高温高速气流总焓接触测试法对比分析

发动机尾焰、燃烧加热、电弧加热器等高温高速气流总焓测量存在较大误差,采用结构优化的质量吸入水冷焓探针,标定后的驻点热流和驻点压力探针(Fay-Riddell公式法)对高温高速气流总焓进行了对比测试。结果表明:焓值为2.5~5 MJ/kg时,焓探针的测试误差约为3.38%,采用Fay-Riddell公式法获得焓值的误差约为3%。焓探针与Fay-Riddell公式法平均偏差约为4.65%。在地面模拟试验时采用两种测焓方法确定测试精度,对减小高温高速气流测焓误差,提高试验模拟精度具有积极的作用。     

Optimization and verification of free flight separation similarity law in high-speed wind tunnel

Based on the similarity of separation time, a similarity law optimization method for high-speed weapon delivery test is derived. The typical separation state under wind load is simulated by the numerical method. The real separation data of aircraft, separation data of previous test methods, separation data of ideal wind tunnel test of previous methods, and simulation data of the proposed optimization method are obtained. A comparison of the data shows that the method proposed can improve the performance of tracking. Similarity law optimization starts with the development of motion equations and dynamic equations in the windless state to address the problems of mismatching between vertical and horizontal displacement, and to address the problems of separation trajectory distortion caused by insufficient gravity acceleration of the scaling model of existing light model. The ejection velocity of the model is taken as a factor/vector, and is adjusted reasonably to compensate the linear displacement insufficiency caused by the insufficient vertical acceleration of the light model method, so as to ensure the matching of the vertical and horizontal displacement of the projectile, and to improve the consistency between the test results of high-speed projection and the actual separation trajectory. The optimized similarity law is applicable to many existing free-throwing modes of high-speed wind tunnels. The optimized similarity law is not affected by the ejection velocity and hanging mode of the projectile. The optimized similarity law is suitable not only for the launching of the buried ammunition compartment and external stores, but also for the test design of projectile launching and gravity separation.     

用于光波纳米推力器的颗粒供应技术和光聚积技术研究

为提高光波纳米推力器在轨应用的可行性,针对与其匹配的颗粒供应技术和光聚积技术进行研究。提出整个推进系统的设计思路,通过建立理论计算和数值计算模型,分析颗粒供应技术和光聚积技术的各项核心结构参数的设计方法。计算结果表明:颗粒供应装置的正负电极内径之比(W/D)会影响正负电荷产生的总量之比,在W/D=300/322附近时,正负电荷比例接近1:1。静电诱导电压为9 V,当中和通道长度大于37.5mm时,正负颗粒可以视为完全中和。光聚积设计思路可令聚积球对光能的利用率在32.8%左右。两种相关技术的装置与推力器在结构上能够对接、在性能上可以匹配,从理论上表明了两种支撑技术的可行性。     

舰载直升机理论风限图飞行模拟获取方法

获取舰载直升机实用风限图,仅依靠实装飞行试验或建模仿真都是非常困难的。通过起降飞行模拟试验获取理论风限图,结合少量的海上实装飞行验证试验是一种综合较优的方法。起降飞行模拟试验需要真实飞行员和高等级飞行模拟器参与,飞行模拟器中的母舰气流场数据、母舰运动可由建模仿真或试验测试得到,且必须考虑母舰气流场的非定场特性;只有当飞行员视景或视觉反馈受限时(如能见度降低时),飞行模拟器基座的六自由度运动才是必需的;用DIPES或Bedford方法量化飞行员主观操纵负担,结合记录的客观操纵数据,评判起降难度;典型的飞行模拟试验程序包含了不同风况下的进近和甲板着舰,通常每隔15°和5kn一个风况。通过起降飞行模拟试验得到的理论风限图,可以更加有效和安全地指导海上实装飞行验证试验,最终获得实用风限图。     

基于拓扑优化和形状优化的桨叶结构设计

直升机旋翼桨叶剖面结构设计是研究旋翼动力学设计的基础。提出一种联合拓扑优化和形状优化的 两级优化设计方法,可用于桨叶剖面结构的设计。第一级优化以变密度法(SIMP)作为拓扑优化的材料插值方 法,以桨叶体积最小化为设计目标,约束桨叶节点位移和应力,建立桨叶的拓扑优化求解模型;第二级优化以重 构的桨叶模型为基础开展形状优化,降低局部应力集中以及找到合理的边界节点位置。对优化后的模型进行 有限元分析,结果表明:通过拓扑优化和形状优化的两级优化,能够得到满足强度和稳定性要求的结构布局,为 桨叶结构设计提供指导方案。     

试论高职院校对企业文化资源的利用

如何充分利用企业资源,有效开展工学结合、产学合作是各高职院校共同面临的课题和任务。就企业文化资源在高职院校办学和教育教学改革过程中的独特性及高职院校如何利用企业文化资源来培养技术技能型人才问题,作一些初步的分析和论述,希望引起教育研究者的思考和各类办学主体的重视。     

雷达信号时差频差测量定位工程实现技术研究

针对星载时差频差无源定位系统对地海面雷达信号定位工程实现需要考虑的实际问题,对雷达信号时差频差测量关键技术进行研究.首先研究了雷达信号时差频差测量方法,然后研究了双星时差频差模糊条件并提出解模糊方法,最后,研究了长时间积累对到达频差的影响,给出随时间变化频差补偿方法.     

基于高速存储平台的高性能RS编译码器设计

目前,星载高速存储设备中采用商用RS编译码IP核来实现数据纠错功能,能够实现的编译码最高速率为800 Mbps,只能依靠多个IP核同时工作达到吉比特高速数据存取速率的要求。星载存储数据发生错误的主要原因是存储区单粒子翻转和存储介质本身特性产生的单比特数据错误。针对星载存储数据的误码特性,本文提出一种RS编译码改进算法,通过对编码算法中的剩余多项式及译码算法中的伴随多项式进行降次处理,减小编译码过程中运算的迭代次数及计算量,以及对编译码算法中的基本运算单元有限域乘法器采用子项复用技术,实现对传统RS编译码算法的改进。结果表明改进后的编译码器能达到最高数据速率为10.5 Gbps,编码器资源较单个商用IP核减少15%,译码器资源减少40%,能够满足后续高速存储平台的应用要求。     

A review of topology optimization for additive manufacturing: Status and challenges

Topology optimization was developed as an advanced structural design methodology to generate innovative lightweight and high-performance configurations that are difficult to obtain with conventional ideas. Additive manufacturing is an advanced manufacturing technique building as-designed structures via layer-by-layer joining material, providing an alternative pattern for complex components. The integration of topology optimization and additive manufacturing can make the most of their advantages and potentials, and has wide application prospects in modern manufacturing. This article reviews the main content and applications of the research on the integration of topology optimization and additive manufacturing in recent years, including multi-scale or hierarchical structural optimization design and topology optimization considering additive manufacturing constraints. Meanwhile, some challenges of structural design approaches for additive manufacturing are discussed, such as the performance characterization and scale effects of additively manufactured lattice structures, the anisotropy and fatigue performance of additively manufactured material, and additively manufactured functionally graded material issues, etc. It is shown that in the research of topology optimization for additive manufacturing, the integration of material, structure, process and performance is important to pursue high-performance, multi-functional and lightweight production. This article provides a reference for further related research and aerospace applications.     

基于位移和力值组合的静重式力标准机砝码加卸载控制方法研究

介绍了一种基于位移和力值组合的静重式力标准机砝码加卸载的控制方法,通过监测砝码的移动量和参考力传感器叠加系统的力值量,实时调整加卸载机构的加卸载速度,以实现对被检力传感器的平滑加卸载的目的。该方法有效解决了吊挂在加载过程中产生较大摆动,影响力标准机复现力值准确度的问题,同时也消除了力值过冲现象,避免了因逆程效应而导致的力传感器输出偏差。