Physical mechanism of the vertical electric field generation over active tectonic faults

The concept of the Global Electric Circuit (GEC) provides an explanation of the existence of a vertical atmospheric electric field and coupling between the ground and ionosphere. Presently, ionospheric physics pays more attention to electric fields and coupling processes in the polar and auroral regions, whereas in other areas the potential difference between the ground and ionosphere usually is not taken into account. Regional processes exist, however, that are able to significantly affect the GEC parameters and through modification of the ionospheric potential to create plasma density irregularities of different scales within the ionosphere. One such source of ionosphere modification is air ionization in the vicinity of active tectonic faults, which takes place due to increased radon emanation. This paper considers the process of local modification of the GEC and corresponding ionospheric variability due to tectonic activity.     

Cosmic ray studies at Moussala – Past,present and future

We review the main activities carried out at Moussala peak (2925 m above sea level, 42°11′N, 23°35′E) station in Bulgaria, connected with cosmic ray investigations during the last five decades. Several important results obtained at the station are reported. The detector design and corresponding methodological studies of the presently operational devices are shown as well, precisely the Cherenkov light telescope, lead free neutron monitor and muon telescope. The scientific potential of the existing complex is discussed.     

Streamwise vortex generation by the rod

The technology development related to aerodynamics is leading to ever increasing loads of wings, airfoils and turbine and compressor blades. The increase in aerodynamic forces is often leading to flow separation and depreciation of the aerodynamic performance of flying objects or propulsion systems. Flow control methods are required to avoid these negative effects. In the recent two decades the flow control by means of air-jet vortex generators has been also intensively investigated. In this method a streamwise vortex is introduced by an oblique jet. The necessity to supply air by a pipe system may be considered a disadvantage. In order to eliminate this feature, it has been proposed to put out a rod instead of a jet. It has been shown that the application of a rod can introduce the same effect as a jet, as long as the streamwise vortex generation is concerned and appropriate dimensions are used. The present paper focuses on the influence of rod vortex generators on a flow pattern downstream. The results presented here concern experimental and numerical investigations and provide guidelines for the design of a new flow control method dedicated mainly to external flows.     

螺旋爆轰内部胞格结构实验探索

为研究螺旋爆轰胞格结构,选取预混气C2H2+2.5O2+85％Ar,C2H2+2.5O2+70％Ar与C2H2+5N2O在光滑管中进行爆轰实验,使用烟膜记录管道侧壁与端面胞格结构.编写MATLAB程序处理烟膜记录,比较侧壁横波间距、端面胞格直径平均值,以及相邻端面胞格中心点距离平均值与标准差.其中,侧壁横波间距明显大于...     

非线性两点边值问题的六阶三对角差分法

讨论了满足边界条件y(a)=A 和y(b)=B 的二阶非线性常微分方程y″=f(x,y)的六阶三对角差分法,并从理论和实际计算证明了该方法的六阶收敛性。     

弯曲激波压缩型面的设计及数值分析

分别采用等压缩角和递增压缩角的小折线构成压缩型面。研究了二维均匀超声来流流过压缩面时的波后超声流场,结果表明,该方法能够形成弯曲激波且波后气流沿流向的壁面静压近似为等压力梯度,其等压力梯度程度取决于各小折线压缩角的配置。采用该方法生成的曲面压缩型面进气道附面层稳定性好,优于常规的平面压缩进气道。与二维常规平面压缩进气道相比,设计工况下,性能相当;非设计工况下,性能优于二维常规平面压缩进气道。     

端壁抽吸位置对压气机叶栅角区分离控制的影响

以某高负荷压气机叶栅为研究对象,应用数值模拟方法探索了叶栅端壁不同抽吸位置对角区流动结构、通道漩涡发展过程以及叶栅性能的影响规律,寻求控制角区分离的可行方法。研究结果表明:在叶栅前缘上游5%C(弦长)位置实施抽吸,延缓了通道涡的形成,但导致叶栅来流攻角发生改变,在角区形成角区分离涡,并且该漩涡与通道涡相互促进,进一步恶化叶栅流场,导致叶栅落后角增大,损失增加;在叶栅通道激波后25%C端壁抽吸,吸除了上游端壁积累的高熵低能气流,制约了通道涡的迅速发展,改善了叶栅通道的流场结构,降低了流动损失,但并未对上游流场产生较大影响,是一种可行的方案。然而25%C处抽吸后,未能完全消除分离,在端部与叶栅通道主流之间存在较高损失区域。     

用固体吸附/分光光度法同时监测空气中的肼、一甲肼和偏二甲肼

介绍了用一甲肼浓缩采样采集空气中三肼混合气体,用分光光度法分别测出肼、一甲肼和偏二甲肼各组分的含量。测定结果通过标准气验证,相对误差小于１７％,各组份回收率均大于８０％。本方法适用于空气中低浓度三肼废气的测定。     

二次流动对气冷涡轮叶栅流场的影响

针对典型跨声速高压涡轮叶型平面叶栅吸力面单排孔气膜冷却,采用数值模拟方法,比较分析了加入气膜冷却前后流场变化。结果表明,由于二次流动的影响,加入气膜冷却以后吸力面后部接近下壁面处没有受到冷气保护而直接暴露于主流高温燃气,在实际高压涡轮中将极大的降低叶片寿命。没有气膜冷却情况下,吸力面接近下壁面处边界层仍有可能因受到二次流动的影响发生转捩;加入气膜冷却情况下,气膜孔中心位置下游边界层由于射流和主流的相互作用将转变为湍流边界层,而由于孔间距的影响,只有射流和主流充分掺混以后才能影响到整个叶片的范围。     

原子层热电堆热流传感器在激波风洞试验中的应用

高超声速边界层转捩及激波-边界层干扰等基础气动问题的风洞试验中,高频脉动热流是一重要测试量.为了验证自研的原子层热电堆热流传感器在实际风洞试验环境中的性能,利用尖锥模型在Φ2m激波风洞(FD-14A)内开展来流马赫数10、单位雷诺数4.7×106/m等流场条件下的风洞试验,并与高频脉动压力传感器对比,热流测试结果反映出...