熔铝氧化渗透合成SiC_p/Al_2O_3-Al复合材料的微观结构分析

以低成本的熔铝氧化渗透合成新方法制备了SiCp/Al2 O3 Al复合材料。借助X光电子谱 (XPS)、光学金相显微镜、透射电镜 (TEM)、X射线衍射 (XRD)等手段研究了该种复合材料的微观结构 ,并分析了影响微观结构的主要因素及其影响规律。结果表明 ,Al2 O3 和Al作为复合材料基体呈双连续分布 ,它们各自的含量可在较大范围内受SiC颗粒的粒度所控制。在熔铝氧化渗透合成的SiCp/Al2 O3 Al复合材料中 ,各组成相之间无界面反应 ,也无晶间相 ,Al2 O3 在SiC颗粒表面二次形核并直接生长的现象普遍存在 ,并由此形成了具有良好物理冶金结合的Al2 O3 SiC一体化陶瓷骨架     

超硬铝合金的微观组织和力学性能的研究

超硬铝合金是飞机制造业中广泛应用的一种结构材料,但目前对于国产和进口超硬铝合金板材的组织与性能之间的差异尚不清楚.为此,针对国产7B04超硬铝合金板材以及具有相同化学成分的俄罗斯进口B95ПЧ超硬铝合金板材分别进行了微观组织观察、室温拉伸性能测试,确定了国产7B04和俄罗斯进口B95ПЧ超硬铝合金板材的室温抗拉强度、屈服强度、断裂延伸率,并主要针对国产7B04和俄罗斯进口B95ПЧ超硬铝合金板材在工业状态下的微观组织、室温力学性能进行了比较.     

The Marginal Rao-Blackwellized Particle Filter for Mixed Linear/Nonlinear State Space Models

In this paper, the marginal Rao-Blackwellized particle filter （MRBPF）, which fuses the Rao-Blackwellized particle filter （RBPF） algorithm and the marginal particle filter （MPF） algorithm, is presented. The state space is divided into linear and non-linear parts, which can be estimated separately by the MPF and the optional Kalman filter. Through simulation in the terrain aided navigation （TAN） domain, it is demonstrated that, compared with the RBPF, the root mean square errors （RMSE） and the error variance of the nonlinear state estimations by the proposed MRBPF are respectively reduced by 29% and 96%, while the unique particle count is increased by 80%. It is also found that the MRBPF has better convergence properties, and analysis has shown that the existing RBPF is nothing more than a special case of the MRBPF.     

适合航空航天用SiCp/Al复合材料的性能

采用粉末冶金法制备了Φ300 mm的15%(体积分数)SiCp/A l复合材料坯锭,研究了热挤压、锻造后的材料力学性能以及断裂特点。结果表明,该材料的弹性模量在97 GPa、拉伸强度保持在550 MPa的水平下,延伸率仍高达7%左右,旋转弯曲疲劳强度在250~290 MPa范围内,断裂韧性为25 MPa.m1/2,冲击韧性为62.5 kJ/m2。与棒材挤压态相比,T4态复合材料拉伸强度和屈服强度分别提高66.7%和100%,但塑性保持在同一水平。断口观察表明,挤压态复合材料以基体韧性断裂为主要形式,而T4态复合材料除了基体韧性断裂外,还存在SiC颗粒断裂现象。挤压棒材锻造后有利于提高材料的横向强度。     

3He-Rich Solar Energetic Particle Events

³He-rich solar energetic particle (SEP) events show huge enrichments of ³He and association with kilovolt electrons and Type-III radio bursts. Observations from a new generation of high resolution instruments launched on the Wind, ACE, Yohkoh, SOHO, TRACE, and RHESSI spacecraft have revealed many new properties of these events: the particle energy spectra are found to be either power-law or curved in shape, with the ³He spectrum often being distinctly different from other species. Ultra-heavy nuclei up to >200 amu are found to be routinely present at average enrichments of >200 times solar-system abundances. The high ionization states previously observed near ∼1 MeV/nucleon have been found to decrease towards normal solar coronal values in these events. The source regions have been identified for many events, and are associated with X-ray jets and EUV flares that are associated with magnetic reconnection sites near active regions. This paper reviews the current experimental picture and theoretical models, with emphasis on the new insights found in the last few years.     

Imaging diagnostics of solar non-thermal particles

Non-thermal hard X-ray, gamma-ray and radio emission are the most direct signatures of the presence of energetic particles in the solar atmosphere. This paper lays emphasis on hard X-ray and radio imaging data, obtained during and outside flares, which reveal the sites where particles interact with the ambient medium. These observations, which provide more or less direct information on the topology and dynamics of the magnetic structures in which particles are accelerated and propagate, are discussed in the framework of the statistical flare scenario.     

喷丸处理对铝锂合金激光焊接结构性能的影响

为解决铝锂合金焊后性能弱化问题,推进双激光束双侧同步焊接工艺在国产民用飞机壁板制造中的应用,研究了焊后喷丸、固溶时效热处理+喷丸处理两种共3组焊后强化工艺,通过静力拉伸、疲劳及表面应力状态测试分析,评估强化效果,探讨强化机制。结果显示:纯喷丸强化可显著提高疲劳性能,其中0.20mmN喷丸后细节额定疲劳强度截止值DFRcutoff较焊态提高27.8%,但静力拉伸性能与焊态相差不大;0.36mmN喷丸后DFRcutoff提高了118.5%,但抗拉性能明显下降;热处理+喷丸的组合强化工艺对静力拉伸及疲劳性能均有明显提升,抗拉强度较焊态提高32%,DFRcutoff较焊态提高21.9%,综合性能较好。     

一种面向弹道再入目标跟踪的HPD-SRCQSPF算法

针对弹道再入目标轨迹跟踪问题,提出基于混合建议分布的平方根容积求积采样粒子滤波（HPD-SRCQSPF）算法,该算法以混合建议分布为框架,由两个基本建议分布组成。其中一个基本建议分布为先验分布,另一个基本建议分布为平方根容积求积卡尔曼滤波估计后的值。该混合建议分布与真实的后验分布很接近,因此有着高效性、高精度等特点。仿真结果表明,对于弹道再入目标轨迹跟踪模型,相比于标准粒子滤波（SPF）算法和平方根容积求积粒子滤波（SRCQPF）算法,HPD-SRCQSPF算法可以在较低运算负载的情况下获得更好的跟踪性能。特别是在弹道目标变轨机动的情况时,所提出算法的性能增益更为显著。     

激光选区熔化成形Ti6Al4V合金的热处理组织演变机理

激光选区熔化(SLM)Ti6Al4V成形构件需要通过热处理改善其塑性。为探究该过程中的组织特征和演变机理,研究了Ti6Al4V试样固溶时效热处理(910℃/8 h水冷,750℃/4 h炉冷)前后的微观形貌和力学性能。结果表明:沉积态的马氏体α′相尺寸具有层次结构;热处理相变时初生马氏体α′发生分解,小尺寸马氏体α′转变为β相,随后发生β→(α+β)转变,最后得到α相片层和精细(α+β)相结构均匀分布的组织;热处理后材料抗拉强度达1 055 MPa,延伸率提升至16.2%,均优于典型Ti6Al4V合金拉伸性能。采取的热处理技术对Ti6Al4V组织调控成效显著,满足后续工艺要求,可在激光选区熔化成形双相钛合金中推广应用。     

固体火箭冲压发动机技术研究进展

近年来,固体火箭冲压发动机获得飞快发展,本文综述了其技术研究进展,为后续固体火箭冲压发动机技术及相似技术的发展提供借鉴。主要介绍了固体火箭冲压发动机的燃气流量调节技术、贫氧推进剂技术、高效燃烧组织技术、转级技术等关键技术。总结发现国内外关键技术已取得了较全面突破,逐渐进入工程实用阶段,但燃烧基础问题研究不足。因此,有必要进一步深入开展推进剂细观燃烧、多相湍流燃烧、金属颗粒燃烧等基础科学研究,进而促进固体火箭冲压发动机技术发展。