Precise orbit determination for TH02-02 satellites based on BDS3 and GPS observations

The Tianhui-2 02 (TH02-02) satellite formation, as a supplement to the microwave mapping satellite system Tianhui-2 01 (TH02-01), is the first Interferometric Synthetic Aperture Radar (InSAR) satellite formation-flying system that supports the tracking of BeiDou global navigation Satellite system (BDS3) new B1C and B2a signals. Meanwhile, the twin TH02-02 satellites also support the tracking of Global Positioning System (GPS) L1&L2 and BDS B1I&B3I signals. As the spaceborne receiver employs two independent boards to track the Global Navigation Satellite System (GNSS) satellites, we design an orbit determination strategy by estimating independent receiver clock offsets epoch by epoch for each GNSS to realize the multi-GNSS data fusion from different boards. The performance of the spaceborne receiver is evaluated and the contribution of BDS3 to the kinematic and reduced-dynamic Precise Orbit Determination (POD) of TH02-02 satellites is investigated. The tracking data onboard shows that the average number of available BDS3 and GPS satellites are 8.7 and 9.1, respectively. The carrier-to-noise ratio and carrier phase noise of BDS3 B1C and B2a signals are comparable to those of GPS. However, strong azimuth-related systematic biases are recognized in the pseudorange multipath errors of B1C and B3I. The pseudorange noise of BDS3 signals is better than that of GPS after eliminating the multipath errors from specific signals. Taking the GPS-based reduced-dynamic orbit with single-receiver ambiguity fixing technique as a reference, the results of BDS3-only and BDS3 + GPS combined POD are assessed. The Root Mean Square (RMS) of orbit comparison of BDS3-based kinematic and reduced-dynamic POD with reference orbit are better than 7 cm and 3 cm in three-Dimensional direction (3D). The POD performance based on B1C&B2a data is comparable to that based on B1I&B3I. The precision of BDS3 + GPS combined kinematic orbit can reach up to 3 cm (3D RMS), which has a more than 25% improvement relative to the GPS-only solution. In addition, the consistency between the BDS3 + GPS combined reduced-dynamic orbit and the GPS-based ambiguity-fixed orbit is better than 1.5 cm (3D RMS).     

耐高温复合材料在火星探测器着陆器减速伞筒盖结构上的应用

针对火星探测器着陆巡视器减速伞筒盖结构在轨运行耐温度交变、辐照等空间环境和再入过程耐温度冲击性能需求,重点开展了筒盖复合材料耐温匹配性、力学性能、耐空间环境性能以及制件成型工艺研究。结果表明,选用J-168-1胶黏剂、J-245胶黏剂及T300/QY8911复合材料制备的试件通过各项性能试验考核,均能满足筒盖结构的设计指标要求。筒盖产品力学性能稳定,成型工艺可行性良好,最高瞬时使用温度可达200℃,经历空间环境模拟后力学性能保持率均在80%以上,耐高温、耐空间环境性良好。产品已成功装星发射,并在着陆巡视器落火阶段成功弹出分离,圆满完成使命。     

激光熔化沉积15-5PH沉淀硬化不锈钢组织及拉伸性能

利用激光熔化沉积技术制备15-5PH沉淀硬化不锈钢板,利用金相显微镜(OM)、扫描电镜(SEM)、透射电镜(TEM)、电子探针(EPMA)技术,对沉积态组织进行分析,测试沉积态组织的室温拉伸性能。结果表明:激光熔化沉积15-5PH不锈钢沉积态组织由沿沉积增高方向贯穿多层外延生长的柱状晶组成,柱状晶内包含多个细长整齐排列的胞状树枝晶,枝晶内为马氏体组织,枝晶间为铁素体;沉积态组织中弥散分布大量细小的NbC析出相,尺寸12～20 nm;15-5PH不锈钢沉积态组织具有良好的力学性能,纵向抗拉强度和延伸率分别为1 128.5 MPa和14.0%,横向抗拉强度和延伸率分别为1 101 MPa和12.25%。     

Hot Tearing Behavior of Mg-Gd-Y-X Alloys

Mg-Gd-Y-Zr alloy castings are widely used in the aerospace field owing to their high strength and excellent creep resistance. The castability of these alloys is also an important consideration for engineering application. Thus， the hot tearing susceptibilities (HTSs) of Mg-10Gd-1Y-1Zn-0.5Zr (VW91) alloy and Mg-10Gd-2Y-1Zn-0.5Zr (VW92) alloy are investigated with a constrained rod casting (CRC) mold. The microstructures and fracture surface are characterized by optical microscope and scanning electron microscope. The results unveil that the HTS of VW92 alloy is lower than that of VW91 alloy. The microstructures indicate that obvious tears can be observed in VW91 alloy， while the tears in VW92 alloy are tiny. The tear feeding and healing by eutectic are also observed in VW91 and VW92 alloys. Therefore， the lower hot tearing susceptibility of VW92 alloy is mainly attributed to the high amount of eutectic which feeds and heals tears. Besides， the effects of the coefficient of thermal expansion (CTE) and the fluidity of VW91 and VW92 alloys on their HTSs are discussed.     

基于硅基MEMS三维集成技术的片式多波束发射前端

基于多波束发射前端的相控阵,具有波束灵活扫描和多目标同时通信的能力,是低轨互联网通信卫星的重要微波子系统.采用硅基MEMS三维异构集成技术,将多个微波单片集成电路MMIC(Monolithic Microwave Integrated Circuit)和硅基MEMS功分交叉网络等无源结构一体化集成,实现了一种K频段8波...