复合材料飞机结构材料和设计许用值的确定方法

分析国内外复合材料飞机结构材料许用值、设计许用值的确定原则和方法,研究给出了复合材料结构材料许用值的表征和应用、试验以反试验数据的统计分析方法,以及静强度、疲劳强度、损伤容限和修理设计许用值的确定方法.     

飞机备件的供应保障

从装备的使用和维修的角度出发,介绍了飞机备件的选用原则和配置要求,给出了备件的确定、备件的种类及数量的计算方法,并介绍了国外常用后勤综合保障软件OPUS10,可供备件保障研究人员参考。     

面向飞机维护应用反馈系统的知识管理研究

提出了在飞机产品服务系统中建立应用反馈系统的需求,论述知识管理在飞机产品全生命周期管理应用反馈子系统中的作用,通过软件实现验证了知识管理在应用反馈系统中的重要性和必要性.     

Neural Network aided PMSM multi-objective design and optimization for more-electric aircraft applications

This study uses the Neural Network(NN) technique to optimize design of surfacemounted Permanent Magnet Synchronous Motors(PMSMs) for More-Electric Aircraft(MEA)applications. The key role of NN is to provide dedicated correction factors for the analytical PMSM mass and loss estimation within the entire design space. Based on that, a globally optimal design can be quickly obtained. Matching the analytical estimation with Finite-Element Analysis(FEA) is the main research target of training the NN. ...     

无余量装配技术在复合材料机身结构部段上的应用

提出了在复合材料飞机部段装配过程中采用无余量装配的方法。在产品设计和制造过程中采用数字量传递的方式可减少误差积累,提高协调精度。关键零部件的装配、工装制造等采用激光跟踪仪等数字化测量设备可以确保精确性,并能在装配工艺设计阶段就考虑零部件间的协调安装精度及公差分配要求。通过分析复合材料部段装配特点,并以复合材料机身典型结构为例进行应用研究,阐述了在三维数字化装配过程中具有协调关系的关键零部件无余量装配的工艺流程、方法,从而可实现零部件一次装夹、加工及无反复装配,使装配质量具有良好的稳定性。     

基于线结构光的飞机蒙皮对缝阶差与间隙测量技术研究

针对飞机蒙皮对缝阶差与间隙的数字化检测问题,以线结构光视觉测量技术为基础,提出了阶差与间隙测量模型,从阶差与间隙的尺寸和位置两个方面设计测量方法。使用线结构光视觉传感器完成阶差与间隙的尺寸测量,同时利用iGPS测量系统对视觉传感器的位姿进行实时跟踪测量,从而确定阶差与间隙的测量位置。通过试验验证了算法的正确性和稳定性,能够实现非接触、高精度测量:试验结果表明:5mm内阶差的重复测量精度优于0.04mm,间隙的重复测量精度优于0.05mm。     

面向自动化物料传送的被动驱动托架设计与分析

针对现有的航天飞行器数字化装配生产线产品转运自动化、装配数字化的发展趋势,设计了一套兼容生产线全流程转运工作设备、适应多几何尺寸的托架.在分析作业现场产品转运流程、保证要求以及装配需求的基础上,提出了一种基于辊杠动力源的被动驱动托架总体设计方案,解析了托架关键受力部位和薄弱点,有针对性地开展了关键部件的设计、计算、校核...     

浅析TB200型飞机与SR20型飞机的差异

本文以翼型结构、操纵系统、动力系统和仪表布局四个方面为出发点,阐述了TB200型初教飞机和SR20型初教飞机存在的差异,从机型理论和实际应用方面提出建议,以期为差异改装和教学训练提供帮助。     

JL8飞机重要口盖防雨设计的改进

针对JL8飞机部分重要口盖防雨存在的问题,在查找和分析原因的基础上,提出了解决重要口盖防雨设计的改进措施。     

A novel approach for predicting inlet pressure of aircraft hydraulic pumps under transient conditions

Cavitation caused by insufficient suction is a major factor that influences the life of aircraft pumps. Currently, pressurizing the tank can solve the cavitation problem under steady large-flow conditions. However, this method is not always effective under transient conditions (from zero flow to full flow in a very short time). Moreover, to apply and design other measures, such as a boost impeller, the suction dynamics during the transient period must be investigated. In this paper, a novel approach based on the pressure wave propagation theory is proposed for predicting the inlet pressure of an aircraft pump under transient conditions. First, a dynamic model of a typical aircraft pump is established in the form of differential equations. Then, the transient flow model of the inlet line is described using momentum and continuity equations, and the governing equations are discretized by the method of characteristics and the finite difference method. The simulated results are in good agreement with the results from verification tests. Further simulation analysis indicates that the wave velocity and transient time may influence the inlet and reservoir pressure as well as the size of the inlet line. Finally, solutions for upgrading the inlet pressure are discussed. These solutions provide guidelines for designing inlet installations.