涡轮泵转子的临界转速研究(Ⅳ)分布质量轴的传递矩阵法

根据旋转的 Timoskenko梁的运动微分方程式 ,导出分布质量轴段的 4× 4阶精确传递矩阵 ,计入轴分布质量的平动惯量、转动惯量、陀螺力矩和剪切变形的影响 ,并计算了三个转子的临界转速。算例的计算结果表明 ,轴模型是否按分布质量考虑、是否计入平动惯量、转动惯量、陀螺力矩和剪切变形 ,对临界转速有明显的差别 ;同时在等截面轴不分段情况下 ,传递矩阵的计算结果和精确解一致性很好 ,表明计算实际转轴临界转速时 ,只需按截面不同划分轴段 ,即所取的轴分段数量少 ,就可以达到很高的计算精度     

冲压发动机伴随蒸发过程的两相流流场计算

为了计算固液混合式火箭冲压发动机补燃室内带有燃料液滴的流场,用块隐式法计算气相流场,用分离流连续介质模型计算颗粒相的流动与蒸发过程,在控制方程组的联合求荽中,采用特定的算法来体现颗粒相的质量守恒律与尺寸的变化。算例表明,迭代过程能够快速收敛,计算结果定性正确。     

摩托车发动机机加柔性生产线工艺设计

技术改造实施成功与否,很大程度取决于该项目的工艺设计水平。本文从柔性生产线工艺设计依据、指导思想、主要设计内容,以及生产线总体技术水平和经验教训等方面,较详细地介绍了摩托车发动机机加柔性生产线工艺设计的全过程。     

流量调节器管路系统自激振荡特性研究

流量调节器管路系统在小流量大压降工况下会出现低频自激振荡现象.为了深入认识自激振荡产生机理,结合某稳流型流量调节器及管路系统,基于流量调节器弹簧振子动力学模型开展数值仿真研究.数值仿真得出自激振荡频率为94Hz,与发动机试验结果一致.分析了流量调节器结构参数对系统稳定性的影响作用,三角形滑阀节流口能够抑制管路系统自激振...     

加力燃烧室壁温测量试验研究

加力燃烧室燃烧段的壁温对飞机和发动机的安全关系重大,单靠数值计算是很不够的,目前主要靠测试取得。燃烧段通常是双层壁,加风罩则为三层。本文介绍了内外壁和风罩的温度测量方法及其试验研究。该方法对加力燃烧室的研制具有重要意义,无论是对于新机还是批生产发动机都有重要的参考价值。     

试车数据驱动的涡轴发动机起动过程模型辨识

针对传统的采用解析法建立涡轴发动机起动过程模型复杂的问题,提出了一种基于变步长萤火虫算法优化的有外部输入的非线性自回归网络(CSFA-NARX)的涡轴发动机起动过程模型辨识方法。以涡轴发动机起动过程试车试验数据为数据样本,利用CSFA-NARX网络模型辨识得到涡轴发动机起动过程模型,并采用留一交叉验证方法对辨识模型的性能进行验证。结果表明：得到的辨识模型输出参数,如燃气发生器转速n_g、输出轴转速n_r和涡轮后温度T₄都较好地逼近了试车实测数据,各参数验证样本最大相对误差平均值分别为0.90%、1.51%、和2.01%;在相同训练与验证样本情况下,得到的辨识模型精度优于采用萤火虫算法优化的NARX网络(FA-NARX)、NARX网络和变步长萤火虫算法优化的BP网络(CSFA-BP)模型精度。     

飞机发动机短舱降载轻量化设计方法研究

为了进一步提升发动机短舱的传载效率,通过研究国内外飞机发动机短舱安装及载荷传递路径,同时借鉴、比对了成熟的国内外发动机短舱结构连接形式,以飞机的发动机短舱为研究对象,采用三维数字建模、有限元仿真等分析方法,建立了短舱传递和不传递发动机扭矩的两种结构形式,并对短舱参与传载比例进行了计算分析,最终通过试验验证了轻量化新结构形式的有效性,实现了基于柔性连接结构设计技术的发动机短舱降载轻量化目标,为进一步工业化、批产化提供技术支持。     

某型发动机进口压力畸变实验研究与分析

发动机进口流场畸变是影响发动机稳定性的一个很关键的降稳因子,而进口压力场周向分布不均匀对燃气涡轮发动机的稳定工作范围有很大影响.通过对某型涡喷发动机进行进口压力畸变模拟实验,探讨了发动机进口流场压力畸变的实验程序和方法,通过对实验数据的分析和处理,确定了该型发动机的稳定性对进气压力畸变的敏感程度.     

Integration of high-fidelity model of forward variable area bypass injector into zero-dimensional variable cycle engine model

Forward Variable Area Bypass Injector (FVABI) is one of key components which contributes to modulate the cycle parameters of Variable Cycle Engine (VCE) under various operation conditions. The modeling method of zero-dimensional FVABI was reviewed and its deficiency was analyzed based on FVABI flow characteristic. In order to improve the accuracy of VCE performance simulation, the high-fidelity modeling method of FVABI was developed based on its working characteristics. Then it was coupled with the zero-dimensional VCE model and the multi-level VCE model was built. The results indicate that the geometric and aerodynamic parameters can affect the interaction between the two airflows and the zero-dimensional FVABI model is too simple to predict the component performance accurately, especially when the FVABI inner bypass is chocked. Based on the performance curves for single bypass mode and the regression model of multi-scale support vector regression for double bypass mode, the high-fidelity model can predict FVABI performance accurately and rapidly. The integration of high-fidelity FVABI model into zero-dimensional VCE model can be done by adjusting iterative variables and balance equations. The multi-level model has good convergence and it can predict VCE performance when the FVABI inner bypass is chocked.     

Effect of scavenge port angles on flow distribution and performance of swirl-loop scavenging in 2-stroke aircraft diesel engine

Swirl-Loop Scavenging (SLS) improves the performance of 2-stroke aircraft diesel engine because the involved swirl may not only benefit the scavenging process, but also facilitate the fuel atomization and combustion. The arrangement of scavenge port angles greatly influences in-cylinder flow distribution and swirl intensity, as well as the performance of the SLS engine. However, the mechanism of the effect and visualization experiment are rarely mentioned in the literature. To further investigate the SLS, Particle Image Velocimetry (PIV) experiment and Computational Fluid Dynamics (CFD) simulation are adopted to obtain its swirl distribution characteristics, and the effect of port angles on scavenging performance is discussed based on engine fired cycle simulation. The results illustrate that Reynolds Stress Turbulence model is accurate enough for in-cylinder flow simulation. Tangential and axial velocity distribution of the flow, as well as the scavenging performance, are mainly determined by geometric scavenge port angles α_geom and β_geom. For reinforcement of scavenging on cross-sections and meridian planes, α_geom value of 27° and β_geom value of 60° are preferred, under which the scavenging efficiency reaches as high as 73.7%. Excessive swirl intensity has a negative effect on SLS performance, which should be controlled to a proper extent.