温度 TV、转动和平动能温度 TR)来表征激波层内非平衡态的气体组份各个能级占有数分布 ,并由原子分子辐射理论直接计算 N2 ,N+ 2 ,N,N+ ,O2 ,O+ 2 ,O,O+ ,NO,NO+和 e-等 1 1种主要空气组元各种能级跃迁对辐射的贡献 ,最终得到平稀和非平衡高温空气吸收系数计算模型。计算结果可见光区与试验结果符合较好 ,紫外、红外区结果稍差     

废水处理中吸附材料的研究

研究用于废水处理的新型吸附材料（活性粉煤灰）。探明了这种新材料在实验条件范围内较好地符合Ｌａｎｇｍｕｉｒ等温吸附规律；并对废水中污染物有较好的去除效果。     

Method of the HF wave absorption evaluation based on GIRO network data

High frequency (HF) communication is strongly dependent on the state of the ionosphere, which specifies the mode structure of the radio wave propagating in ionosphere. Another core factor defining the strength of the HF signal at the receiving site is the ionospheric absorption. Accurate modelling the effect of absorption is an essential part of many studies of the HF propagation in the ionosphere.This paper proposes a method for estimating the absorption. The method is based on analysis of vertical sounding ionograms. The main idea of the approach is to compare the main parameters retrieved from measured and simulated ionograms. The combination of Global Ionospheric Radio Observatory (GIRO, http://giro.uml.edu) data and ionograms modelling allows for developing the empiric absorption model available at near real-time. The ionogram simulation taking into account absorption utilizes the NIM-RT (North Ionospheric Model and Ray Tracing) software. As a result, the proposed technique provides more reliable and accurate evaluation of minimum frequency at which echoes are observed in vertical incidence ionosonde soundings. The values of these frequencies should be used in the following simulation to optimize parameters in the empirical formulae for defining absorption HF wave in ionosphere.The ultimate objective of this work is the designing the method, which allows the simulating of HF radio channel accounting for regular absorption due to UV radiation of the Sun. Eventually it could be considered as some kind of the HF propagation forecasting.     

Study the behavior of the ionospheric frequencies at Karachi during three consecutive solar minima of cycle 21, 22 & 23 and their comparison with IRI-2016

The behavior of critical frequencies of ionospheric E and F2 layers (foE & foF2) along with minimum ionospheric frequency (fmin) is studied for solar minima of cycle 21 (1986), 22 (1996) and 23 (2008) over Karachi (24.95$°$N, 67.13$°$E), Pakistan. The station is located at the crest of equatorial ionization anomaly region. Beside seasonal differences, pronounced change in the values of frequencies is noted from one solar minimum to another solar minimum. A strong and direct correlation of foF2 with Smoothed Sunspot Number (SSN) and F10.7?cm solar flux is observed. In the minimum of cycle 23, reduction in foF2 is noted due to reduction of solar EUV as compared to other minima. Also disappearance of semi-annual variations in foF2 is noted in cycle 23 minimum. Unexpectedly higher values of foE and fmin are observed in minimum of cycle 23 as compared to other minima. It is difficult to explain this unusual behavior of fmin and foE along with disappearance of semi-annual variation in foF2. It is possible that during very low solar activity, thermospheric conditions are changed which in turn altered the ionosphere. Further investigation of atmosphere-ionosphere coupling is required to understand this complex behavior. On comparison of observed values with IRI-2016, higher deviations are observed in foE before noon hours while in case of foF2, large deviations are noted during daytime. The absence of foF2 semi-annual variation in cycle 23 is not reproduced by IRI-2016. It is suggested that IRI-2016 need some modification for extremely low solar activity condition.     

导航卫星原子钟舱温度控制方法及其验证

原子钟是导航卫星的重要组成部分,可为卫星系统提供高准确及高稳定度的时间频率源.原子钟工作性能与环境温度变化密切相关,为保证其在轨连续、稳定运行,热控系统需为其提供良好的工作温度环境.本文以某导航卫星原子钟舱温度控制为研究内容,给出原子钟舱热控设计方案、控制算法,并进行仿真分析和试验验证.在轨遥测数据表明,卫星原子钟舱热控方案和控制算法设计合理,仿真分析及试验结果有效,各原子钟在轨工作温度满足要求,原子钟温度稳定度满足并优于设计指标近一个数量级.     

铷光谱灯老化自动测试设备研制与应用

介绍了铷光谱灯老化自动测试设备的研制与应用,应用ATE技术实现了铷光谱灯的批量老化及长期自动测量,为筛选评估提供数据,解决了高性能铷原子钟的产品化研制和小型铷原子钟批量生产中的重要问题。系统功能完善、测量准确度高、软件界面清晰、操作简单,有效改进了铷原子钟研制生产的工艺水平,提高了研制生产过程的信息化程度。     

An investigation of the solar cycle impact on the lower thermosphere O(S) nightglow emission as observed by WINDII/UARS

The yearly variation of the integrated emission rate of the O(¹S) nightglow in the lower thermosphere is studied and the solar cycle impact is examined from the observations of the Wind Imaging Interferometer (WINDII) operated on the Upper Atmosphere Research Satellite (UARS). More than 300,000 volume emission rate profiles of the O(¹S) nightglow observed by WINDII for 40°S–40°N latitudes during November 1991–August 1997 over half of a solar cycle are utilized. These profiles are vertically integrated for the altitude range of 80–100 km and the equivalent column integrated emission rates are then zonally averaged for bins with 10° latitude and 3 month intervals. It is found that for each latitude the O(¹S) nightglow emission rate appears to increase with increasing solar F10.7 cm flux, following a linear relationship. This characterizes the solar cycle impact on the O(¹S) nightglow, while the solar influence is modulated by a seasonal variation. Based on these variations, an empirical formula is derived for predicting the three-month averages of the O(¹S) nightglow integrated emission rate. The standard error of the estimated values from the formula is smaller than 30 Rayleigh.     

基于二级声辐射模型的地面声场高效预测方法

建立了可用于直升机运动状态下噪声传播特性分析的高效地面声场预测方法。该方法包括计算旋翼气动、噪声的自由尾迹方法和时域FW-H方程;计入大气、地面等环境因素的声传播模型及地面声场计算模型;为提高计算效率,在声源计算与噪声传播之间引入基于“紧致球声源”的二级声辐射模型;在此基础上,还提出了通过建立“特征参数声辐射球库”以实现直升机运动状态下噪声实时预测的方法。以AH-1旋翼为算例,通过与地面声场直接计算法对比,说明了方法的有效性及高效性;此外,文中还分析了大气、地面等环境因素对噪声传播以及地面声场特性的影响。      

薄膜二次表面镜热控涂层的辐射物性分析

认识热控涂层的热辐射物性对航天器热控制设计具有重要指导作用。文章根据薄膜二次表面镜涂层的吸收与反射过程分析,建立模型方程,结合已有的太阳吸收比、红外发射率等表观数据,采用非线性参数最小二乘法获得了薄膜材料的吸收系数和反射率等辐射物性,并分析了厚度对热控涂层太阳吸收比和红外发射率的影响。研究结果表明,聚酰亚胺薄膜对太阳光的表面反射率为0.571,吸收系数为19.343 mm-1,对红外辐射的表面反射率为0.227,吸收系数为39.615mm-1;F46薄膜对太阳光的表面反射率为0.744,吸收系数为0.757mm-1,对红外辐射的表面反射率为0.111,吸收系数为9.240mm-1。